Liniotech's user manual prints two cycle life figures. The Battery Specifications table prints "Life cycles(80% DOD, 25°C) 6500 Cycles"; the Key Features list of the same manual prints "6,000cycles/ 20 years’ service life" without a depth of discharge. The table's figure, which states its test conditions, is recorded.
Printed as "Life cycles(80% DOD, 25°C) 6500 Cycles" in the specification table. The same manual's Key Features list prints "6,000cycles/ 20 years’ service life", and the table prints a life time of 15 years at 25°C.
Where: Battery Specifications, Basic Parameters, Life cycles
Minimum clearances: above 300 mm, below 300 mm, sides 500 mm, front 300 mm
Printed as "Direction Minimum clearance (mm) Above 300 Below 300"; "Sides 500 Front 300" in the Power Storage Wall System user manual, version 2.0, Liniotech (pages 13, 14, section 5.2.1, Minimum clearances).
Where: PDF pages 13, 14, section 5.2.1, Minimum clearances
Charged Reviews classified this product from the documents it is based on. It is our own grouping, not a manufacturer claim.
Printed as "Wall-mounted, convenient installation" and "5.3.1.Mounting to a wall". Classified as Wall / floor from the maker's own words for this model.
Location: Power Storage Wall System user manual, version 2.0, Liniotech, features, page 4 and 5.3 Installing the Battery Pack, page 14
Communications
CAN; RS485
Printed as "BMS Port CANBUS/RS485" in the specification sheet; the user manual's front panel table lists a CAN/RS485 port for the inverter and an RS485A/RS485B port.
Where: Main specifications, BMS Port; Interface Introduction
Included power cable: 35 mm² (2 AWG), black and red, 2.0 m
Printed as "Power Cable 1 SET 35mm2 ( 2AWG) Black , Red L 2.0 meter" in the Power Storage Wall System user manual, version 2.0, Liniotech (page 12, section 5.1, Inventory of items).
Where: PDF page 12, section 5.1, Inventory of items
Printed as "please DO NOT connect battery in series" in the Power Storage Wall System user manual, version 2.0, Liniotech (page 2, section 1.1, Before Connecting).
CAN/RS485: connecting battery to inverter; RS485A/RS485B: parallel function or connecting smart BMS software with computer; DIP address switch (8 pins)
Printed as "CAN/RS485 CAN/RS485 Connecting battery to Inverter"; "RS485A/RS485B Parallel function or connecting smart BMS software with computer"; "DIP ADDRESS ADD 8 PINS" in the Power Storage Wall System user manual, version 2.0, Liniotech (page 5, section 3.2, Interface Introduction).
Where: PDF page 5, section 3.2, Interface Introduction
Vertical or tilted backwards by at most 15°; avoid forward or sideways tilt
Printed as "Installation must be vertical or tilted backwards by maximum 15°" in the Power Storage Wall System user manual, version 2.0, Liniotech (page 13, section 5.2, Installation Location).
Where: PDF page 13, section 5.2, Installation Location
Printed as "Storage temperature 0°C to 45°C @60+/-25% Relative Humidity"; storage time is printed as 5 months at 25°C, 3 months at 35°C and 1 month at 45°C.
Where: Battery Specifications, Basic Parameters, Storage temperature
Connect the battery positive and negative to the inverter via a DC isolator
Printed as "from the battery to the inverter via DC isolator" in the Power Storage Wall System user manual, version 2.0, Liniotech (page 7, section 3.4, Connectors).
Printed as "Operation temperature -20°C to 60°C @60+/-25% Relative Humidity". The specification sheet prints bare cell ranges instead (charge 0 to 45℃, discharge -20 to 55℃), which are not recorded here.
Where: Battery Specifications, Basic Parameters, Operation temperature
Printed as "Cut-off Discharge Voltage 46 Vdc" in the user manual and "Voltage at end of Discharge 46V Discharge Cut-off Voltage" in the specification sheet.
Where: Electrical Parameters, Cut-off Discharge Voltage
79.2 L* (Calculated enclosure volume: W × H × D in mm ÷ 1,000,000)W: 550 × H: 200 × L: 720 mm / W: 21.7 × H: 7.87 × L: 28.3 in102.5 kg / 226 lb0.13 kWh/L* (Rated or usable capacity shown on this card ÷ enclosure volume)
Evidence score
61/100Missing details65% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Warranty energy disclosure evidence needed; Lifetime / capacity evidence needed; Cell model disclosure evidence needed.
48 V · Wall / floor · Rated capacity
The warranty term and the lifetime energy are each scored against the best documented value for a home storage battery: a value earns its share of that best, times the weight. A documented value always earns points; an undisclosed one earns 0.
CertificatesCEC · UL 1973 +1CEC listed45 / 45
100 evidence points · 45% weight
CEC listing: full credit for the certificate criterion. Exact model found in the dated CEC equipment list. This is not a safety certification or system approval. Applies: CEC; UL 9540; UL 1973.
Printed as "12 years’ warranty" in the Key Features list and "factory warranty valid for 12 years from the date of delivery from factory" in the warranty section.
Research pending, 0 points: Warranty energy disclosure, Cell model disclosure.
