Printed as "Cell Type N-Type Monocristalline (M10)" in Indepwr iPWR-M10-54BX2S-440W datasheet (V10, July 2026), Datasheet, Mechanical Properties, Cell Type. Revised on 1 October 2026: The manufacturer datasheet prints the cell type as "N-Type Monocristalline (M10)", including the wafer size and its own spelling.
Where: Datasheet, Mechanical Properties, Cell Type
There are grounding holes with a diameter of 4mm on the long side of the back frame of the module, by the edge part.; These holes can only be used for grounding with bolts, so cannot be used for module installation.; This method includes bolt, flat washer, start washer, washer and nut (see Figure 13).; grounding wires shall be made of copper core wires with a size of AWG 6-12 (4-14 mm²) and 90°C
Printed as "There are grounding holes with a diameter of 4mm on the long side of the back frame of the module, by the edge part." in section 3.4.3 Grounding (PDF page 22) of INDEPWR Solar's Installation Manual (V7_Ref_300326, published as the June 2026 manual). PDF page 23 asks for stainless steel bolts, nuts and washers sized to the hole and copper grounding wire of AWG 6-12 (4-14 mm²) rated 90°C, and allows other grounding methods that meet the electrical codes.
Where: PDF page 22 and 23, section 3.4.3 Grounding
0.126 (3.2mm) thickness, AR coating, High-transmittance-Tempered Glass
Printed as "Glass (in) 0.126 (3.2mm) thickness, AR coating, High-transmittance-Tempered Glass" in INDEPWR Solar's iPWR-M10-54BX2S-440W_V10 (July 2026) datasheet, captured on September 28, 2026. The sheet prints no Back Glass or Backsheet row for this single-glass model, so rear_surface stays unknown.
Printed as "Torque (lb-ft) 11.8-14.75 (16-20 Nm) (M8 Bolt)" in Table 4, INDEPWR Module Clamp Description (PDF page 15) of INDEPWR Solar's Installation Manual (V7_Ref_300326, published as the June 2026 manual); first printed in lb-ft, stored as ft-lb, with 16-20 Nm printed beside it. The same table asks for clamps at least 1.96 in (50mm) long and 0.11 in (3mm) thick with a frame overlap of 0.39-0.43 in (10-11mm). The manual says to confirm the exact torque with the installer or bracket supplier.
Where: PDF page 15, section 3.3.2 Installation with clamps, Table 4
W 1,134 × L 1,722 × D 35 mm / W 44.65 × L 67.8 × D 1.4 in converted
Printed as "iPWR-M10-54BX2S-440W 67.7x44.6x1.3 (1722x1134x35mm)" in the module type table on PDF page 2 of INDEPWR Solar's Installation Manual (V7_Ref_300326, published as the June 2026 manual), Size (in) column: 1722 or 2278 mm long, 1134 mm wide, 35 mm thick as printed in the parentheses. Re-cited on 1 October 2026 to the manufacturer's own document; previously cited to INDEPWR Solar (static1.squarespace.com), which stays listed as an additional source.
Where: PDF page 2, Module Type table, row iPWR-M10-54BX2S-440W
Printed as "iPWR-M10- 54BX2S-440W +5400 -5400 +7200 -7200 +2400Pa -2400Pa" in Table 6, INDEPWR Module Mechanical Load Capacity (Clamping Method), of INDEPWR Solar's Installation Manual (V7_Ref_300326, published as the June 2026 manual). Table 3 (PDF page 14) gives bolting Method A (inner mounting holes) and Method B (outer mounting holes) a maximum test load of +2400 -2400 Pa each for this model, with mounting rails parallel to the short side. Table 6 (PDF page 17) prints for this model: Method C +5400 -5400 Pa with X1 13 to 16.94 in and X2 50.84 to 54.78 in, Method D +7200 -7200 Pa with X1 11.30 to 15.23 in, X2 31.5 to 35.43 in and X3 52.56 to 56.50 in, and Method E +2400Pa -2400Pa with Y1 9.05 to 13.38 in and Y2 31.26 to 35.6 in (columns read from rendered page 17). All loads are maximum test loads; the manual states Maximum Test Load = 1.5 (Safety factor) x Design Load. Loads depend on the method, so no single design load is recorded.
