Charged ReviewsSaved 0Compare 0Login
Victron Energy SmartSolar MPPT 250/60-MC4
Victron Energy
Charge controller

Victron Energy SmartSolar MPPT 250/60-MC4

Key specs

Charge current60 A
Weight3 kg / 6.6 lb converted
Max PV voltage250
Max conversion efficiency99 %

All specifications

Identity

BrandVictron Energy · Website
ModelSmartSolar MPPT 250/60-MC4
MarketUS
Manufacturer SKUSCC125060321
SKU detail
locator: Embedded product data, skus[].sku / skus[].name
conditions: Printed in Victron Energy's own current product page's embedded product data as "sku":"SCC125060321","name":"SmartSolar MPPT 250/60-MC4", captured September 28, 2026. This build could not confirm the part number against that page's visible rendered text, since Victron's page publishes it only inside an embedded data script; Victron's own installation manual for this voltage class does not print a part number for this model in its Dimension Drawing captions (that section only names 150-series models).
Sources: [1]
FieldValueConditionsSource
ListingEN/IEC 62109-1, UL 1741, CSA C22.2
Printed as "Safety EN/IEC 62109-1, UL 1741, CSA C22.2" in the STANDARDS rows of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026), one entry for every column of the table. Manufacturer claim as printed.
Where: PDF page 72, 9 Technical specifications, STANDARDS, Safety row
[2]
GroundingThe solar charger can be installed in a positive or in a negative grounded system.; Apply a single ground connection, preferably close to the battery, to prevent system issues or ground loops.; The positive and negative of the PV array should not be grounded.; This charge controller must be used with an external GFDI device as required by the Article 690 of the USA National Electrical Code for the installation location.
Printed as "The solar charger can be installed in a positive or in a negative grounded system." in section 4.4 of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026), which also prints the other quoted sentences on PV array grounding and ground fault detection. The connection overview names a ground screw.
Where: PDF page 17, 4.4 Grounding
[2]
Weight3 kg / 6.6 lb converted
Printed as "Weight 3 kg" in Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026), read for this model's column. Re-cited on 1 October 2026 to the manufacturer's own document; previously cited to Victron Energy (victronenergy.com), which stays listed as an additional source.
Where: PDF page 72, 9 Technical specifications, Weight row
[2] [3]
ClearancesMinimum clearance of 10cm under and above the solar charger
Printed as "Observe a minimum clearance of 10cm under and above the solar charger for optimal cooling." in section 4.1 of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026).
Where: PDF page 15, 4.1 Mounting
[2]
DimensionsW 250 × H 215 × D 95 mm / W 9.84 × H 8.46 × D 3.7 in converted
Printed as "MC4 models: 215 x 250 x 95 mm" in Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026); the recorded text is the Tr or MC4 entry for this model's column. Re-cited on 1 October 2026 to the manufacturer's own document; previously cited to Victron Energy (victronenergy.com), which stays listed as an additional source. The document labels the row "Dimensions (h x w x d)" and prints "215 x 250 x 95 mm" for this model. Revised on 13 October 2026: stored as text before; converted to numbers using the axis order the document prints (height x width x depth).
Where: PDF page 72, 9 Technical specifications, Dimensions (h x w x d) row
[2] [3]
PV disconnectProvide a means to disconnect all current-carrying conductors of a photo-voltaic power source from all other conductors in a building or other structure.
Printed as "Provide a means to disconnect all current-carrying conductors of a photo-voltaic power source from all other conductors in a building or other structure." in section 4.3 of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026). No rating for the disconnect is printed.
Where: PDF page 16, 4.3 PV array
[2]
CommunicationsVE.Direct or Bluetooth
Printed as "Data communication port VE.Direct or Bluetooth", applying to both rated currents, captured September 28, 2026.
Where: Specifications table, Data communication port row
[3]
Controller typeMPPT
Printed as "MPPT solar charger manual" on the cover of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026). Re-cited on 1 October 2026 to the manufacturer's own document; previously cited to Victron Energy (victronenergy.com), which stays listed as an additional source.
Where: PDF page 1, cover title
[2] [3]
Charge current60 A
Printed as "MPPT 250/60 250V 60A 12, 24, 36 and 48V" in the section 2.1 table (PDF page 8) of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026), and in this model's column of the Maximum battery current row of chapter 9. Re-cited on 1 October 2026 to the manufacturer's own document; previously cited to Victron Energy (victronenergy.com), which stays listed as an additional source.
Where: PDF page 8, 2.1 table of solar chargers covered, this model's row; PDF page 72, 9 Technical specifications, Maximum battery current row
[2] [3]
Enclosure ratingIP43 (electronic components), IP22 (connection area)
Printed as "Protection category IP43 (electronic components), IP22 (connection area)", applying to both rated currents, captured September 28, 2026.
Where: Specifications table, Protection category row
[3]
