Charged ReviewsSaved 0Compare 0Login
Dyness STACK100 battery module (51.2 V, 100 Ah)
Dyness
DC battery module

Dyness STACK100 battery module (51.2 V, 100 Ah)

Key specs

Nominal voltage51.2 V
Capacity100 Ah
Weight47 kg / 100 lb converted
Nominal energy5.12 kWh
Cycle life8,000 cycles
Continuous discharge100 A

1 spec not documented yet: usable energyHelp fill in ›

All specifications

Identity

BrandDyness · Website
ModelSTACK100
MarketUS
Manufacturer SKUUnknown
About brandDyness Digital Energy Technology Co., Ltd. says on its Company Profile page that it was established in 2017 and specializes in the research, development, production and sales of energy storage systems for residential, commercial and industrial use. Its site lists its address in Suzhou, China, and Dyness USA runs the dyness.us storefront.
SKU detail
conditions: No SKU or part number is printed on either dyness.com's STACK100 product page, the STACK100 datasheet or the STACK100 user manual.
Sources: No source on record
FieldValueConditionsSource
TerminalsComposite connectors (male and female) for module output and communication
Printed as "1 Composite connector - male Battery module output and communication interface" in the Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu) (page 16, Table 2-3 Connector definition).
Where: PDF page 16, Table 2-3 Connector definition
[1]
Weight47 kg / 100 lb converted
Printed identically as "47Kg" in all three Dyness documents. A PV distributor's own listing for the same module instead prints 50.82 kg, kept as an alternative.
Where: Technical Specifications table, (Signal/Single) Module Weight
Sources
50.82 kg

A distributor's own listed weight, not a manufacturer figure.

[2]
[3] [4] [1]
Cycle life8,000 cycles
Printed as "\u22658000 cycles" in the datasheet; the user manual instead prints "Unlimited cycles / 10 Years" for the same row. Both are manufacturer documents; neither is preferred here.
Where: Technical Specifications table, Cycle Life
Sources
Unlimited cycles / 10 Years

Printed identically for every STACK100-3s through STACK100-15s configuration in the user manual's parameter table.

[1]
[4]
Capacity100 Ah
As printed, identically in all three Dyness documents.
Where: Technical Specifications table, Module Voltage/Capacity
[3] [4] [1]
DimensionsW 390 × H 233 × L 590 mm / W 15.4 × H 9.17 × L 23.2 in converted
Dyness' own datasheet and user manual print only an assembled cluster's dimension (for example "591*390*1700mm" for an 11-module stack), not a single module's own dimension. This figure is a PV distributor's own listing for the single module, used as a cited fallback, recorded in the distributor's own printed order (width, depth, height).
Where: Product details table, Net width/depth/height
[2]
Mounting typeStack type
Printed as "Installation method Stack type Cooling method" in the Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu) (page 11, Table 2-1 Parameters of the STACK100 system).
Where: PDF page 11, Table 2-1 Parameters of the STACK100 system
[1]
Battery format
Stackable
Site classificationBased onSource datasheet
Details

Charged Reviews classified this product from the documents it is based on. It is our own grouping, not a manufacturer claim.

Printed as "Stacked type". Classified as Stackable from the maker's own words for this model.

Source datasheet: Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com)

Location: Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com), specification table, page 2

