Printed as "Frame Anodized aluminium alloy" in Seraphim's SRP-435-460-BTE-BG 435-460W bifacial datasheet (SRP-DS-EN-2026V1.0), captured on September 28, 2026. The Mechanical Specifications table's labels and values run in separate columns in the extracted text; confirmed by rendering page 2 and reading the image.
Read from the SRP-440-BTE-BG row of the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0) Electrical Characteristics table, which prints the models in the order "SRP-435-BTE-BG SRP-440-BTE-BG SRP-445-BTE-BG SRP-450-BTE-BG SRP-455-BTE-BG SRP-460-BTE-BG" and one row per model beginning with its STC power: "440 35.38 15.80 29.41 14.97 488 35.46 17.51 29.49 16.53 22.02" (STC front Pmp, Voc, Isc, Vmp, Imp, then the BNPI values at rear irradiance 135 W/m², then module efficiency). STC: irradiance 1000 W/m², module temperature 25°C, AM1.5. Captured on September 25, 2026.
Where: Electrical Characteristics table, SRP-440-BTE-BG row, STC front columns, Imp
Read from the SRP-440-BTE-BG row of the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0) Electrical Characteristics table, which prints the models in the order "SRP-435-BTE-BG SRP-440-BTE-BG SRP-445-BTE-BG SRP-450-BTE-BG SRP-455-BTE-BG SRP-460-BTE-BG" and one row per model beginning with its STC power: "440 35.38 15.80 29.41 14.97 488 35.46 17.51 29.49 16.53 22.02" (STC front Pmp, Voc, Isc, Vmp, Imp, then the BNPI values at rear irradiance 135 W/m², then module efficiency). STC: irradiance 1000 W/m², module temperature 25°C, AM1.5. Captured on September 25, 2026.
Where: Electrical Characteristics table, SRP-440-BTE-BG row, STC front columns, Isc
Read from the SRP-440-BTE-BG row of the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0) Electrical Characteristics table, which prints the models in the order "SRP-435-BTE-BG SRP-440-BTE-BG SRP-445-BTE-BG SRP-450-BTE-BG SRP-455-BTE-BG SRP-460-BTE-BG" and one row per model beginning with its STC power: "440 35.38 15.80 29.41 14.97 488 35.46 17.51 29.49 16.53 22.02" (STC front Pmp, Voc, Isc, Vmp, Imp, then the BNPI values at rear irradiance 135 W/m², then module efficiency). STC: irradiance 1000 W/m², module temperature 25°C, AM1.5. Captured on September 25, 2026.
Where: Electrical Characteristics table, SRP-440-BTE-BG row, STC front columns, Vmp
Read from the SRP-440-BTE-BG row of the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0) Electrical Characteristics table, which prints the models in the order "SRP-435-BTE-BG SRP-440-BTE-BG SRP-445-BTE-BG SRP-450-BTE-BG SRP-455-BTE-BG SRP-460-BTE-BG" and one row per model beginning with its STC power: "440 35.38 15.80 29.41 14.97 488 35.46 17.51 29.49 16.53 22.02" (STC front Pmp, Voc, Isc, Vmp, Imp, then the BNPI values at rear irradiance 135 W/m², then module efficiency). STC: irradiance 1000 W/m², module temperature 25°C, AM1.5. Captured on September 25, 2026.
Where: Electrical Characteristics table, SRP-440-BTE-BG row, STC front columns, Voc
Read from the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0) on seraphim-energy.com, which the catalog already archives; its Electrical Characteristics table prints one column per module type, SRP-435-BTE-BG to SRP-460-BTE-BG, with Front STC and Front BNPI sub-columns. Page 1 reads "435-460W High efficiency bifacial modules" and Application Conditions print "Bifaciality 80%±5%" with BNPI (rear side) figures. Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Signature Solar (signaturesolar.com), which stays listed as an additional source.
Any common grounding hardware and components such as nuts, bolts, star washers, spilt-ring lock washers, flat washers, and other compatible components can be used for grounding or equipotential bonding.; If grounding is required, the grounding wire must be properly fastened to the module frame to ensure continuity.