Max PV voltage250
Printed as "250V absolute maximum coldest conditions 245V start-up and operating maximum" in Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026); the 245 V start-up and operating maximum is printed beside it. Re-cited on 1 October 2026 to the manufacturer's own document; previously cited to Victron Energy (victronenergy.com), which stays listed as an additional source.
Where: PDF page 72, 9 Technical specifications, Maximum PV open circuit voltage row
[2] [3]
Battery voltage12/24/48 V Auto Select (software tool needed to select 36 V)
Printed as "Battery voltage 12 / 24 / 48 V Auto Select (software tool needed to select 36 V)", applying to both rated currents, captured September 28, 2026.
Where: Specifications table, Battery voltage row
[3]
Battery wire size35 mm² / AWG2
Printed as "Battery terminals 35 mm² / AWG2" in the ENCLOSURE rows of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026), one entry for every column; this is the battery terminal size. Section 1.2 (PDF page 6) asks for flexible multi-stranded copper cable.
Where: PDF page 72, 9 Technical specifications, ENCLOSURE, Battery terminals row
[2]
Battery protectionBattery fuse: minimum 70A, maximum 80A
Printed as "The battery supply must be protected by a fuse as per the below table." in section 4.2 of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026), with the row "MPPT 150/60 and 250/60 70A 80A" under the columns "Minimum battery fuse rating" and "Maximum battery fuse rating". The manual adds "For Canada the battery fuse must comply with the C22.2 standards."
Where: PDF page 15, 4.2 Battery, fuse table, MPPT 150/60 and 250/60 row
[2]
Max PV input power860 W (12 V) / 1720 W (24 V) / 2580 W (36 V) / 3440 W (48 V)
Printed as this model's own Nominal PV power figures at each supported battery voltage, captured September 28, 2026.
Where: Specifications table, Nominal PV power rows
[3]
Communication portsVE.Direct socket
Printed as "D VE.Direct socket." in the connection overview of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026). The same list also names relay screw terminals and remote on/off terminals; Bluetooth is built in.
Where: PDF page 17, 4.5 Connection overview, ID Description list
[2]
Self consumption maLess than 35 mA @ 12 V / 20 mA @ 48 V
Printed as "Self-consumption Less than 35 mA @ 12 V / 20 mA @ 48 V", applying to both rated currents, captured September 28, 2026.
Where: Specifications table, Self-consumption row
[3]
Supported chemistryGel long life (OPzV), Gel Exide A600 (OPzV), Gel MK, Gel Victron deep discharge, Gel Exide A200, AGM Victron deep discharge, Stationary tubular plate (OPzS), AGM spiral cell, Rolls AGM, PzS tubular plate traction batteries or OPzS batteries, Lithium Iron Phosphate (LiFePo4) batteries
Printed as "Lithium Iron Phosphate (LiFePo4) batteries" (rotary switch position 7) in Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026), section 5.1.2; the other names are the suggested battery types printed for positions 0 to 6 of the same table, which applies to every model the manual covers. Listed in the table's order; the app also allows a user defined algorithm.
Where: PDF pages 21 and 22, 5.1.2 Settings via the rotary switch, Suggested battery type column
[2]
Max PV input power12: 860, 24: 1,720, 36: 2,580, 48: 3,440 W
Printed in the "Nominal PV power" rows of Victron Energy's SmartSolar MPPT 250/60 and 250/70 datasheet, this model's column: 860 W at 12 V / 1720 W at 24 V / 2580 W at 36 V / 3440 W at 48 V. Footnote 1a) of the same table: "If more PV power is connected, the controller will limit input power." The controller limits its input to this figure, so it is the maximum PV input power the controller uses. Manufacturer claim, captured September 28, 2026.
Where: Specifications table, Nominal PV power rows, this model's column
[3]
Mounting orientationVertically on a non-flammable substrate, with the electrical terminals facing downwards
Printed as "Mount the solar charger vertically on a non-flammable substrate, with the electrical terminals facing downwards." in section 4.1 of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026). The same section adds "Mount the solar charger within 3 meters from the battery, but never directly above the battery."
Where: PDF page 15, 4.1 Mounting
[2]
Battery terminal torque2.4 N·m
Printed as "IMPORTANT: Torque the battery and PV connections at 2.4Nm." in section 4.6 of Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026). Printed unit spelling "Nm". This is an MC4 model, whose PV terminals are MC4 connectors (section 2.2), so the figure is recorded for the battery terminals only.
Where: PDF page 18, 4.6 Electrical connections, IMPORTANT note
[2]
Operating temperature-30 to +60 °C (full rated output up to 40 °C)
Printed as "Operating temperature -30 to +60 °C (full rated output up to 40 °C)", applying to both rated currents, captured September 28, 2026.
Where: Specifications table, Operating temperature row
[3]
Max conversion efficiency99 %
Printed as "Peak efficiency 99%" in Victron Energy's MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026), one entry for every column of the table. Re-cited on 1 October 2026 to the manufacturer's own document; previously cited to Victron Energy (victronenergy.com), which stays listed as an additional source.
Where: PDF page 72, 9 Technical specifications, Peak efficiency row
[2] [3]

