Manufacturer claim; issuer verification pending. Applies to the exact inverter.
Photo sources
Manufacturer and seller images. Configuration examples may include additional equipment.
Image source: Schneider Electric SW 4048 120/240 (865-4048-21), manufacturer product imageInverter charger
Schneider Electric Conext SW 4048 120/240 Split-phase (865-4048-21)
Key specs
Converted: 3800 W / 1000 W per kW = 3.8 kW
All specifications
Identity
SKU detail
No spec by that name.
| Field | Value | Conditions | Source |
|---|---|---|---|
| Weight | 30.5 kg / 67.2 lb converted Check note | The datasheet prints a lower weight. Schneider Electric's datasheet (DS20220511_SW_NA) prints "Product weight" as "28.1 kg (62.0 lb)" for the SW 4048 120/240. The owner's guide 975-0638-01-03 and installation guide print 67.2 lbs. (30.5 kg), which is recorded. Printed as "67.2 lbs. (30.5 kg)" unit net weight. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026).Where: Physical Specifications, Unit Net Weight row | [1] |
| Peak output | 4400 W for 30 min; 7000 W for 5 s | Printed as 4400 W for 30 minutes (only when NoLoadVD is enabled) and 7000 W for 5 seconds, at 25 °C. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Inverter Specifications, Continuous output power (AC) and Surge power rating rows | [1] |
| Service end | April 4, 2035 | Printed as "To be end-of-service on: Apr 4, 2035"; the page defines end of standard service as the last date Schneider Electric can provide maintenance services such as repair and spare parts. Not a warranty term. Where: Product page commercial status block | [4] |
| AC voltage | 120/240 VAC | Printed as nominal voltage "120/240 VAC" single-phase/split-phase; the operating voltage range is 104/208 VAC to 127/254 VAC. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Inverter Specifications, Nominal voltage single-phase/split-phase row | [1] |
| Max charge | 45 A | Printed as "45 A" maximum charger output current. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Charger Specifications, Maximum output current row; datasheet charger Output current row | [1] [3] |
| Dimensions | W 343 × H 197 × L 387 mm / W 13.5 × H 7.76 × L 15.2 in converted Check note | The datasheet prints different dimensions. Schneider Electric's datasheet (DS20220511_SW_NA) prints "Product dimensions (H x W x D)" as "41.8 x 34.1 x 19.7 cm (16.5 x 13.4 x 7.6 in)". The owner's guide 975-0638-01-03 and installation guide print 387×343×197 mm (L × W × H), which is recorded. Printed as "15.2×13.5×7.6 in (387×343×197 mm)" (L × W × H); the millimeter figures are recorded. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026).Where: Physical Specifications, L × W × H row | [1] |
| Efficiency | 94 % | Peak inverter efficiency, printed as "94%". Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Inverter Specifications, Peak efficiency row | [1] [3] |
| Product status | Discontinued | Schneider Electric's se.com page for 865-4048-21 prints "Discontinued on: Jul 26, 2025" and says the part "has not been replaced". Reseller stock and continued service are separate. Where: Product page commercial status block | [4] |
| AC frequency | 50 or 60 Hz (selectable); 60 Hz default | Printed as operating frequency range "selectable 50 or 60 Hz" and default output frequency "60 Hz". Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Inverter Specifications, Operating frequency range and Default output frequency rows | [1] |
| AC configuration | Split-phase (L1/L2) | Printed as AC OUTPUT connection "Split-phase (L1/L2)". Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Inverter Specifications, AC OUTPUT connection row | [1] |
| Enclosure rating | Indoor only, IP 20 | Printed as ingress protection rating "Indoor only, IP 20" for all models; manufacturer claim. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Environmental Specifications, Ingress protection rating row (all models) | [1] |
| Transfer time | < 20 ms | Printed as "< 20 ms" in the Transfer time (utility to inverter) row for all models. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: AC Transfer Specifications, Transfer time row (all models) | [1] |
| Nominal voltage | 48 V DC | Printed as "48 VDC" nominal output voltage. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Charger Specifications, Nominal output voltage row | [1] |
| Surge AC output | 7,000 W | Printed as "7000 W" surge power rating for 5 seconds. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Inverter Specifications, Surge power rating (5 seconds) row | [1] [3] |