Where: PDF page 14 to 17, section 3.3.1 Installation with bolts (Table 3) and 3.3.2 Installation with clamps (Table 6)
When wiring modules, always keep in mind the minimum bend radius (see Figure 11).; For our DC cables this parameter is 4.
Printed as "For our DC cables this parameter is 4." in section 3.4.2 (PDF page 21) of INDEPWR Solar's Installation Manual (V7_Ref_300326, published as the June 2026 manual): the manual defines the minimum bend radius as the cable outer diameter multiplied by a cable multiplier, which it gives as 4 for its DC cables. No radius in millimeters is printed.
Printed as "Three split junction boxes (see in Figure 12) with IP68 installed in INDEPWR modules" in section 3.4.2 (PDF page 21) of INDEPWR Solar's Installation Manual (V7_Ref_300326, published as the June 2026 manual).
Printed as "Comprehensive Certificates UL / CEC / FSEC IEC61215:2021 / IEC61730:2023" in the INDEPWR Solar iPWR-M10-54BX2S-440W spec sheet (Rev.23JUN2026_V10), captured on September 25, 2026. "UL / CEC / FSEC" is printed as a list of marks and listings with no standard number, file number or issuer record; the IEC standards on the same line are recorded as certification claims.
One new unit at the listed price; shipping and tax are not included. The listing prints a minimum purchase of "10 units". · Store SKU 1400081Price readings (17)
One pallet of 31 panels (store SKU 1400081-31; the title prints "31 Panels") at the listed price; shipping and tax are not included. · Store SKU 1400081-31Price readings (14)
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing for this product: First-year degradation needed.
Each input is scored against the best documented value for a solar panel, and weight per watt against the best in the panel’s own format. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Certificates and unsupported claims do not add points.
This is the best documented for a solar panel, printed by the maker. 87 solar panels share this value.
Printed as "iPWR-M10-54BX2S-440W: All Black 108-cell Bifacial N-type M10 108-cell Single-Glass Bifacial Module 67.79 x 44.64 x 1.37 inch (1722 x 1134 x 35 mm) 5400Pa Wind Load 0.40% Annual Degradation 30-year Product & 30-year Peak Power Warranty" on INDEPWR Solar's Solar Products page (indepwrsolar.com/products), captured on September 25, 2026. Headline figures only; the terms are in INDEPWR's Standard Limited Warranty.
This is the best documented for a solar panel, printed by the maker. 870 solar panels share this value.
Printed as "iPWR-M10-54BX2S-440W: All Black 108-cell Bifacial N-type M10 108-cell Single-Glass Bifacial Module 67.79 x 44.64 x 1.37 inch (1722 x 1134 x 35 mm) 5400Pa Wind Load 0.40% Annual Degradation 30-year Product & 30-year Peak Power Warranty" on INDEPWR Solar's Solar Products page (indepwrsolar.com/products), captured on September 25, 2026. Headline figures only; the terms are in INDEPWR's Standard Limited Warranty.
INDEPWR Solar's own INDEPWR Solar iPWR-M10-54BX2S-440W spec sheet (Rev.23JUN2026_V10) prints "Fire Performance (UL1703) Type 1" and "Maximum Load Capacity (Per UL 1703) (Pa)" in its Test Operating Conditions (a fire performance type and a load rating) for the family that includes iPWR-M10-54BX2S-440W. Recorded as the manufacturer prints it, captured on September 25, 2026; no issuer directory, file number or certificate was read in this pass, so the claim is not issuer-verified.
Manufacturer document claim for the named equipment. Issuer listing, exact revision and current status have not been independently checked. This is not a complete installed-system approval.
Manufacturer document claim for the named equipment. Issuer listing, exact revision and current status have not been independently checked. This is not a complete installed-system approval.