Computed from public specifications and evidence records. Warranty duration is not service quality; certificate evidence points are not a safety rating. Compatibility and installation limits still apply.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
StandardEvidenceStatusSource
UL 9540Amanufacturer claimpresent at observation[5]
Scope
battery pack scope unverified
Covered models
LNT051200A-B-GBP2
Limitations
A manufacturer claim of compliance with a test method, not a certification or test report. Printed as "With a 12-year warranty and compliance with global standards (UL1973, UL9540A, IEC62619)" under "Safety and Durability" in the product description of Liniotech's own LINIOTECH 10 KWH Power Wall page (liniotech.com, SKU LINIOTECH10-1), captured October 2, 2026. Liniotech's Power Storage Wall user manual (version 2.0) lists "Lithium Battery Standard IEC62619,UN38.3,ROHS,CE-EMC,MSDS", and its specification for approval (Spec.No. LNT051200A-B-GBP2) prints no UL standard; both are cited on this record. UL 9540A is a test method, not a certification; the document does not say who ran the test. No test report number is printed; no report was checked.
CECauthority listing reportedlisted as of snapshot[3]
Scope
equipment listing
Covered models
LNT051200A-B-GBP2
Limitations
Model LNT051200A-B-GBP2 listed on the California Energy Commission Battery List (data unchanged since October 1, 2026; downloaded October 11, 2026) under Liniotech, as "LNT051200A-B-GBP2", CEC listing date 2023-08-01. This is an equipment listing, not UL certification or complete-system approval.
UL 1973authority listing reportedlisted as of snapshot[4]
Scope
equipment listing
Covered models
LNT051200A-B-GBP2
Limitations
Listed on the California Energy Commission Battery List (data unchanged since October 21, 2026; downloaded October 23, 2026) as Liniotech "LNT051200A-B-GBP2": UL 1973, certifying entity Intertek, certificate date 2023-04-27, Ed. 2 : 2018, CEC listing date 2023-08-01. A state equipment list entry, not the certification body's own record.
At the factory's discretion: battery repair, on-site battery repair, or exchange for a replacement device of equivalent value with regard to model and age
Printed as "--Battery repair or --Battery repair at on-site, or --Exchange for a replacement device" in the Power Storage Wall System user manual, version 2.0, Liniotech (page 19, section 6.5, Warranty conditions).
Where: PDF page 19, section 6.5, Warranty conditions
Printed as "valid for 12 years from the date of delivery from factory" in the Power Storage Wall System user manual, version 2.0, Liniotech (page 19, section 6.3, Product Warranty).
Printed as "12 years’ warranty" in the Key Features list and "factory warranty valid for 12 years from the date of delivery from factory" in the warranty section.
Liniotech's user manual (version 2.0) for the 51.2V 200AH 10.24 kWh Power Storage Wall, model LNT051200A-B-GBP2, linked from the Manuals tab of its 10 kWh Power Storage Wall page and hosted on Liniotech's store content host.
Archived copies
Archived copy of a document published by Liniotech. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Liniotech Energy's product specification (first issue dated 2022-05-11, headed "51.2V 200Ah-16S2P(IEC,CE)") linked from the 10 kWh Power Storage Wall page. Several temperature figures are printed for the bare cell.
Archived copies
Archived copy of a document published by Liniotech. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Liniotech's product page for the 10 kWh Power Storage Wall. It links the user manual and specification sheet but names no model number, and its own figures differ from both documents, so no figure is taken from it.
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
Power Storage Wall System user manual, version 2.0, Liniotech
Archived copy of a document published by Liniotech. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Specification for approval, 51.2V 200Ah-16S2P, Spec.No. LNT051200A-B-GBP2, Liniotech
Archived copy of a document published by Liniotech. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
LNT051200A-B-GBP2
Manufacturer SKU LNT051200A-B-GBP2
Observed Oct 23, 2026
UL 1973: claimed
Product / system scope unresolved. Listed on the California Energy Commission Battery List (data unchanged since October 21, 2026; downloaded October 23, 2026) as Liniotech "LNT051200A-B-GBP2": UL 1973, certifying entity Intertek, certificate date 2023-04-27, Ed. 2 : 2018, CEC listing date 2023-08-01. A state equipment list entry, not the certification body's own record.
Product / system scope unresolved. Model LNT051200A-B-GBP2 listed on the California Energy Commission Battery List (data unchanged since October 1, 2026; downloaded October 11, 2026) under Liniotech, as "LNT051200A-B-GBP2", CEC listing date 2023-08-01. This is an equipment listing, not UL certification or complete-system approval.
Battery pack claim; verification pending. A manufacturer claim of compliance with a test method, not a certification or test report. Printed as "With a 12-year warranty and compliance with global standards (UL1973, UL9540A, IEC62619)" under "Safety and Durability" in the product description of Liniotech's own LINIOTECH 10 KWH Power Wall page (liniotech.com, SKU LINIOTECH10-1), captured October 2, 2026. Liniotech's Power Storage Wall user manual (version 2.0) lists "Lithium Battery Standard IEC62619,UN38.3,ROHS,CE-EMC,MSDS", and its specification for approval (Spec.No. LNT051200A-B-GBP2) prints no UL standard; both are cited on this record. UL 9540A is a test method, not a certification; the document does not say who ran the test. No test report number is printed; no report was checked.
note: CEC listing: full credit for the certificate criterion. Exact model found in the dated CEC equipment list. This is not a safety certification or system approval. Applies: CEC; UL 9540; UL 1973.