SunGoldPower's own product data, captured 2026-10-27, prints SKU "SPH302460A" for option "SPH302460A [PV30-108V / MPPT30-90V] / Only Inverter" (variant 44390140870793) of listing "3000W 24V Solar Inverter Charger".
Printed as "The ground wire is connected to the grounding screw hole on the cabinet through the O-type terminal." (PDF page 11) and, for setting item 63 "N-PE bonding automatic switching function", "DIS default Disable automatic switching of N-PE connections." (PDF page 25) in the SPH302460A "Solar charger inverter" user manual (no revision printed).
Printed as "Peak power 6000VA" in the single-model table (Models SPH302460A) of the SPH302460A "Solar charger inverter" user manual (no revision printed). No duration is printed with it; the overload lines give shutdown after 10 seconds between 110% and 125% load and after 5 seconds above 125%. Revised on 1 October 2026: The manual prints the peak power as "6000VA"; the recorded text "6,000 VA" is the same figure in a different form, so the fact now carries the printed form.
6,000 VA
Printed as "Peak power 6000VA" in the SPH302460A user manual. No duration is printed with it; the overload lines give shutdown after 10 s above 110% and 5 s above 125% load. Captured on September 25, 2026.
Printed as "Peak power 6000VA" in the single-model table (Models SPH302460A) of the SPH302460A "Solar charger inverter" user manual (no revision printed). No duration is printed with it; the overload lines give shutdown after 10 seconds between 110% and 125% load and after 5 seconds above 125%. Revised on 1 October 2026: The manual prints the peak power as "6000VA"; the recorded text "6,000 VA" is the same figure in a different form, so the fact now carries the printed form.
6,000 VA
Printed as "Peak power 6000VA" in the SPH302460A user manual. No duration is printed with it; the overload lines give shutdown after 10 s above 110% and 5 s above 125% load. Captured on September 25, 2026.
Printed as "The solar storage inverter is off-grid." in the safety instructions of the SPH302460A "Solar charger inverter" user manual (no revision printed), followed by "it is forbidden to use it in parallel with other input AC power".
Printed as "Idle Power: 50W" in the Inverter Mode list, which the page prints once for both SPH302480A and SPH302460A (the PV charging lists are split by model; this list is not). The same list prints "Power Saver Mode Idle Consumption: 25W".
Printed as "Battery type Lead acid or lithium battery" in the SPH302460A "Solar charger inverter" user manual (no revision printed). Setting item 33 lists the lithium battery BMS protocols the RS485 port can use (PDF page 24): "SGP=SUNGOLDPOWER" and others.
Printed as "SPH302460A 8mm2 /8AWG 40A 2P—63A" in the PV input wiring table (columns: recommended PV wiring diameter, maximum PV input current, recommended breaker) of the SPH302460A "Solar charger inverter" user manual (no revision printed); 40A is the maximum PV input current.
Printed as "The ground wire is connected to the grounding screw hole on the cabinet through the O-type terminal." (PDF page 11) and, for setting item 63 "N-PE bonding automatic switching function", "DIS default Disable automatic switching of N-PE connections." (PDF page 25) in the SPH302460A "Solar charger inverter" user manual (no revision printed).
Printed as "SPH302460A 8mm2 /8AWG 40A 2P—63A" in the PV input wiring table of the SPH302460A "Solar charger inverter" user manual (no revision printed). A reference size only.
Read from rendered page 10: the installation diagram labels 200mm on all four sides of the unit. The step text above it is printed as "space of at least 200m to the left and right air outlets" (the text says "200m"; the diagram labels say "200mm"). From the SPH302460A "Solar charger inverter" user manual (no revision printed).
Printed as "SPH302460A 8mm2 /8AWG 40A 2P—63A" in the PV input table of the SPH302460A "Solar charger inverter" user manual (no revision printed); the recommended air switch or circuit breaker type is printed as "2P—63A".
Location: PDF page 9, section 2.2 Wiring specifications and circuit breaker selection, PV input table, Recommended air switch or circuit breaker type column, SPH302460A row
Printed as "SPH302460A 8mm2 /8AWG 40A 2P—63A" in the recommended AC input table of the SPH302460A "Solar charger inverter" user manual (no revision printed); the breaker type is printed as "2P—63A".
Location: PDF page 9, section 2.2 Wiring specifications and circuit breaker selection, AC input table, Recommended air switch or circuit breaker type column, SPH302460A row
Printed as "cross-sectional area is not less than 4mm2" in the SPH302460A "Solar charger inverter" user manual (no revision printed), which also says the grounding wire shall be as thick and as short as possible.
Printed as "SPH302460A 8mm2 /8AWG 25A 40A 2P—63A" in the recommended AC output table of the SPH302460A "Solar charger inverter" user manual (no revision printed); the breaker type is printed as "2P—63A".