Printed as "iPWR-M10-54BX2S-440W: All Black 108-cell Bifacial N-type M10 108-cell Single-Glass Bifacial Module 67.79 x 44.64 x 1.37 inch (1722 x 1134 x 35 mm) 5400Pa Wind Load 0.40% Annual Degradation 30-year Product & 30-year Peak Power Warranty" on INDEPWR Solar's Solar Products page (indepwrsolar.com/products), captured on September 25, 2026. Headline figures only; the terms are in INDEPWR's Standard Limited Warranty.
Printed as "iPWR-M10-54BX2S-440W: All Black 108-cell Bifacial N-type M10 108-cell Single-Glass Bifacial Module 67.79 x 44.64 x 1.37 inch (1722 x 1134 x 35 mm) 5400Pa Wind Load 0.40% Annual Degradation 30-year Product & 30-year Peak Power Warranty" on INDEPWR Solar's Solar Products page (indepwrsolar.com/products), captured on September 25, 2026. Headline figures only; the terms are in INDEPWR's Standard Limited Warranty.
Where: iPWR-M10-54BX2S-440W entry, annual degradation line
Printed as "iPWR-M10-54BX2S-440W: All Black 108-cell Bifacial N-type M10 108-cell Single-Glass Bifacial Module 67.79 x 44.64 x 1.37 inch (1722 x 1134 x 35 mm) 5400Pa Wind Load 0.40% Annual Degradation 30-year Product & 30-year Peak Power Warranty" on INDEPWR Solar's Solar Products page (indepwrsolar.com/products), captured on September 25, 2026. Headline figures only; the terms are in INDEPWR's Standard Limited Warranty.
Location: Cover page and module type table on PDF page 2
Retrieved Oct 1, 2026
INDEPWR Solar Corp's own installation manual for its PV modules, captured 1 October 2026 from indepwrsolar.com, where INDEPWR's resources page links it. The first page prints V7_Ref_300326 and the file name says June 2026. Its module type table names iPWR-M10-54BX2S-440W, iPWR-M10-60BX2S-490W, iPWR-M10-54MX2S-440W, iPWR-M10-60MX2S-490W, iPWR-M10-72BX2D-550W and iPWR-M10-72BX2D-590W. It gives mounting test loads by method, clamp, wiring and grounding instructions, not electrical ratings. Manufacturer instructions, not independent tests.
Archived copies
Archived copy of a document published by INDEPWR Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Manufacturer document claim for the named equipment. Issuer listing, exact revision and current status have not been independently checked. This is not a complete installed-system approval.
Manufacturer document claim for the named equipment. Issuer listing, exact revision and current status have not been independently checked. This is not a complete installed-system approval.
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-25.
Location: Key Features and Temperature Coefficients / Cell Type
Retrieved Sep 25, 2026
Manufacturer datasheet linked from the Products page of indepwrsolar.com (file name marks version V10, July 2026). It names iPWR-M10-54BX2S-440W.
Archived copies
Archived copy of a document published by Indepwr Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-25.
Location: Residential and Commercial and Industrial product lists
Retrieved Sep 24, 2026
INDEPWR Solar's own Solar Products page on indepwrsolar.com, captured on September 25, 2026. It lists each module model with a one-line summary of construction, dimensions, wind load, annual degradation and warranty years, and links each spec sheet. Warranty lines are headline figures; the terms are in INDEPWR's Standard Limited Warranty, not read in this pass. Some construction words on this page differ from the spec sheets (for example "Single-Glass" for iPWR-M10-60BX2D-490W, whose spec sheet prints "Double Glass").
Archived copy of a document published by INDEPWR Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
INDEPWR Solar Installation Manual (English, V7_Ref_300326, June 2026 file)
Archived copy of a document published by INDEPWR Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
iPWR-M10-54BX2S-440W
Manufacturer SKU iPWR-M10-54BX2S-440W
Observed Sep 8, 2026
IEC 61215: claimed
Product / system scope unresolved. Manufacturer document claim for the named equipment. Issuer listing, exact revision and current status have not been independently checked. This is not a complete installed-system approval.
Product / system scope unresolved. Manufacturer document claim for the named equipment. Issuer listing, exact revision and current status have not been independently checked. This is not a complete installed-system approval.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.