Printed as "Frame Anodized aluminum alloy" in Mission Solar Energy's MSE305TS60 datasheet (Mission Solar PERC 60 305-310 W datasheet (TS60)), captured on September 28, 2026.
Read from Mission Solar Energy's published document at https://www.missionsolar.com/wp-content/uploads/2025/05/PERC-60-305-310-1.pdf, from the column headed MSE305TS60. Printed value: "9.38". Standard test conditions as stated on that sheet. No value was taken from another model or from a name.
Read from Mission Solar Energy's published document at https://www.missionsolar.com/wp-content/uploads/2025/05/PERC-60-305-310-1.pdf, from the column headed MSE305TS60. Printed value: "9.90". Standard test conditions as stated on that sheet. No value was taken from another model or from a name.
Where: PDF page 2, "Short-Circuit Current Isc A" row
Read from Mission Solar Energy's published document at https://www.missionsolar.com/wp-content/uploads/2025/05/PERC-60-305-310-1.pdf, from the column headed MSE305TS60. Printed value: "32.80". Standard test conditions as stated on that sheet. No value was taken from another model or from a name.
Read from Mission Solar Energy's published document at https://www.missionsolar.com/wp-content/uploads/2025/05/PERC-60-305-310-1.pdf, from the column headed MSE305TS60. Printed value: "40.10". Standard test conditions as stated on that sheet. No value was taken from another model or from a name.
Where: PDF page 2, "Open-Circuit Voltage Voc V" row
Read from the publisher's own document for this exact model (Page 2, mechanical data, Solar Cells). The publisher prints no further test condition for this row; no value was taken from another model.
The modules can be connected at the holes provided in the flange.; The lug must be a tin-coated copper lug, silver in color. Do NOT use a bare copper lug, which is brown.; Lay-In lug: Burndy CL501TN QIKLUG; Bolt: #10-32, SS, tightening torque 25 in-Ibf (2.9 Nm); Serrated washer: #10, SS; Nut: #10-32, SS (components available as CL501DBKIT)
Printed as "The modules can be connected at the holes provided in the flange." in Mission Solar Energy's User Instructions for MSExxxTS60 (P-SA2-UM-0008, [4.0 FRAME] 10/2019), section Grounding in the US and Canada, followed by the table of recommended components (item, maker and part, tightening torque) quoted here row by row; "in-Ibf" is as printed. The manual also accepts any grounding method and components listed according to NEC requirements.
Where: PDF page 2, Grounding in the US and Canada, table of recommended components
Read from the publisher's own document for this exact model (Page 2, mechanical data, Weight). The publisher prints no further test condition for this row; no value was taken from another model.
Read from the publisher's own document for this exact model (Page 2, module description). The publisher prints no further test condition for this row; no value was taken from another model.
Read from the publisher's own document for this exact model (Page 2, mechanical data, Connector). The publisher prints no further test condition for this row; no value was taken from another model.
Printed as "Front Glass 3.2mm (0.126in.) tempered, low-iron, anti-reflective coating" in Mission Solar Energy's MSE305TS60 datasheet (Mission Solar PERC 60 305-310 W datasheet (TS60)), captured on September 28, 2026.
Where: Datasheet page 2, MECHANICAL DATA, Front Glass row
Read from the publisher's own document for this exact model (Page 2, mechanical data, J-Box). The publisher prints no further test condition for this row; no value was taken from another model.
Printed as "Front Glass 3.2mm (0.126in.) tempered, low-iron, anti-reflective coating Frame Anodized aluminum alloy" in Mission Solar PERC 60 305-310 W datasheet (TS60), Page 2, mechanical data, Front Glass and Frame rows. Revised on 1 October 2026: The data sheet prints a glass module in an anodized aluminum frame for this model, which is a rigid framed panel; the record should quote that printed construction.
Where: Page 2, mechanical data, Front Glass and Frame rows
W 1,001 × H 1,675 × D 33 mm / W 39.41 × H 65.94 × D 1.3 in converted
Read from the publisher's own document for this exact model (Page 2, mechanical data, module dimension). The publisher prints no further test condition for this row; no value was taken from another model.