Location: PDF page 9, section 2.2 Wiring specifications and circuit breaker selection, AC output table, Recommended air switch or circuit breaker type column, SPH302460A row
Printed as "SPH302460A 30mm2 /2AWG 140A 100A 2P—160A" in the recommended battery wiring table of the SPH302460A "Solar charger inverter" user manual (no revision printed) (the cell breaks the line after "30mm2"). The same row prints a rated battery discharge current of 140A and a maximum charge current of 100A. A reference size only: the manual says a thicker wire reduces voltage drop over long runs.
Printed as "Mains or generator: Connected at the AC input, to power the load while charging the battery." (PDF page 5) and "This dry node can control the ON/OFF of the diesel generator to charge the battery." (PDF page 27) in the SPH302460A "Solar charger inverter" user manual (no revision printed).
Printed as "SPH302460A 8mm2 /8AWG 40A 2P—63A" in the recommended AC input wiring table of the SPH302460A "Solar charger inverter" user manual (no revision printed) (maximum bypass input current 40A). A reference size only.
Printed as "SPH302460A 30mm2 /2AWG 140A 100A 2P—160A" in the recommended battery table of the SPH302460A "Solar charger inverter" user manual (no revision printed); the breaker type is printed as "2P—160A". The wiring warnings (PDF pages 12 and 13) say "a circuit breaker must be installed at the battery terminal".
Location: PDF page 9, section 2.2 Wiring specifications and circuit breaker selection, battery table, Recommended air switch or circuit breaker type column, SPH302460A row
Printed as "SPH302460A 8mm2 /8AWG 25A 40A 2P—63A" in the recommended AC output wiring table of the SPH302460A "Solar charger inverter" user manual (no revision printed) (rated inverter AC output current 25A, maximum bypass output current 40A). A reference size only.
Printed as "③ USB communication port ⑪ PV port ④ RS485/WIFI communication port ⑫ Setup button ⑤ Dry contact port" in the appearance legend of the SPH302460A "Solar charger inverter" user manual (no revision printed). Section 5.2 (PDF page 27) says the RS485 port also takes the optional RS485 to WiFi/GPRS module.
Published claims and calculations, not independent test results.
Documents
2 on file
PDF
3KW 24V Solar Inverter Charger SPH302480A User ManualOfficialSunGoldPowerOfficial instruction manual
Source details
Revision
Not stated
Revision date
Not stated
SunGoldPower publishes this instruction manual for SPH302460A, among other models named on the same document. Read from https://sungoldpower.com/collections/power-inverter on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Location: Document title as published
Retrieved
SunGoldPower publishes this instruction manual for SPH302460A, among other models named on the same document. Read from https://sungoldpower.com/collections/power-inverter on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Archived copy of a document published by SunGoldPower. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.
Location: Product heading; Highlight list; Specification and User Manual tabs (manual-download-button links)
Retrieved
SunGoldPower's own product page, captured byte for byte on September 23, 2026. It establishes what SunGoldPower published for SPH302480A, SPH302460A on that date: the page heading, the Highlight text, the variant selector (SKUs SPH302480A, SPH302480A+2*LFP24-100A, SPH302460A, SPH302460A+2*LFP24-100A) and the 3 document link(s) under its User Manual tab. Prices and stock on the page are the state of a promotional storefront and are not recorded from it. A specification quoted from the page is SunGoldPower's own published figure, not a test result.
CE(IEC 62109-1、2)Manufacturer claim · equipment listingClaimedListed when checked
SunGoldPower's own statement, recorded exactly as printed: "Certification CE(IEC 62109-1、2) EMC certification level EN61000, C2" (SPH302460A_User_Manual.pdf). A manufacturer statement names no certificate number or issuer and is not evidence of a listing; certificate documents SunGoldPower serves are recorded separately.
EN61000, C2Manufacturer claim · equipment listingClaimedListed when checked
SunGoldPower's own statement, recorded exactly as printed: "Certification CE(IEC 62109-1、2) EMC certification level EN61000, C2" (SPH302460A_User_Manual.pdf). A manufacturer statement names no certificate number or issuer and is not evidence of a listing; certificate documents SunGoldPower serves are recorded separately.
Linked from https://sungoldpower.com/products/3000w-24v-solar-inverter-charger with link text "none".
Location: SPH302460A_User_Manual.pdf
Retrieved
Original manufacturer-hosted PDF preserved byte for byte, linked from the manufacturer's own product page for SKU SPH302480A. The revision is whatever was published at this URL on the access date; no later revision was checked and no separate variant coverage is claimed beyond the page that linked it.
Archived copy of a document published by SunGoldPower. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.
Archived copy of a document published by SunGoldPower. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.
Archived copy of a document published by SunGoldPower. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.
3KW 24V Solar Inverter Charger SPH302480A User Manual
Archived copy of a document published by SunGoldPower. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Warranty term needed; Battery conversion efficiency needed.