Owner reviews

No owner reviews yet
Write a review

Sellers

No listed sellers in this data.

Price history

No seller price history.

Quick reference sheet

Controller type
MPPT
Maximum PV voltage (Voc)
250
Rated charge current
60 A
Battery voltages
12/24/48 V Auto Select (software tool needed to select 36 V)
Maximum PV input power
860 W (12 V) / 1720 W (24 V) / 2580 W (36 V) / 3440 W (48 V)
Peak efficiency
Not stated

Evidence score

This category has no Evidence score.

Certificates

What this shows: what each record says and how far it reaches. It does not mean the product is approved.
EN/IEC 62109-1manufacturer claimpresent at observation[3]
Scope
unresolved document set
Covered models
MPPT 250/60; MPPT 250/70
Limitations
Victron Energy's own range datasheet prints "Safety EN/IEC 62109-1, UL 1741, CSA C22.2" under STANDARDS for this model family, captured September 28, 2026. Recorded as printed: no certificate number or issuing body file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[3]
UL 1741manufacturer claimpresent at observation[3]
Scope
unresolved document set
Covered models
MPPT 250/60; MPPT 250/70
Limitations
Victron Energy's own range datasheet prints "Safety EN/IEC 62109-1, UL 1741, CSA C22.2" under STANDARDS for this model family, captured September 28, 2026. Recorded as printed: no certificate number or issuing body file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[3]
CSA C22.2manufacturer claimpresent at observation[3]
Scope
unresolved document set
Covered models
MPPT 250/60; MPPT 250/70
Limitations
Victron Energy's own range datasheet prints "Safety EN/IEC 62109-1, UL 1741, CSA C22.2" under STANDARDS for this model family, captured September 28, 2026. Recorded as printed: no certificate number or issuing body file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[3]

Warranty

Unknown: no warranty facts recorded.

