Charged Reviews · Quick reference
Mission Solar Energy MSE305TS60
- Brand
- Mission Solar Energy
- Model
- MSE305TS60
- SKU / part number
- ?
- Category
- Solar panels
chargedreviews.com/panels/mission-solar-energy-mse305ts60
Electrical at STC
Temperature and system limits
Cells and construction
Mechanical and connections
Installation (from the manual)
Clearances and orientation
- Mounting methods and clamp zones
- Standard mounting with rails, Fig. A: a = 239 mm (9.4 in), b = 419 mm (16.5 in); Fmin = - 3.1 kN/m² (- 64 psf), Fmax = + 5.4 kN/m² (+ 113 psf); Standard mounting with rails, Fig. B: a = 223 mm (8.78 in), b = 840.5 mm (33.1 in); Fmin = - 3.1 kN/m² (- 64 psf), Fmax = + 8.5 kN/m² (+ 178 psf); Standard mounting with rails, Fig. C: a = 150 mm (5.91 in), b = 250 mm (9.84 in); Fmin = - 2.0 kN/m² (- 41 psf), Fmax = + 8.5 kN/m² (+ 178 psf); Standard mounting with rails, Fig. D: a = 510 mm (20.1 in), b = 223 mm (8.8 in); Fmin = - 3.0 kN/m² (- 62 psf), Fmax = + 5.4 kN/m² (+ 113 psf); Standard mounting without rails, Fig. E: a = 239 mm (9.4 in), b = 419 mm (16.5 in), Fmin = - 3.1 kN/m² (- 64 psf), Fmax = + 3.1 kN/m² (+ 64 psf); c = 10 mm (0.4 in), d = 239 mm (9.4 in), Fmin = - 1.6 kN/m² (- 33 psf), Fmax = + 1.6 kN/m² (+ 33 psf); Standard mounting without rails, Fig. F: a = 150 mm (5.91 in), b = 250 mm (9.84 in), Fmin = - 2.0 kN/m² (- 41 psf), Fmax = + 2.0 kN/m² (+ 41 psf); c = 150 mm (5.91 in), d = 10 mm (0.4 in), Fmin = - 1.6 kN/m² (- 33 psf), Fmax = + 1.6 kN/m² (+ 33 psf); Only for rail-less sloped roof systems, Fig. G: a = 10 mm (0.4 in), b = 80 mm (3.1 in); Fmin = - 2.5 kN/m² (- 52 psf), Fmax = + 2.5 kN/m² (+ 52 psf); Only for slide-in systems: Fig. H Fmin = - 1.6 kN/m² (- 33 psf), Fmax = + 1.6 kN/m² (+ 33 psf); Figs. I and J Fmin = - 2.8 kN/m² (- 58 psf), Fmax = + 2.8 kN/m² (+ 58 psf); The modules must be securely fixed at a minimum of 4 locations on the substructure. Fixing is only allowed in designated areas. [3]
Grounding
- Grounding
- The modules can be connected at the holes provided in the flange.; The lug must be a tin-coated copper lug, silver in color. Do NOT use a bare copper lug, which is brown.; Lay-In lug: Burndy CL501TN QIKLUG; Bolt: #10-32, SS, tightening torque 25 in-Ibf (2.9 Nm); Serrated washer: #10, SS; Nut: #10-32, SS (components available as CL501DBKIT) [3]
Not in the manual: Torque, Conductors