Cell / component only. Victron's public API records "IEC 62619" in its safetyCells field for exact SKU BAT512110740. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and a cell-level standard does not establish product-level certification.
Cell / component only. Victron's public API records "UL 1973" in its safetyCells field for exact SKU BAT512110740. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and a cell-level standard does not establish product-level certification.
Cell / component only. Victron's public API records "UL 9540A" in its safetyCells field for exact SKU BAT512110740. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and a cell-level standard does not establish product-level certification.
Product / system scope unresolved. Victron's public API records "ECE R10-7" in its automotive field for exact SKU BAT512110740, and a manufacturer-hosted certificate document (Certificate Automotive ECE R10/7 - Lithium SuperPack NG 12,8V 100Ah/200Ah, 25,6V 100Ah) lists this SKU. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "CSA C22.2 107.1-16" in its safety field for exact SKU PMP122305122. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-1" in its safety field for exact SKU PMP122305122. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-2-29" in its safety field for exact SKU PMP122305122. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "UL 458" in its safety field for exact SKU PMP122305122, and a manufacturer-hosted certificate document (Declaration of Conformity - MultiPlus-II (GX) 3kVA, 5kVA, 8kVA, 10kVA, 15kVA) lists this SKU. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "CSA C22.2 107.1-16" in its safety field for exact SKU PMP242305102. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-1" in its safety field for exact SKU PMP242305102. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-2-29" in its safety field for exact SKU PMP242305102. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "UL 458" in its safety field for exact SKU PMP242305102, and a manufacturer-hosted certificate document (Declaration of Conformity - MultiPlus-II (GX) 3kVA, 5kVA, 8kVA, 10kVA, 15kVA) lists this SKU. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "CSA C22.2 107.1-16" in its safety field for exact SKU PMP242505110. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-1" in its safety field for exact SKU PMP242505110. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-2-29" in its safety field for exact SKU PMP242505110. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-1" in its safety field for exact SKU PMP482505120. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-2-29" in its safety field for exact SKU PMP482505120. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "CSA C22.2 107.1-16" in its safety field for exact SKU PMP482505120. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-1" in its safety field for exact SKU QUA482501102. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-2-29" in its safety field for exact SKU QUA482501102. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 62109-1" in its safety field for exact SKU QUA482501102. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "UL 1741" in its safety field for exact SKU QUA482501102, and a manufacturer-hosted certificate document (Certificate UL 1741 - Quattro 48V 5kVA 10kVA 120V) lists this SKU. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-1" in its safety field for exact SKU QUA483100102. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
Product / system scope unresolved. Victron's public API records "EN-IEC 60335-2-29" in its safety field for exact SKU QUA483100102. This is a manufacturer statement: no issuer listing, certificate number, edition, scope or validity was independently checked, and the covered configuration is not established beyond the listed SKU.
This manufacturer is listed as Victron Energy. Manufacturing entities, factories, cell origin and model-specific ownership relationships have not been audited.
Product certificates and company management certificates are tracked separately. No company management certificates have been reviewed for this manufacturer yet.
This is such a good value for anyone wanting to add liquid level/pressure sensing to an installation. I have used these with cheap amazon level transducers (0-1m) to measure black water tanks, and even levels in a commercial sump pump system in a datacenter. Commercial/industrial equivalents are usually clunky and expensive. This is very plug and play.
I have this unit installed in a portable battery box. It replaced another charge controller that I liked better, other than the prior controllers dying. It was replaced, and the second one died too when trying to charge the battery with an external charger. The company did state that charging directly at the battery terminal should not cause any problems. So far, the charging the battery with an external charger has worked on the Victron.
Would be nice if there was an option that did not include Bluetooth in this size category. For my battery box, Bluetooth is an extra that is not needed.
I also used this model in a solar camera setup over a year ago and only had one glitch. The controller needed to be power cycled; it was stuck in a state where it showed the battery voltage higher than the actual battery voltage.
It would be really nice if the streetlight feature could be reversed so when the panel no longer sees adequate sunlight, it opens the relay instead of closing it. The cameras get shut down via an external relay and light sensor to conserve battery over the evening hours.
overall it is very good.
the price is just way high, but if you can afford it you wont regret it.
good:
huge torroid transformer inside
very good at surge current
nice efficency
extremely quiet and the fan only runs when it needs
downsides:
only 1outlet
input terminals are bare wire clamps that are very close to each other. not that big either.
the eco mode pulse the output and is not sensible. if you have a low power load(s) it will turn the things on/off all the time for hours and never stops.
Inefficient operation during partial shading of a string
The photos show a comparison of power generation.