CommunicationsCAN; RS485
As printed, identically for every configuration in the user manual's parameter table (printed with a space as "CAN/ RS485").
Where: Table 2-1, Communication row
[1]
Enclosure ratingIP20
As printed, identically for every configuration in the user manual's parameter table.
Where: Table 2-1, Protection Level row
[1]
Peak discharge125 A
Printed as "125A (1.25C)" for 2 minutes at 25°C, identically for every configuration in the user manual's parameter table.
Where: Table 2-1, Peak Discharge Current(2min 25℃) row
[1]
Nominal voltage51.2 V
As printed, identically in all three Dyness documents.
Where: Technical Specifications table, Module Voltage/Capacity
[3] [4] [1]
Series connectionyes
Printed as "multiple battery modules can be connected in series for expanding voltage and capacity." in the Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu) (page 8, section 1 Product Properties).
Where: PDF page 8, section 1 Product Properties
[1]
Max parallel units15 count
The user manual's parameter table lists no configuration past STACK100-15s (System Energy Range 76.8kWh, matching the datasheet's own printed maximum); the datasheet separately prints the same maximum as "System Modules Serial Number 3~15". Up to 12 such clusters may additionally be paralleled per both dyness.com and dyness.us, reaching a printed maximum system energy of 921.6 kWh; that separate parallel-cluster count is not itself stored in this field.
Where: Table 2-1 (modules STACK100-3s through STACK100-15s); datasheet System Modules Serial Number row
[1] [4]
Nominal energy5.12 kWh
Dyness' own STACK100 datasheet and user manual print this module's voltage and capacity as "51.2V/100Ah" but never print a standalone module energy figure in Wh or kWh (only per-cluster system energy totals for 3 to 15 modules in series). This figure is a PV distributor's own listing for the module, used as a cited fallback; it is consistent with the manufacturer's printed 15.36 kWh (datasheet) / 15.4 kWh (user manual) total for the smallest 3-module cluster (STACK100-3s) divided evenly by three, but is not itself computed here.
Where: Product details table, Capacity
[2]
Continuous charge100 A
Printed as one figure for charge and discharge, at 1C, identically for every configuration in the user manual's parameter table.
Where: Table 2-1, Max.Charge/Discharge Current row
[1]
Charge temperature0 to 55 °C / 32 to 131 °F converted
Printed as "0~55℃" in the datasheet; the user manual instead prints "0~50℃" for the same row.
Where: Technical Specifications table, Charging Temp. Range
Sources
0 to 50 °C

Printed identically for every configuration in the user manual's parameter table.

[1]
[4]
Recommended charge50 A
Printed as one figure for charge and discharge, at 0.5C, identically for every configuration in the user manual's parameter table.
Where: Table 2-1, Recommended Charge/Discharge Current row
[1]
Battery compatibilityGoodwe, Solis, Deye, Solplanet, Solinteg, Sunways, Hoymiles, SAJ, Sinexcel, Growatt, ATESS, Megarevo, Sineng and others
Printed as "Compatible Inverters Goodwe/Solis/Deye/Solplanet/Solinteg/Sunways /Hoymiles/SAJ/Sinexcel/Growatt/ATESS/Megarevo /Sineng etc." in the Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu) (page 11, Table 2-1 Parameters of the STACK100 system).
Where: PDF page 11, Table 2-1 Parameters of the STACK100 system
[1]
Continuous discharge100 A
Printed as one figure for charge and discharge, at 1C, identically for every configuration in the user manual's parameter table.
Where: Table 2-1, Max.Charge/Discharge Current row
[1]
Depth of discharge95 %
As printed, identically for every configuration in the user manual's parameter table; the datasheet prints the same "95%" figure but not adjacent to its label.
Where: Table 2-1, Depth of Discharge row
[1]
Discharge temperature-20 to 55 °C / -4 to 131 °F converted
Printed as "-20~55℃" in the datasheet; the user manual instead prints "-20~50℃" for the same row.
Where: Technical Specifications table, Discharging Temp. Range
Sources
-20 to 50 °C

Printed identically for every configuration in the user manual's parameter table.

[1]
[4]
Operating temperature0 to 50 °C / 32 to 122 °F converted
Printed as "Ambient temperature (°C) 0 to +50" in the Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu) (page 14, Table 2-2 Battery module S51100).
Where: PDF page 14, Table 2-2 Battery module S51100
[1]

Owner reviews

No owner reviews yet
Write a review

Sellers

No listed sellers in this data.

Price history

No seller price history.