Recalls / legal notices

No recalls on file. All notices · Report a notice

This register is incomplete. A missing notice does not establish that a product has no recalls.

Documents

  • Manuals

  • Victron Energy MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026)Official · Victron Energy · Official installation manual · June 2026 · PDF
    Source details
    Revision
    Rev 12
    Revision date
    June 2026

    Archived copy captured on 2026-10-01.

    Location: PDF page 1 cover and PDF page 8, 2.1 table of solar chargers covered by this manual

    Retrieved Oct 1, 2026

    Victron Energy's own installation and user manual for the SmartSolar MPPT 150/60 up to 250/70 solar chargers, captured 1 October 2026 from victronenergy.com; Rev 12 - 06/2026 as printed; its section 2.1 table names the MPPT 150/60, 150/70, 250/60 and 250/70, each as a Tr or MC4 version. Manufacturer instructions, not independent tests.

    Archived copies

    Archived copy of a document published by Victron Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupRev 12 · 10.67 MB

    Archived copy, unaltered, kept as a record of what Victron Energy published. Original address: https://www.victronenergy.com/upload/documents/Manual_SmartSolar_MPPT_150-60_up_to_250-70/29694-MPPT_solar_charger_manual-pdf-en.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    None
    Embedded modification date
    None
    Pages
    74

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: d57c25947d20b07fdaeab0465bc6cf6a792b915bef16969c1d1ea6df33a3381d

    Open
  • Datasheets

  • SmartSolar Charge Controllers with screw- or MC4 PV connection MPPT 250/60 & MPPT 250/70 datasheet (September 28, 2026 capture)Official · Victron Energy · Official datasheet · PDF
    Certificate & compliance claims (3)
    EN/IEC 62109-1Manufacturer claim · unresolved document setClaimedListed when checked

    Victron Energy's own range datasheet prints "Safety EN/IEC 62109-1, UL 1741, CSA C22.2" under STANDARDS for this model family, captured September 28, 2026. Recorded as printed: no certificate number or issuing body file number is given, so it is a manufacturer claim and not issuer-verified.

    Manufacturer document

    Official datasheet: SmartSolar Charge Controllers with screw- or MC4 PV connection MPPT 250/60 & MPPT 250/70 datasheet (September 28, 2026 capture)
    UL 1741Manufacturer claim · unresolved document setClaimedListed when checked

    Victron Energy's own range datasheet prints "Safety EN/IEC 62109-1, UL 1741, CSA C22.2" under STANDARDS for this model family, captured September 28, 2026. Recorded as printed: no certificate number or issuing body file number is given, so it is a manufacturer claim and not issuer-verified.

    Manufacturer document

    Official datasheet: SmartSolar Charge Controllers with screw- or MC4 PV connection MPPT 250/60 & MPPT 250/70 datasheet (September 28, 2026 capture)
    CSA C22.2Manufacturer claim · unresolved document setClaimedListed when checked

    Victron Energy's own range datasheet prints "Safety EN/IEC 62109-1, UL 1741, CSA C22.2" under STANDARDS for this model family, captured September 28, 2026. Recorded as printed: no certificate number or issuing body file number is given, so it is a manufacturer claim and not issuer-verified.

    Manufacturer document

    Official datasheet: SmartSolar Charge Controllers with screw- or MC4 PV connection MPPT 250/60 & MPPT 250/70 datasheet (September 28, 2026 capture)
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-28.

    Location: SmartSolar Charge Controller 250/60, 250/70 specifications table

    Retrieved Sep 28, 2026

    Victron Energy's own range datasheet for this family, fetched directly from victronenergy.com/upload/documents/, captured September 28, 2026. Its own specifications table prints one column per rated current (250/60, 250/70) and separately distinguishes Tr (screw terminal) from MC4 connector variants for PV terminals and dimensions; this build reads each model's own current column and its own connector row only. Fetched and read in full.