| Grid passthrough | 30 A | Printed as relay current rating "30 A" for all models, with the footnote "Limited by SCP to 24 A due to CEC/NEC regulatory requirements." Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: AC Transfer Specifications, Relay current rating row (all models) | [1] |
| Idle consumption | 27 W | Printed as "27 W" no-load power draw with the inverter on. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Specifications, No-load power draw (Inverter On) row | [1] |
| Continuous output | 3.8 kWConverted: 3800 W / 1000 W per kW = 3.8 kW | Printed as "3800 W" maximum continuous output (footnote: only when NoLoadVD is enabled) and 4400 W for 30 minutes, at 25 °C. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Specifications chapter, Inverter Specifications, Continuous output power (AC), SW 4048 120/240 column SourcesConverted: 3800 W / 1000 W per kW = 3.8 kW | [1] [3] |
| Continuous AC output | 15.2 A | Printed as "15.2 A" maximum continuous output current; the inverter peak output current is 41 A. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Inverter Specifications, Maximum continuous output current row | [1] |
| Battery voltage range | 40 to 64 V Check note | The datasheet prints a wider range. Schneider Electric's datasheet (DS20220511_SW_NA) prints "Input DC voltage range" as "40 - 68 Vdc" for the SW 4048 120/240. The owner's guide 975-0638-01-03 and installation guide print 40–64 VDC, which is recorded. Printed as "40–64 VDC" DC input voltage range; the maximum continuous power voltage range is 46–48 VDC. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026).Where: Inverter Specifications, DC Input, Voltage range row | [1] |
| Operating temperature | -20 to 60 °C / -4 to 140 °F converted | Printed as "–4 to 140 °F (–20 to 60 °C)", starting to derate above 77 °F (25 °C). Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026). Where: Environmental Specifications, Operating temperature range row (all models) | [1] |
Owner reviews
Write a reviewSellers
No listed sellers in this data.
Price history
No seller price history.
Quick reference sheet
- Continuous output
- 3.8 kW
- Battery voltage
- 40 to 64 V
- Solar input
- Not statedMPPT trackers Not stated
- AC output
- Split-phase (L1/L2)
- Warranty
- Not stated
- Size
- 26.15 L* (Calculated from published dimensions)W: 343 × H: 197 × L: 387 mm / W: 13.5 × H: 7.76 × L: 15.2 inWeight 30.5 kg / 67.2 lb
Evidence score
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Warranty term needed; Battery conversion efficiency needed.
Each input is scored against the best documented value for an inverter: warranty term and battery conversion efficiency against every published inverter, idle consumption (lower is better) against the inverters in the same output band, or against every published inverter when the output is not documented. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Researched products receive a score. Certificates earn points for the evidence itself. Size and weight do not affect scores.
27 against 1 W, the lowest documented for an inverter in the 3.5 to 7 kW output band (printed by the maker): Fronius Primo 3.8-1 208-240. The bar is a printed bound: less than 1 W, as printed.
Printed as "27 W" no-load power draw with the inverter on. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-03, which names the Conext SW 4048 120/240 as part number 865-4048-21. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as Schneider Electric's own document prints it (PM, October 17, 2026).
Research pending, 0 points: Warranty term, Battery conversion efficiency.
Warranty term and battery conversion efficiency are compared with every published inverter; idle consumption with the inverters in the same 3.5 to 7 kW output band. · Method version 0.5
How it worksCertificates
CSA C22.2 No. 107.1-01manufacturer claimpresent at observation[1]
- Scope
- equipment listing
- Covered models
- 865-4048-21
- Limitations
- Printed in the Regulatory section of Schneider Electric's own owner's guide 975-0638-01-03 for all models it covers; no certificate number or issuer file number is given, so this is a manufacturer claim and not issuer-verified. Read on October 4, 2026.
- Record detail
- Issued: Not statedValid from: Not statedExpiry: Not statedNot checked
- Source
- [1]
UL 1741manufacturer claimpresent at observation[1]
- Scope
- equipment listing
- Covered models
- 865-4048-21
- Limitations
- Printed in the Regulatory section of Schneider Electric's own owner's guide 975-0638-01-03 for all models it covers; no certificate number or issuer file number is given, so this is a manufacturer claim and not issuer-verified. Read on October 4, 2026.