Printed as "Any common grounding hardware and components such as nuts, bolts, star washers, spilt-ring lock washers, flat washers, and other compatible components can be used for grounding or equipotential bonding." in section 4.8 Grounding (PDF page 20) of Seraphim's DG and BG Photovoltaic Module installation guide (Version: 2025V1.0), which refers to national standards for grounding and bonding and shows the grounding holes in Figure 9.
Printed as "External Dimension Weight ... 1762 x 1134 x 30 mm 24.9 kg" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), one value for every model, captured on September 25, 2026.
Printed as "Solar Cells ... TOPCon 182 x 105mm (96pcs)" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), one value for every model, captured on September 25, 2026.
Printed as "Front / Back Glass 2.0mm AR coating semi-tempered glass, low iron" in Seraphim's SRP-435-460-BTE-BG 435-460W bifacial datasheet (SRP-DS-EN-2026V1.0), captured on September 28, 2026. The Mechanical Specifications table's labels and values run in separate columns in the extracted text; confirmed by rendering page 2 and reading the image. The datasheet prints one combined row for both sides.
Where: Datasheet page 1, Mechanical Specifications, Front / Back Glass row
Printed as "The reference torque magnitude for M8 screw is 16~20N*M." for clamp mounting in section 4.3 (PDF page 8) of Seraphim's DG and BG Photovoltaic Module installation guide (Version: 2025V1.0). Section 4.4 (PDF page 13) repeats 16~20Nm for M8 screws in screw installation, but Table 7 on PDF page 15 prints "Recommended torque is between 12N.m to 16N.m." and "M8 screw tightening torque size range: 12-16N.M; M6 screw tightening torque size range: 8- 12N.M." for the recommended screw accessories, and section 4.5 gives 10-14 Nm for tracker bolts. The value is the clamp figure; the manual itself prints the differing screw figures. Printed unit N*M, stored as N·m.
Where: PDF page 8, section 4.3 Mounting with clamps
Printed as "Front / Back Glass 2.0mm AR coating semi-tempered glass, low iron" in Seraphim's SRP-435-460-BTE-BG 435-460W bifacial datasheet (SRP-DS-EN-2026V1.0), captured on September 28, 2026. The Mechanical Specifications table's labels and values run in separate columns in the extracted text; confirmed by rendering page 2 and reading the image. The datasheet prints one combined row for both sides.
Where: Datasheet page 1, Mechanical Specifications, Front / Back Glass row
W 1,134 × L 1,762 × T 30 mm / W 44.65 × L 69.37 × T 1.2 in converted
Printed as "External Dimension ... 1762 x 1134 x 30 mm" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), one value for every model, captured on September 25, 2026. Length x width x frame thickness.
Read from the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0) on seraphim-energy.com, which the catalog already archives; its Electrical Characteristics table prints one column per module type, SRP-435-BTE-BG to SRP-460-BTE-BG, with Front STC and Front BNPI sub-columns. The SRP-440-BTE-BG column reads, Front STC then Front BNPI then efficiency: "440 35.38 15.80 29.41 14.97 488 35.46 17.51 29.49 16.53 22.02"; Front STC Maximum Power -Pmp(W): 440. STC: irradiance 1000 W/m², module temperature 25°C, AM=1.5; power measurement tolerance +/-3%. Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Signature Solar (signaturesolar.com), which stays listed as an additional source.
Where: Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), Electrical Characteristics, SRP-440-BTE-BG column, Front STC "Maximum Power -Pmp(W)" row
Printed as "Maximum System Voltage Maximum Series Fuse Rating ... 1500V DC 30 A" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), one value for every model, captured on September 25, 2026.