    Archived copies

    Archived copy of a document published by Victron Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupRevision not recorded · 0.37 MB

    Archived copy, unaltered, kept as a record of what Victron Energy published. Original address: https://www.victronenergy.com/upload/documents/Datasheet-SmartSolar-charge-controller-MPPT-250-60-and-250-70-EN.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    None
    Embedded modification date
    None
    Pages
    2

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: 52d037a00e342be941bbcb5f3790edd944ef249389d2a862e8a3e08440a864fc

    Open
  • Other documents

  • SmartSolar MPPT 150/60 up to 250/70 product page (September 28, 2026 capture)Official · Victron Energy · Official product page · Web page
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-28.

    Location: Embedded product data (skus array, is_eol_sku and replacement_skus fields); images/thumbnails array

    Retrieved Sep 28, 2026

    Victron Energy's own product page on victronenergy.com titled "SmartSolar MPPT 150/60 up to 250/70", captured September 28, 2026. Its own embedded product data lists the current, non-discontinued part number for each Tr and MC4 variant of the 150/60, 150/70, 250/60 and 250/70 models (marking superseded part numbers is_eol_sku:true with a replacement_skus chain, which this build follows to the current SKU), and a shared product photograph; used here only for manufacturer_sku and the photograph, not for any spec figure. No live SKU is printed on this page for a 150/70-MC4 or 250/70-MC4 variant, so those variants are not recorded.

    Open

Archive and older revisions

Archive and older revisions0

Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.

Archived documents

SmartSolar Charge Controllers with screw- or MC4 PV connection MPPT 250/60 & MPPT 250/70 datasheet (September 28, 2026 capture)

Archived copy of a document published by Victron Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupRevision not recorded · 0.37 MB

Archived copy, unaltered, kept as a record of what Victron Energy published. Original address: https://www.victronenergy.com/upload/documents/Datasheet-SmartSolar-charge-controller-MPPT-250-60-and-250-70-EN.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
None
Embedded modification date
None
Pages
2

Embedded dates are file metadata, not independent proof of publication.

SHA-256: 52d037a00e342be941bbcb5f3790edd944ef249389d2a862e8a3e08440a864fc

Victron Energy MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026)

Archived copy of a document published by Victron Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupRev 12 · 10.67 MB

Archived copy, unaltered, kept as a record of what Victron Energy published. Original address: https://www.victronenergy.com/upload/documents/Manual_SmartSolar_MPPT_150-60_up_to_250-70/29694-MPPT_solar_charger_manual-pdf-en.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
None
Embedded modification date
None
Pages
74

Embedded dates are file metadata, not independent proof of publication.

SHA-256: d57c25947d20b07fdaeab0465bc6cf6a792b915bef16969c1d1ea6df33a3381d

Submit a document

Parts and accessories

No sourced accessories or replacement parts listed yet.

Model history

Model identity

Model
SmartSolar MPPT 250/60-MC4

Manufacturer SKU SCC125060321 · US market

No historical observations recorded yet.

Other recorded fields

FieldValueConditionsSource
Evidence breakdownUnknown

Community discussions

No discussions linked yet. Search DIY Solar Forum

Sources

  1. SmartSolar MPPT 150/60 up to 250/70 product page (September 28, 2026 capture) (Victron Energy · manufacturer · observed Sep 28, 2026)
  2. Victron Energy MPPT solar charger manual SmartSolar MPPT 150/60 up to 250/70 (Rev 12 - 06/2026) (Victron Energy · manufacturer · Rev 12 · observed Oct 1, 2026)
  3. SmartSolar Charge Controllers with screw- or MC4 PV connection MPPT 250/60 & MPPT 250/70 datasheet (September 28, 2026 capture) (Victron Energy · manufacturer · observed Sep 28, 2026)

Sign in to report an error on this page

Similar products

All with a price