Read from the publisher's own document for this exact model (Page 2, operating conditions, Maximum Series Fuse Rating). The publisher prints no further test condition for this row; no value was taken from another model.
Where: Page 2, operating conditions, Maximum Series Fuse Rating
Standard mounting with rails, Fig. A: a = 239 mm (9.4 in), b = 419 mm (16.5 in); Fmin = - 3.1 kN/m² (- 64 psf), Fmax = + 5.4 kN/m² (+ 113 psf); Standard mounting with rails, Fig. B: a = 223 mm (8.78 in), b = 840.5 mm (33.1 in); Fmin = - 3.1 kN/m² (- 64 psf), Fmax = + 8.5 kN/m² (+ 178 psf); Standard mounting with rails, Fig. C: a = 150 mm (5.91 in), b = 250 mm (9.84 in); Fmin = - 2.0 kN/m² (- 41 psf), Fmax = + 8.5 kN/m² (+ 178 psf); Standard mounting with rails, Fig. D: a = 510 mm (20.1 in), b = 223 mm (8.8 in); Fmin = - 3.0 kN/m² (- 62 psf), Fmax = + 5.4 kN/m² (+ 113 psf); Standard mounting without rails, Fig. E: a = 239 mm (9.4 in), b = 419 mm (16.5 in), Fmin = - 3.1 kN/m² (- 64 psf), Fmax = + 3.1 kN/m² (+ 64 psf); c = 10 mm (0.4 in), d = 239 mm (9.4 in), Fmin = - 1.6 kN/m² (- 33 psf), Fmax = + 1.6 kN/m² (+ 33 psf); Standard mounting without rails, Fig. F: a = 150 mm (5.91 in), b = 250 mm (9.84 in), Fmin = - 2.0 kN/m² (- 41 psf), Fmax = + 2.0 kN/m² (+ 41 psf); c = 150 mm (5.91 in), d = 10 mm (0.4 in), Fmin = - 1.6 kN/m² (- 33 psf), Fmax = + 1.6 kN/m² (+ 33 psf); Only for rail-less sloped roof systems, Fig. G: a = 10 mm (0.4 in), b = 80 mm (3.1 in); Fmin = - 2.5 kN/m² (- 52 psf), Fmax = + 2.5 kN/m² (+ 52 psf); Only for slide-in systems: Fig. H Fmin = - 1.6 kN/m² (- 33 psf), Fmax = + 1.6 kN/m² (+ 33 psf); Figs. I and J Fmin = - 2.8 kN/m² (- 58 psf), Fmax = + 2.8 kN/m² (+ 58 psf); The modules must be securely fixed at a minimum of 4 locations on the substructure. Fixing is only allowed in designated areas.
Printed as "b = 840.5 mm (33.1 in) Fmax = + 8.5 kN/m² (+ 178 psf)" in Mission Solar Energy's User Instructions for MSExxxTS60 (P-SA2-UM-0008, [4.0 FRAME] 10/2019), mounting figures on PDF page 3: clamp positions a, b, c, d measured as printed, with the minimum (Fmin) and maximum (Fmax) loads printed under each figure. Which figure each pair of values belongs to was read from rendered page 3, since the text layer interleaves the figure captions; the hyphenation of "substructure" in the PDF's Mounting paragraph is removed here. The manual adds that for bottom mounting 8 to 9 mm (1/4 or 5/16 in) bolts under 25 mm (1 in) long are used and that torque is set by the system engineer.
Where: PDF page 3, mounting figures A to J; PDF page 2, Mounting
Read from the publisher's own document for this exact model (Page 2, operating conditions, Maximum System Voltage). The publisher prints no further test condition for this row; no value was taken from another model.
Where: Page 2, operating conditions, Maximum System Voltage
Read from Mission Solar Energy's published document at https://www.missionsolar.com/wp-content/uploads/2025/05/PERC-60-305-310-1.pdf, from the column headed MSE305TS60. Printed value: "18.2". Standard test conditions as stated on that sheet. No value was taken from another model or from a name.