- Record detail
- Issued: Not statedValid from: Not statedExpiry: Not statedNot checked
- Source
- [1]
Warranty
Unknown: no warranty facts recorded.
Recalls / legal notices
No recalls on file. All notices · Report a notice
This register is incomplete. A missing notice does not establish that a product has no recalls.
Documents
Manuals
- Schneider Electric's own Conext SW Inverter/Charger installation guide for the 120/240 V models, document 975-0639-01-03 (May 2020), Internet Archive copy of solar.schneider-electric.com captured January 20, 2022.Open
Source details
Archived copy captured on 2026-10-04.
Location: Cover, Specifications chapter
Retrieved Oct 3, 2026
An Internet Archive copy, not a live file: the live copy on solar.se.com answered HTTP 403 to the research agent on October 4, 2026. Its cover names the Conext SW 4048 120/240 (865-4048-21); its Specifications chapter prints the same SW 4048 120/240 figures as the owner's guide of the same date.
Archived copies
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived backupRevision not recorded · 12.30 MBArchived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://web.archive.org/web/20220120060605id_/https://solar.schneider-electric.com/wp-content/uploads/2020/10/ML202005_SW-NA_Installation-Guide975-0639-01-03_Rev-3_ENG.pdf. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: a44a50f5ab2b90d81122581f5e92bccf8adb80ef618945919d49dc98a3d7fee3
Datasheets
- Schneider Electric's own SW inverter/charger datasheet, Technical Specifications - North America (DS20220511_SW_NA), linked as the product datasheet from Schneider Electric's se.com page for 865-4048-21.Open
Source details
Archived copy captured on 2026-10-04.
Location: Page 2, Technical Specifications - North America
Retrieved Oct 3, 2026
Datasheet for the SW 4024 120/240 and SW 4048 120/240, part numbers 865-4024-21 and 865-4048-21. Used beside the owner's guide; where the two differ, the owner's guide is recorded and the datasheet figure is named in a warning.
Archived copies
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived backupRevision not recorded · 1.10 MBArchived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://download.schneider-electric.com/files?p_enDocType=Catalog&p_File_Name=SW-UL-Datasheet.pdf&p_Doc_Ref=SW-UL_Datasheet. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: 4c6d2d36d78fa363ed8a94cc559f5553c80573db47e9a416a44cbee7b3cba54b
Other documents
- Schneider Electric's own Conext SW Inverter/Charger owner's guide for the 120/240 V models, document 975-0638-01-03 (May 2020), linked as the user guide from Schneider Electric's se.com page for 865-4048-21.Open
Source details
Archived copy captured on 2026-10-04.
Location: Cover, Specifications chapter (pages 6-2 to 6-6)
Retrieved Oct 3, 2026
Primary source for the Conext SW 4048 120/240 Split-phase (865-4048-21): its cover and scope name the exact part number, and its Specifications chapter carries an SW 4048 120/240 column.
Archived copies
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived backupRevision not recorded · 4.68 MBArchived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=9_SW-NA_Owners-Guide_975-0638-01-03_Rev-3_ENG.pdf&p_Doc_Ref=SW-NA_OG_975-0638-01-03. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: d037c80b45b56ad2c12a9bb77ef3211d967e141e62abfaa90ca9934628769932
Archive and older revisions
Archive and older revisions1
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
- Schneider Electric's own se.com product page for the SW 4048 3.8 kW Solar Hybrid Inverter 120/240 Vac / 48 Vdc (865-4048-21), captured October 4, 2026.Open
Source details
Archived copy captured on 2026-10-04.
Location: Product heading and commercial status block
Retrieved Oct 3, 2026
Used for the commercial status (discontinued on July 26, 2025), the planned end of service (April 4, 2035), the linked documents and the product image. No specification figure is cited to this page.
Archived documents
Schneider Electric's own Conext SW Inverter/Charger owner's guide for the 120/240 V models, document 975-0638-01-03 (May 2020), linked as the user guide from Schneider Electric's se.com page for 865-4048-21.
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=9_SW-NA_Owners-Guide_975-0638-01-03_Rev-3_ENG.pdf&p_Doc_Ref=SW-NA_OG_975-0638-01-03. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: d037c80b45b56ad2c12a9bb77ef3211d967e141e62abfaa90ca9934628769932
Schneider Electric's own Conext SW Inverter/Charger installation guide for the 120/240 V models, document 975-0639-01-03 (May 2020), Internet Archive copy of solar.schneider-electric.com captured January 20, 2022.
