Charged Reviews · Quick reference
Seraphim 440W Bifacial Solar Panel
- Brand
- Seraphim Solar
- Model
- SRP-440-BTE-BG
- SKU / part number
- SRP-440-BTE-BG Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/seraphim-solar-srp-440-bte-bg
Electrical at STC
Temperature and system limits
Cells and construction
Mechanical and connections
Installation (from the manual)
Torque
- Clamp or bolt torque
- 16 to 20 N·m [3]
Conductors
- Cable bending radius / connector notes
- Do not bend the cables less than 43 mm (1.69 inch) radius. [3]
Clearances and orientation
- Mounting methods and clamp zones
- 4.3.1 Install module with clamps at longsides of frames; SRP-XXX-BTE-BG 1762*1134 A=(220-450)mm Downforce load≤5400Pa; Uplift load≤2400Pa; 4.3.2 Install module with clamps at short side of frames; A=(100-240)mm Downforce load≤1600Pa; Uplift load≤1600Pa; 4.4 SCREW INSTALLATION; (8 mounting holes suitable for frame with 8 mounting holes design); Downforce load≤5400Pa Uplift load≤2400Pa; (4 mounting holes suitable for frame with 4 mounting holes design); Downforce load≤2400Pa Uplift load≤2400Pa [3]
Grounding
- Grounding
- Any common grounding hardware and components such as nuts, bolts, star washers, spilt-ring lock washers, flat washers, and other compatible components can be used for grounding or equipotential bonding.; If grounding is required, the grounding wire must be properly fastened to the module frame to ensure continuity. [3]