Printed as "Weight 39.2kg" in the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, in one cell spanning the HESP4880SH3, HESP48100SH3 and HESP48120SH3 columns, captured on September 25, 2026.
Where: SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, "Weight" row, HESP4880SH3 column
Printed as "Max. Output Power 16,000VA" in the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, AC Output, HESP4880SH3 column, captured on September 25, 2026. The datasheet prints no duration for this figure; it is stated in VA, not W.
Where: SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, AC Output, "Max. Output Power" row, HESP4880SH3 column
Printed as "Max. Hybrid Charging Current 180Adc" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), chapter 9, captured on September 26, 2026. Value for this model.
Printed as "HESP4880SH3 5mm²/ 10 AWG 22A 2P-25A" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), section 4.2, PV input table, captured on September 26, 2026.
700 × 440 × 260 mm / 27.6 × 17.3 × 10.2 in converted
Printed as "Dimension 700*440*260mm" in the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, in one cell spanning the HESP4880SH3, HESP48100SH3 and HESP48120SH3 columns, captured on September 25, 2026. The datasheet does not name the axes; the three figures are kept in printed order.
Where: SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, "Dimension" row, HESP4880SH3 column
Printed as "MPPT Voltage Range 200-650Vdc/200-650Vdc" in the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, Solar Input, in one cell spanning the HESP4880SH3, HESP48100SH3 and HESP48120SH3 columns, captured on September 25, 2026. The same range is printed for each MPPT input.
Where: SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, Solar Input, "MPPT Voltage Range" row, HESP4880SH3 column
Printed as "Rated Frequency 50/60Hz ± 0.3Hz" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), chapter 9, captured on September 26, 2026.
Printed as "Max. Grid Charging Current 100Adc" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), chapter 9, captured on September 26, 2026. Value for this model.
Printed as "Waveform Pure Sine Wave" in the maker's document "SRNE HESP 48V 8-12K SH3 series EU Three-phase Solar Hybrid Inverter User Manual (V1.4, 2025-07-04)".
Where: SRNE HESP 48V 8-12K SH3 series EU Three-phase Solar Hybrid Inverter User Manual (V1.4, 2025-07-04), PDF page 50, Waveform row; spec-table row
Printed as "Protection Degree IP65" in the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, in one cell spanning the HESP4880SH3, HESP48100SH3 and HESP48120SH3 columns, captured on September 25, 2026.
Where: SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, "Protection Degree" row, HESP4880SH3 column
Printed as "Max. Open Circuit Voltage 800Vdc+800Vdc" in the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, Solar Input, in one cell spanning the HESP4880SH3, HESP48100SH3 and HESP48120SH3 columns, captured on September 25, 2026. The same figure is printed for each MPPT input.
Where: SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, Solar Input, "Max. Open Circuit Voltage" row, HESP4880SH3 column
Printed as "Switch Time 10ms(typical)" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), chapter 9, captured on September 26, 2026.
Generator input; max. generator charging current 100A
Printed as "Max. Generator Charging Current 100Adc" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), chapter 9, captured on September 26, 2026. Value for this model.
Printed as "HESP4880SH3 Three-phase 23.2A 6mm²/8 AWG(L1/L2/L3/N) 4P-40A" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), section 4.2, GRID table, captured on September 26, 2026.
Printed as "Max. AC bypass current 23.2Aac" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), chapter 9, captured on September 26, 2026. Value for this model.
Printed as "Parallel Capacity 1~6 Units" in the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, in one cell spanning the HESP4880SH3, HESP48100SH3 and HESP48120SH3 columns, captured on September 25, 2026. Units that may operate in parallel, as printed.
Where: SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, "Parallel Capacity" row, HESP4880SH3 column
Printed as "HESP4880SH3 Three-phase 11.6A 5mm²/10AWG(L1/L2/L3/N) 4P-25A" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), section 4.2, LOAD table, captured on September 26, 2026.
Printed as "Rated Output Power 8000W 10000W 12000W" in SRNE HESP 48V 8-12K SH3 series EU Three-phase Solar Hybrid Inverter User Manual (V1.4, 2025-07-04), User manual, chapter 9 Datasheet (page 50), Inverter output Rated Output Power row, HESP4880SH3 column. Revised on 1 October 2026: SRNE's user manual prints this rating in watts for this model, and the kilowatt figure is a direct conversion of that printed value; the manual is the primary source.
Where: User manual, chapter 9 Datasheet (page 50), Inverter output Rated Output Power row, HESP4880SH3 column
Printed as "Battery Type Li-ion / Lead-Acid / User Defined" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), chapter 9, captured on September 26, 2026.
Printed as "Max. PV Isc 37A/37Adc" in the SRNE HESP 48V 8-12K SH3 series Three-phase Hybrid Inverter User Manual (V1.4), chapter 9, captured on September 26, 2026. Per MPPT.
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/06/25/Datasheet_SRNE_HESP Series_8-12kW SH3_EU_Three-Phase_ Solar Hybrid Inverter_V1.1.pdf, from the specification column headed HESP4880SH3. Printed value: "97.2%". Conditions as stated on that sheet. No value was taken from another model or from a name.
80.08 L* (Calculated from published dimensions)700 × 440 × 260 mm / 27.6 × 17.3 × 10.2 inWeight39.2 kg / 86.4 lb
Evidence score
6/100Missing details30% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Certificate evidence needed; Battery conversion efficiency needed; Idle consumption needed.