Quick reference sheet

Basic specs
5.12 kWhDischarge 100 ACharge 100 APeak current: 125 A
$ / rated kWh
Unavailable
Warranty
UnknownSee terms
Lifetime production
Not published
Size
53.61 L* (Calculated enclosure volume: W × H × D in mm ÷ 1,000,000)W: 390 × H: 233 × L: 590 mm / W: 15.4 × H: 9.17 × L: 23.2 in47 kg / 100 lb0.1 kWh/L* (Rated or usable capacity shown on this card ÷ enclosure volume)

Evidence score

4/100Missing details20% documented

The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.

Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.

Missing for this product: Certificates evidence needed; Warranty term needed; Warranty energy disclosure evidence needed; Cell model disclosure evidence needed.

48 V · Stackable · Rated capacity

The warranty term and the lifetime energy are each scored against the best documented value for a home storage battery: a value earns its share of that best, times the weight. A documented value always earns points; an undisclosed one earns 0.

Lifetime / capacity8,000 cycles4 / 20

Cycle rating disclosed · 20% weight

Documented cycle rating earns 20% of this criterion. More evidence is needed to compare lifetime MWh per kWh.

20 × 0.2 = 4 points.

[4]

Research pending, 0 points: Certificates, Warranty term, Warranty energy disclosure, Cell model disclosure.

Computed from public specifications and evidence records. Warranty duration is not service quality; certificate evidence points are not a safety rating. Compatibility and installation limits still apply.

Certificates

What this shows: what each record says and how far it reaches. It does not mean the product is approved.
62040manufacturer claimpresent at observation[1] [4]
Scope
unresolved document set
Covered models
STACK100
Limitations
Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "62040", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1] [4]
62477manufacturer claimpresent at observation[1] [4]
Scope
unresolved document set
Covered models
STACK100
Limitations
Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "62477", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1] [4]
62619manufacturer claimpresent at observation[1] [4]
Scope
unresolved document set
Covered models
STACK100
Limitations
Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "62619", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1] [4]
63056manufacturer claimpresent at observation[1] [4]
Scope
unresolved document set
Covered models
STACK100
Limitations
Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "63056", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1] [4]
CE EMCmanufacturer claimpresent at observation[1] [4]
Scope
unresolved document set
Covered models
STACK100
Limitations
Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "CE EMC", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1] [4]
CE REDmanufacturer claimpresent at observation[1] [4]
Scope
unresolved document set
Covered models
STACK100
Limitations
Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "CE RED", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1] [4]
UN38.3manufacturer claimpresent at observation[1] [4]
Scope
unresolved document set
Covered models
STACK100
Limitations
Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "UN38.3", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1] [4]

Warranty

Unknown: no warranty facts recorded.

Recalls / legal notices

No recalls on file. All notices · Report a notice

This register is incomplete. A missing notice does not establish that a product has no recalls.

Documents

  • Manuals

  • Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu)7sun (7sun.eu) · Source user manual · PDF
    Certificate & compliance claims (7)
    CE EMCManufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "CE EMC", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source user manual: Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu)
    CE REDManufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "CE RED", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source user manual: Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu)
    62619Manufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "62619", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source user manual: Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu)
    63056Manufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "63056", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source user manual: Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu)
    62477Manufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "62477", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source user manual: Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu)
    62040Manufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "62040", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source user manual: Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu)
    UN38.3Manufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "UN38.3", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source user manual: Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu)
    Source details
    Revision
    20240930-V1-EN
    Revision date
    Not stated

    Archived copy captured on 2026-09-28.

    Location: Section 2, Table 2-1 Parameters of the STACK100 system

    Retrieved Sep 27, 2026

    Dyness's own STACK100 user manual, hosted by 7sun (7sun.eu), a distributor, because Dyness's own download folder on dyness.com is disallowed by its robots.txt (logged). A copy of Dyness' own STACK100 user manual (file version-20240930-V1-EN), hosted by the PV distributor 7sun.eu and found as a WebSearch lead, fetched September 28, 2026 because Dyness' own upload folder disallows fetching in its robots.txt. Its System Performance Parameter table (Table 2-1) prints a distinct model row for each of ten series configurations, STACK100-3s through STACK100-12s, each with its own single system energy figure (not a range) together with shared module-level figures (voltage/capacity, current ratings, weight, temperature range, protection level, communication and certification) that apply to every configuration. Its title page prints an overall operating-voltage range of 153.6-768V and a "Cycle Life Unlimited cycles / 10 Years" claim, both of which disagree with the STACK100 datasheet's 134-876V range and "\u22658000 cycles" claim; both are recorded, neither resolved.