Where: Application Conditions, Maximum Series Fuse Rating
4.3.1 Install module with clamps at longsides of frames; SRP-XXX-BTE-BG 1762*1134 A=(220-450)mm Downforce load≤5400Pa; Uplift load≤2400Pa; 4.3.2 Install module with clamps at short side of frames; A=(100-240)mm Downforce load≤1600Pa; Uplift load≤1600Pa; 4.4 SCREW INSTALLATION; (8 mounting holes suitable for frame with 8 mounting holes design); Downforce load≤5400Pa Uplift load≤2400Pa; (4 mounting holes suitable for frame with 4 mounting holes design); Downforce load≤2400Pa Uplift load≤2400Pa
Printed as "SRP-XXX-BTE-BG 1762*1134 A=(220-450)mm Downforce load≤5400Pa; Uplift load≤2400Pa" in Table 3, Long-side Installation Diagram and Mechanical Loads (PDF page 11) of Seraphim's DG and BG Photovoltaic Module installation guide (Version: 2025V1.0): clamps on the long sides at A=(220-450)mm, clamp length≥50 mm, downforce up to 5400Pa and uplift up to 2400Pa. Table 5 (PDF page 13), clamps on the short sides, gives A=(100-240)mm with downforce and uplift up to 1600Pa for the SRP-XXX-BTE-BG 1762*1134 row; Table 6 (PDF page 14), screw installation, gives downforce up to 5400Pa and uplift up to 2400Pa with 8 mounting holes and 2400Pa each way with 4 mounting holes (merged table cells read from rendered page 13 and 14). Section 4.3 asks for at least four clamps on the long side and at least two purlins behind the module for the 5400 Pa rating. The manual does not say whether these are test or design loads. Loads depend on the mounting method, so no single figure is recorded for this model.
Where: PDF page 10 to 14, section 4.3 Mounting with clamps (Tables 3 and 5) and 4.4 Screw installation (Table 6), SRP-XXX-BTE-BG rows
Do not bend the cables less than 43 mm (1.69 inch) radius.
Printed as "Do not bend the cables less than 43 mm (1.69 inch) radius." in section 4.7 (PDF page 19) of Seraphim's DG and BG Photovoltaic Module installation guide (Version: 2025V1.0), followed by "PV cables will be damaged if bending radius less than 43mm."
Where: PDF page 19, section 4.7 Electrical installation
Printed as "Maximum System Voltage Maximum Series Fuse Rating Operating Temperature Nominal Operating Cell Temperature Bifaciality Mechanical Load 1500V DC 30 A -40~+85 °C" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), one value for every model, captured on September 25, 2026. The datasheet does not name a UL or IEC rating for this figure.
Where: Application Conditions, Maximum System Voltage
Read from the SRP-440-BTE-BG row of the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0) Electrical Characteristics table, which prints the models in the order "SRP-435-BTE-BG SRP-440-BTE-BG SRP-445-BTE-BG SRP-450-BTE-BG SRP-455-BTE-BG SRP-460-BTE-BG" and one row per model beginning with its STC power: "440 35.38 15.80 29.41 14.97 488 35.46 17.51 29.49 16.53 22.02" (STC front Pmp, Voc, Isc, Vmp, Imp, then the BNPI values at rear irradiance 135 W/m², then module efficiency). STC: irradiance 1000 W/m², module temperature 25°C, AM1.5. Captured on September 25, 2026.
Printed as "Operating Temperature ... -40~+85 °C" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), one value for every model, captured on September 25, 2026.
Where: Application Conditions, Operating Temperature
Printed as "Pmax Temperature Coefficient Voc Temperature Coefficient Isc Temperature Coefficient -0.29 %/°C -0.25 %/°C +0.046 %/°C" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), one value for every model, captured on September 25, 2026.
Where: Temperature Ratings, Pmax Temperature Coefficient
Printed as "Pmax Temperature Coefficient Voc Temperature Coefficient Isc Temperature Coefficient -0.29 %/°C -0.25 %/°C +0.046 %/°C" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), one value for every model, captured on September 25, 2026.
Where: Temperature Ratings, Isc Temperature Coefficient
Printed as "Pmax Temperature Coefficient Voc Temperature Coefficient Isc Temperature Coefficient -0.29 %/°C -0.25 %/°C +0.046 %/°C" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), one value for every model, captured on September 25, 2026.
Where: Temperature Ratings, Voc Temperature Coefficient
One new unit at the listed price; shipping and tax are not included. The listing prints a minimum purchase of "15 units". · Store SKU 1400036Price readings (24)
Pack of 36 · One pallet of 36 panels (store SKU 1400036-36; the title prints "36 Panels") at the listed price; shipping and tax are not included. · Store SKU 1400036-36Price readings (14)
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing for this product: First-year degradation needed.
Each input is scored against the best documented value for a solar panel, and weight per watt against the best in the panel’s own format. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Certificates and unsupported claims do not add points.