Test conditions:
There are two horizontally arranged strings, each consisting of 6 panels. The top string is connected to a Deye 6K-SG03LP1-EU inverter, while the bottom string is connected to a Victron MPPT RS 450/100. At a certain point, both strings become partially shaded by an electrical utility pole. The Victron MPPT RS system fails to handle this shading issue. Please refer to the photos.
I installed a 50 watt solar panel and this controller. My output is reduced because it is a PWM device but the overhead is low and the panel output is low so I can't say that in the long run it is lower. The usb output allows me to keep a phone hot spot powered. This system was installed because the marina lost power for several months. A marine environment is a killer and this unit has worked flawlessly.
Almost forgotten the Orion is there since there have been no issues. Victron is a high tier brand so the experience so far is what I expected.
This is my first Victron product and introduction to their ecosystem, but so far the iOS application has been easy to work through for settings and data.
Will update if things change.
I have two of these running in parallel in my 50A RV and in my opinion they are perfect for a rig like mine. Running two of these in parallel gives me 4800 total watts available when inverting which is more than enough 95% of the time.
The thing i really appreciate about this model is the seamless operation when moving between a single phase input like a 30A rv plug to a split phase connection like a 50A rv plug and that the entire 4800W is available to either leg of the 50A panel vs using 2 120v models where you would have 2400 per line and overloading is more of a possibility if you are running two high draw appliances on the same line.
I also really appreciate the power assist feature. It has enables us to stay in 30A parks in the heat of summer and still be able to run all three of our A/C units. Once the inverter senses your draw is near or over the 30A limit it inverts and kicks in the extra power needed. Yes this draws down the batteries but they will recharge off solar if you have it and once the load drops down below 3600W it will charge them again. This function and the "ecosystem" of components that work together is really what separates Victron from everyone else in the RV world.
DYI install February 2025. Split phase configuration with 6 x Pytes V.5 batteries, Cerbo GX and EG4 Chargeverter. System has been rock solid with no issues.
Simple installation and configuration using the inbuilt Victron Connect and connection to the VRM cloud platform. The system has performed continuously for the six months to date and is working well with the 2 x Pylontech US5000 batteries. The system did lose connection with the Victron MPPT once, but this cleared with a GX reset and hasn't been a problem since I updated the MPPT firmware.
Multiplus II has lots of options available but many aren't used in my off-grid set-up.
When designing our RV electrical upgrade, the Lynx Distributor stood out as a simple, cost-effective solution for bus bars and fuses, in a relatively small footprint. It provides four Mega-fused positive circuits along with four ground connections, and the bus bar ends can be used as main power and ground connections. The bus bars have high amperage capacity and they integrate nicely with a battery switch.
The Lynx is designed as a component that bolts directly to other Victron devices, but it functions perfectly on its own if you make one small addition. The indicator LEDs for the fuses are not powered if the Lynx is used as a standalone device, but instructions for adding the required wiring to power them are available on YouTube. It's simple and inexpensive.
Overall, the build quality is excellent. However, here are a couple of suggested improvements:
1 - It should come with fully-functional LED wiring for standalone use. At a minimum, Victron should offer it as an option/accessory.
2 - It would be nice if it had knobs instead of screws on the cover, given that it contains fuses that may need to be replaced. In the tight confines of my installation, screws won't work, and I ended up making my own knobs.
I definitely recommend the Lynx Distributor and would buy it again if I have a need. I purchased it from InvertersRUs (https://invertersrus.com/), a large Victron distributor/retailer in the US.
I used three Quattro-II units to build out a 3-phase system, and the hardware definitely lives up to the reputation. Setting up 3-phase power usually introduces a lot of configuration headaches, but Victron’s VEConfigure software made the phase synchronization straightforward. Getting the master and followers properly mapped and communicating took a fraction of the time I expected compared to other platforms.
The UI isn't flashy, but it’s functional and lets you dial in specific charging profiles, set up assistants, and configure grid-parallel settings without any guesswork. Terminal blocks inside the chassis also offer plenty of room, making the heavy-gauge AC and DC wiring manageable.Performance-wise, the system has been completely stable since commissioning. It handles high inrush currents and unbalanced loads across the phases without throwing faults or overheating.
The dual AC inputs switch over between the grid and generator seamlessly under load, maintaining a clean sine wave without dropping sensitive electronics. It’s an expensive investment upfront, but the build quality, predictable firmware, and detailed remote monitoring via a Cerbo GX and the VRM portal make it worth the cost for a complex multi-inverter build.
Getting the inverters to communicate with the batteries is also easy; just a matter of plugging in the CAN cable and the battery will show up in the Cerbo GX. For this kind of set-up, the Cerbo GX addition is highly recommended.