Each input is scored against the best documented value for an inverter: warranty term and battery conversion efficiency against every published inverter, idle consumption (lower is better) against the inverters in the same output band, or against every published inverter when the output is not documented. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Researched products receive a score. Certificates earn points for the evidence itself. Size and weight do not affect scores.
50 against 8 W, the lowest documented for an inverter in the 1.5 to 3.5 kW output band (printed by the maker): Victron Energy Inverter 12/2000 Smart
Printed as "Idle Power: 50W" in the Inverter Mode list, which the page prints once for both SPH302480A and SPH302460A (the PV charging lists are split by model; this list is not). The same list prints "Power Saver Mode Idle Consumption: 25W".
Research pending, 0 points: Warranty term, Battery conversion efficiency.
Warranty term and battery conversion efficiency are compared with every published inverter; idle consumption with the inverters in the same 1.5 to 3.5 kW output band. · Method version 0.5
UL 1741:2021 Ed.3+R:19May2023Product / system scope unresolvedClaimedListed when checked
Intertek certificate of compliance for report 2510B1700SHA-001, issued January 16, 2026, model SPH302460A only. The same product page sells SPH302480A, which this certificate does not name. The standard is recorded exactly as the certificate prints it. Read from the issuer's certificate document as SunGoldPower serves it on the product page's User Manual tab, captured September 23, 2026; the certificate's current status was not re-checked in the issuer's online directory. Recorded as a manufacturer-hosted certificate: the document was read as SunGoldPower serves it, and the issuer check remains open.
CSA C22.2#107.1:2016 Ed.4+U1Product / system scope unresolvedClaimedListed when checked
Intertek certificate of compliance for report 2510B1700SHA-001, issued January 16, 2026, model SPH302460A only. The same product page sells SPH302480A, which this certificate does not name. The standard is recorded exactly as the certificate prints it. Read from the issuer's certificate document as SunGoldPower serves it on the product page's User Manual tab, captured September 23, 2026; the certificate's current status was not re-checked in the issuer's online directory. Recorded as a manufacturer-hosted certificate: the document was read as SunGoldPower serves it, and the issuer check remains open.
CE(IEC 62109-1、2)Product / system scope unresolvedClaimedListed when checked
SunGoldPower's own statement, recorded exactly as printed: "Certification CE(IEC 62109-1、2) EMC certification level EN61000, C2" (SPH302460A_User_Manual.pdf). A manufacturer statement names no certificate number or issuer and is not evidence of a listing; certificate documents SunGoldPower serves are recorded separately.
EN61000, C2Product / system scope unresolvedClaimedListed when checked
SunGoldPower's own statement, recorded exactly as printed: "Certification CE(IEC 62109-1、2) EMC certification level EN61000, C2" (SPH302460A_User_Manual.pdf). A manufacturer statement names no certificate number or issuer and is not evidence of a listing; certificate documents SunGoldPower serves are recorded separately.
CE(IEC 62109-1、2)Manufacturer claim · equipment listingClaimedListed when checked
SunGoldPower's own statement, recorded exactly as printed: "Certification CE(IEC 62109-1、2) EMC certification level EN61000, C2" (SPH302460A_User_Manual.pdf). A manufacturer statement names no certificate number or issuer and is not evidence of a listing; certificate documents SunGoldPower serves are recorded separately.
EN61000, C2Manufacturer claim · equipment listingClaimedListed when checked
SunGoldPower's own statement, recorded exactly as printed: "Certification CE(IEC 62109-1、2) EMC certification level EN61000, C2" (SPH302460A_User_Manual.pdf). A manufacturer statement names no certificate number or issuer and is not evidence of a listing; certificate documents SunGoldPower serves are recorded separately.
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
SPH302460A
Manufacturer SKU SPH302460A
Observed
UL 1741:2021 Ed.3+R:19May2023: claimed
Product / system scope unresolved. Intertek certificate of compliance for report 2510B1700SHA-001, issued January 16, 2026, model SPH302460A only. The same product page sells SPH302480A, which this certificate does not name. The standard is recorded exactly as the certificate prints it. Read from the issuer's certificate document as SunGoldPower serves it on the product page's User Manual tab, captured September 23, 2026; the certificate's current status was not re-checked in the issuer's online directory. Recorded as a manufacturer-hosted certificate: the document was read as SunGoldPower serves it, and the issuer check remains open.
Product / system scope unresolved. Intertek certificate of compliance for report 2510B1700SHA-001, issued January 16, 2026, model SPH302460A only. The same product page sells SPH302480A, which this certificate does not name. The standard is recorded exactly as the certificate prints it. Read from the issuer's certificate document as SunGoldPower serves it on the product page's User Manual tab, captured September 23, 2026; the certificate's current status was not re-checked in the issuer's online directory. Recorded as a manufacturer-hosted certificate: the document was read as SunGoldPower serves it, and the issuer check remains open.