Read from the SRP-440-BTE-BG row of the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0) Electrical Characteristics table, which prints the models in the order "SRP-435-BTE-BG SRP-440-BTE-BG SRP-445-BTE-BG SRP-450-BTE-BG SRP-455-BTE-BG SRP-460-BTE-BG" and one row per model beginning with its STC power: "440 35.38 15.80 29.41 14.97 488 35.46 17.51 29.49 16.53 22.02" (STC front Pmp, Voc, Isc, Vmp, Imp, then the BNPI values at rear irradiance 135 W/m², then module efficiency). STC: irradiance 1000 W/m², module temperature 25°C, AM1.5. Captured on September 25, 2026.
Printed as "Guarantee on product material and workmanship 15YEARS" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), captured on September 25, 2026. The datasheet does not print the warranty terms, exclusions or claim process.
This is the best documented for a solar panel, printed by the maker. 870 solar panels share this value.
Printed as "Linear power output warranty 30YEARS" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), captured on September 25, 2026. The datasheet prints the yearly output steps only as chart labels.
Power temperature coefficient-0.29 %/°C12.1 / 16.0
0.29 against 0.22 %/°C, the lowest documented for a solar panel (printed by the maker): Jackery SolarSaga 100 Air
Printed as "Pmax Temperature Coefficient Voc Temperature Coefficient Isc Temperature Coefficient -0.29 %/°C -0.25 %/°C +0.046 %/°C" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), one value for every model, captured on September 25, 2026.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
StandardEvidenceStatusSource
CECauthority listing reportedlisted as of snapshot[9]
Scope
equipment listing
Covered models
SRP-440-BTE-BG
Limitations
Model SRP-440-BTE-BG listed on the California Energy Commission PV Module List (data unchanged since October 1, 2026; downloaded October 11, 2026) under Seraphim Solar System Co.,Ltd., as "SRP-440-BTE-BG", CEC listing date 2026-01-02. This is an equipment listing, not UL certification or complete-system approval.
Printed as "Guarantee on product material and workmanship 15YEARS" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), captured on September 25, 2026. The datasheet does not print the warranty terms, exclusions or claim process.
Printed as "Linear power output warranty 30YEARS" in the Seraphim SRP-(435-460)-BTE-BG datasheet (2026V1.0), captured on September 25, 2026. The datasheet prints the yearly output steps only as chart labels.
Location: Cover page and section 1.1 Applicable products (Table 1)
Retrieved Oct 1, 2026
Seraphim's own installation guide for its dual glass (DG) and bifacial dual glass (BG) modules, captured 1 October 2026 from seraphim-energy.com, where Seraphim's downloads page lists it as the Bifacial module Installation Manual. Version 2025V1.0 as printed on the cover. Its table of applicable products names series such as SRP-XXX-BTE-BG by module size. It gives series-level mounting loads by method, torque, wiring and grounding instructions, not model ratings. Manufacturer instructions, not independent tests.
Archived copies
Archived copy of a document published by Seraphim. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-25.
Location: Mechanical Specifications, Application Conditions, Electrical Characteristics and Temperature Ratings tables
Retrieved Sep 24, 2026
Two-page Seraphim datasheet for the SRP-435-BTE-BG to SRP-460-BTE-BG bifacial TOPCon modules, linked as "SRP-(435-460)-BTE-BG_182-210_EN" from the www.seraphim-energy.com downloads page and archived on September 25, 2026. Electrical values are printed one row per model, so each figure is read from the named model's row; mechanical, temperature and warranty rows are printed once for the family. It is a manufacturer specification, not an independent test, and names no stock keeping units beyond the model names.
Archived copies
Archived copy of a document published by Seraphim. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by Seraphim. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by Seraphim. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
SRP-440-BTE-BG
Manufacturer SKU SRP-440-BTE-BG
Observed Oct 11, 2026
CEC: claimed
Product / system scope unresolved. Model SRP-440-BTE-BG listed on the California Energy Commission PV Module List (data unchanged since October 1, 2026; downloaded October 11, 2026) under Seraphim Solar System Co.,Ltd., as "SRP-440-BTE-BG", CEC listing date 2026-01-02. This is an equipment listing, not UL certification or complete-system approval.