Each input is scored against the best documented value for an inverter: warranty term and battery conversion efficiency against every published inverter, idle consumption (lower is better) against the inverters in the same output band, or against every published inverter when the output is not documented. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Researched products receive a score. Certificates earn points for the evidence itself. Size and weight do not affect scores.
Warranty term5 years6.0 / 30.0
5 of 25 years, the best documented for an inverter (printed by the maker): APsystems DS3
Printed as "Warranty 5 years" in the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, in one cell spanning the HESP4880SH3, HESP48100SH3 and HESP48120SH3 columns, captured on September 25, 2026.
Research pending, 0 points: Certificates, Battery conversion efficiency, Idle consumption.
Warranty term and battery conversion efficiency are compared with every published inverter; idle consumption with the inverters in the same 7 to 15 kW output band. · Method version 0.5
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
StandardEvidenceStatusSource
EN61000-6-1manufacturer claimpresent at observation[1]
Scope
equipment listing
Covered models
HESP4880SH3
Limitations
Listed in the "Certificate" row of the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, captured on September 25, 2026. Printed as "EN61000-6-1" in the line "Certificate IEC62109-1, IEC62109-2, EN61000-6-1, EN61000-6-3, FCC 15 class B, RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
EN61000-6-3manufacturer claimpresent at observation[1]
Scope
equipment listing
Covered models
HESP4880SH3
Limitations
Listed in the "Certificate" row of the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, captured on September 25, 2026. Printed as "EN61000-6-3" in the line "Certificate IEC62109-1, IEC62109-2, EN61000-6-1, EN61000-6-3, FCC 15 class B, RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
FCC 15 class Bmanufacturer claimpresent at observation[1]
Scope
equipment listing
Covered models
HESP4880SH3
Limitations
Listed in the "Certificate" row of the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, captured on September 25, 2026. Printed as "FCC 15 class B" in the line "Certificate IEC62109-1, IEC62109-2, EN61000-6-1, EN61000-6-3, FCC 15 class B, RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
SRNE prints "IEC 62109" in a certification, standards or compliance row on PDF page 2 of https://www.srnesolar.com/userfiles/files/2025/06/25/Datasheet_SRNE_HESP Series_8-12kW SH3_EU_Three-Phase_ Solar Hybrid Inverter_V1.1.pdf, a document this catalog already attaches to HESP4880SH3; the value was located through the specification column headed HESP4880SH3. This is a manufacturer statement only: no issuer listing, certificate number, edition, scope or validity was checked, and the printed row may cover further models in the same family.
Printed as "Warranty 5 years" in the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, in one cell spanning the HESP4880SH3, HESP48100SH3 and HESP48120SH3 columns, captured on September 25, 2026.
Where: SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, General Data, "Warranty" row, HESP4880SH3 column
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-26.
Location: Cable and circuit breaker requirements; datasheet chapter
Retrieved Sep 25, 2026
SRNE's own user manual (HESP 48V 8-12K SH3 series EU Three-phase Solar Hybrid Inverter User Manual (V1.4, 2025-07-04)), listed on srnesolar.com Download, captured on September 26, 2026. Its cable and circuit breaker tables and its datasheet chapter print values by model.
Archived copies
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
SRNE prints "IEC 62109" in a certification, standards or compliance row on PDF page 2 of https://www.srnesolar.com/userfiles/files/2025/06/25/Datasheet_SRNE_HESP Series_8-12kW SH3_EU_Three-Phase_ Solar Hybrid Inverter_V1.1.pdf, a document this catalog already attaches to HESP4880SH3; the value was located through the specification column headed HESP4880SH3. This is a manufacturer statement only: no issuer listing, certificate number, edition, scope or validity was checked, and the printed row may cover further models in the same family.
EN61000-6-1Manufacturer claim · equipment listingClaimedListed when checked
Listed in the "Certificate" row of the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, captured on September 25, 2026. Printed as "EN61000-6-1" in the line "Certificate IEC62109-1, IEC62109-2, EN61000-6-1, EN61000-6-3, FCC 15 class B, RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
EN61000-6-3Manufacturer claim · equipment listingClaimedListed when checked
Listed in the "Certificate" row of the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, captured on September 25, 2026. Printed as "EN61000-6-3" in the line "Certificate IEC62109-1, IEC62109-2, EN61000-6-1, EN61000-6-3, FCC 15 class B, RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
FCC 15 class BManufacturer claim · equipment listingClaimedListed when checked
Listed in the "Certificate" row of the SRNE HESP 8-12kW SH3 EU three-phase solar hybrid inverter datasheet V1.1, captured on September 25, 2026. Printed as "FCC 15 class B" in the line "Certificate IEC62109-1, IEC62109-2, EN61000-6-1, EN61000-6-3, FCC 15 class B, RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
SRNE datasheet
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
SRNE HESP 48V 8-12K SH3 series EU Three-phase Solar Hybrid Inverter User Manual (V1.4, 2025-07-04)
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
HESP4880SH3
Observed Sep 19, 2026
IEC 62109: claimed
Product / system scope unresolved. SRNE prints "IEC 62109" in a certification, standards or compliance row on PDF page 2 of https://www.srnesolar.com/userfiles/files/2025/06/25/Datasheet_SRNE_HESP Series_8-12kW SH3_EU_Three-Phase_ Solar Hybrid Inverter_V1.1.pdf, a document this catalog already attaches to HESP4880SH3; the value was located through the specification column headed HESP4880SH3. This is a manufacturer statement only: no issuer listing, certificate number, edition, scope or validity was checked, and the printed row may cover further models in the same family.