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://web.archive.org/web/20220120060605id_/https://solar.schneider-electric.com/wp-content/uploads/2020/10/ML202005_SW-NA_Installation-Guide975-0639-01-03_Rev-3_ENG.pdf. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: a44a50f5ab2b90d81122581f5e92bccf8adb80ef618945919d49dc98a3d7fee3
Schneider Electric's own SW inverter/charger datasheet, Technical Specifications - North America (DS20220511_SW_NA), linked as the product datasheet from Schneider Electric's se.com page for 865-4048-21.
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://download.schneider-electric.com/files?p_enDocType=Catalog&p_File_Name=SW-UL-Datasheet.pdf&p_Doc_Ref=SW-UL_Datasheet. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: 4c6d2d36d78fa363ed8a94cc559f5553c80573db47e9a416a44cbee7b3cba54b
Parts and accessories
No sourced accessories or replacement parts listed yet.
Model history
Model identity
- Model
- Conext SW 4048 120/240
Manufacturer SKU 865-4048-21
No historical observations recorded yet.
Other recorded fields
| Field | Value | Conditions | Source |
|---|---|---|---|
| Evidence breakdown | method version: inverters-0.5-personal documented pct: 55 basis: Unknown missing: Warranty term needed Battery conversion efficiency needed criteria: key: certificates label: Certificates value: 22.75 unit: Unknown shown: UL 1741 +1 shown detail: Claimed state: claimed points: 10.2 ceiling: 45 weight: 45 share: 22.8 covered: yes missing: no folded: no reason: Unknown reason text: Unknown note: Manufacturer claim; issuer verification pending. Applies to the exact inverter. display note: Unknown Sources: [1] key: warranty label: Warranty term value: Unknown unit: Unknown shown: Research pending shown detail: Unknown state: pending points: 0 ceiling: 30 weight: 30 share: Unknown covered: no missing: yes folded: yes reason: undocumented reason text: Not documented. Undisclosed data scores 0. note: Not documented. display note: Unknown Sources: No source on record key: efficiency label: Battery conversion efficiency value: Unknown unit: Unknown shown: Research pending shown detail: Unknown state: pending points: 0 ceiling: 15 weight: 15 share: Unknown covered: no missing: yes folded: yes reason: undocumented reason text: Not documented. Undisclosed data scores 0. note: Not documented. display note: Unknown Sources: No source on record key: idle label: Idle consumption value: 27 unit: Unknown shown: 27 W shown detail: Unknown state: documented points: 0.4 ceiling: 10 weight: 10 share: 3.7 covered: yes missing: no folded: no reason: Unknown reason text: Unknown note: display note: Unknown Sources: [1] | ||
Community discussions
No discussions linked yet. Search DIY Solar Forum
Sources
- Schneider Electric's own Conext SW Inverter/Charger owner's guide for the 120/240 V models, document 975-0638-01-03 (May 2020), linked as the user guide from Schneider Electric's se.com page for 865-4048-21. (Schneider Electric · manufacturer · observed Oct 3, 2026)
- Schneider Electric's own Conext SW Inverter/Charger installation guide for the 120/240 V models, document 975-0639-01-03 (May 2020), Internet Archive copy of solar.schneider-electric.com captured January 20, 2022. (Schneider Electric · manufacturer · observed Oct 3, 2026)
- Schneider Electric's own SW inverter/charger datasheet, Technical Specifications - North America (DS20220511_SW_NA), linked as the product datasheet from Schneider Electric's se.com page for 865-4048-21. (Schneider Electric · manufacturer · observed Oct 3, 2026)
- Schneider Electric's own se.com product page for the SW 4048 3.8 kW Solar Hybrid Inverter 120/240 Vac / 48 Vdc (865-4048-21), captured October 4, 2026. (Schneider Electric · manufacturer · observed Oct 3, 2026)
Sign in to report an error on this page
Similar products
All with a priceVictron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX
Victron MultiPlus-II 48/5000 120V
Victron Quattro 48/5000 120V
BLUETTI RV5 Power Hub
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
* Missing details