Read from the publisher's own document for this exact model (Page 2, operating conditions, Operating Temperature Range). The publisher prints no further test condition for this row; no value was taken from another model.
Where: Page 2, operating conditions, Operating Temperature Range
Read from the publisher's own document for this exact model (Page 2, temperature coefficients, Pmax). The publisher prints no further test condition for this row; no value was taken from another model.
Read from the publisher's own document for this exact model (Page 2, temperature coefficients, Isc). The publisher prints no further test condition for this row; no value was taken from another model.
Read from the publisher's own document for this exact model (Page 2, temperature coefficients, Voc). The publisher prints no further test condition for this row; no value was taken from another model.
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing for this product: First-year degradation needed.
Each input is scored against the best documented value for a solar panel, and weight per watt against the best in the panel’s own format. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Certificates and unsupported claims do not add points.
Read from Mission Solar Energy's published document at https://www.missionsolar.com/wp-content/uploads/2025/05/PERC-60-305-310-1.pdf, from the column headed MSE305TS60. Printed value: "18.2". Standard test conditions as stated on that sheet. No value was taken from another model or from a name.
MSE limited warranty: 25-year product cover applies to modules manufactured on or after 1 August 2019 (12 years before that date); 25-year limited power warranty.
MSE limited warranty: 25-year product cover applies to modules manufactured on or after 1 August 2019 (12 years before that date); 25-year limited power warranty.
0.38 against 0.22 %/°C, the lowest documented for a solar panel (printed by the maker): Jackery SolarSaga 100 Air
Read from the publisher's own document for this exact model (Page 2, temperature coefficients, Pmax). The publisher prints no further test condition for this row; no value was taken from another model.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
StandardEvidenceStatusSource
CECauthority listing reportedlisted as of snapshot[5]
Scope
equipment listing
Covered models
MSE305TS60
Limitations
Model MSE305TS60 listed on the California Energy Commission PV Module List (data unchanged since October 1, 2026; downloaded October 11, 2026) under Mission Solar Energy LLC, as "MSE305TS60", CEC listing date 2020-01-13. This is an equipment listing, not UL certification or complete-system approval.
MSE limited warranty: 25-year product cover applies to modules manufactured on or after 1 August 2019 (12 years before that date); 25-year limited power warranty.
MSE limited warranty: 25-year product cover applies to modules manufactured on or after 1 August 2019 (12 years before that date); 25-year limited power warranty.
Location: Cover page (MSExxxTS60) and PDF page 4 (revision history)
Retrieved Oct 1, 2026
Mission Solar Energy's own installation instructions for its MSExxxTS60 modules, captured 1 October 2026 from missionsolar.com, where the MSExxxTS60 product page links it as the Installation Manual; printed as [4.0 FRAME] 10/2019 with revision 1 dated 2019.10.31. Its cover names MSExxxTS60. It gives series-level safety, mounting (figures with clamp positions and loads), electrical connection and grounding instructions and refers to the datasheet for electrical ratings; it does not establish model ratings. Manufacturer instructions, not independent tests.
Archived copies
Archived copy of a document published by Mission Solar Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Manufacturer datasheet for the MSExxxTS60 family; it names 305 W and 310 W columns only.
Archived copies
Archived copy of a document published by Mission Solar Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Limited product and power warranty terms for the MSE module line; durations depend on module manufacturing date and it publishes no electrical specifications.
Archived copies
Archived copy of a document published by Mission Solar Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
Mission Solar Energy reference document
Archived copy of a document published by Mission Solar Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by Mission Solar Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Mission Solar Energy User Instructions for MSExxxTS60 (P-SA2-UM-0008, [4.0 FRAME] 10/2019, revision 1)
Archived copy of a document published by Mission Solar Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
MSE305TS60
Observed Oct 11, 2026
CEC: claimed
Product / system scope unresolved. Model MSE305TS60 listed on the California Energy Commission PV Module List (data unchanged since October 1, 2026; downloaded October 11, 2026) under Mission Solar Energy LLC, as "MSE305TS60", CEC listing date 2020-01-13. This is an equipment listing, not UL certification or complete-system approval.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.