    Archived copies

    Archived copy of a document published by 7sun (7sun.eu). Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backup20240930-V1-EN · 2.63 MB

    Archived copy, unaltered, kept as a record of what 7sun (7sun.eu) published. Original address: https://7sun.eu/wp-content/uploads/2025/12/Dyness-STACK100-Manual.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    Embedded modification date
    Pages
    44

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: d6bdcfff11cfa5222875262738d6e32d0464d1b7c239367702f1a49e83a16514

    Open
  • Datasheets

  • Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com)Hung Viet (hungvietgt.com) · Source datasheet · PDF
    Certificate & compliance claims (7)
    CE EMCManufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "CE EMC", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source datasheet: Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com)
    CE REDManufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "CE RED", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source datasheet: Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com)
    62619Manufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "62619", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source datasheet: Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com)
    63056Manufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "63056", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source datasheet: Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com)
    62477Manufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "62477", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source datasheet: Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com)
    62040Manufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "62040", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source datasheet: Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com)
    UN38.3Manufacturer claim · unresolved document setClaimedListed when checked

    Printed in the STACK100 datasheet's and user manual's "Certification & Safety Standard" row exactly as "UN38.3", without a standards-body prefix (for example "62619" rather than "IEC 62619") or a certificate number; recorded exactly as printed rather than assumed to be a specific IEC standard. No certification body was named and no issuer record was checked.

    Manufacturer document

    Source datasheet: Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com)
    Source details
    Revision
    V1.0-20240515
    Revision date
    Not stated

    Archived copy captured on 2026-09-28.

    Location: Technical Specifications table

    Retrieved Sep 27, 2026

    Dyness's own STACK100 datasheet, hosted by Hung Viet (hungvietgt.com), a distributor, because Dyness's own download folder on dyness.com is disallowed by its robots.txt (logged). A copy of Dyness' own STACK100 datasheet (file version V1.0-20240515), hosted by the distributor hungvietgt.com and found as a WebSearch lead, fetched September 28, 2026 because Dyness' own datasheet folder (dyness.com/Public/Uploads/uploadfile) disallows fetching in its robots.txt (confirmed blocked at Sep 28, 2026 for the equivalent dyness.com-hosted file; logged in data/research/2026-09-28/blocked-sources-build-dyness.json). Its printed technical specifications table matches the dyness.com STACK100 product page and gives the fuller System Modules Serial Number, Recommended/Max/Peak current and certification rows read here.

    Archived copies

    Archived copy of a document published by Hung Viet (hungvietgt.com). Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupV1.0-20240515 · 3.28 MB

    Archived copy, unaltered, kept as a record of what Hung Viet (hungvietgt.com) published. Original address: https://hungvietgt.com/upload/file/dyness-stack100-datasheet-en.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    Embedded modification date
    Pages
    2

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: 5a6da67bdcf2d3a5c284728a5d5a96e947e1475c126e4378e50e4775a895f5ee

    Open
  • Other documents

  • Dyness STACK100 product page, dyness.com (global site, September 28, 2026 capture)Official · Dyness Digital Energy Technology Co., Ltd. · Official product page · Web page
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Archived copy captured on 2026-09-28.

    Location: Technical Specifications table

    Retrieved Sep 27, 2026

    Dyness' own global product page for STACK100, captured September 28, 2026, listed under Products > C&I Energy Storage Systems > Stacked ESS. Its Technical Specifications table prints the same 51.2V/100Ah module and 15.36-76.8kWh system energy range as the STACK100 datasheet. Its own sidebar states "Sales Area Global (Excluding North America)", which disagrees with the same model being listed for sale on dyness.us, the North America storefront; recorded as printed, not resolved.

    Open

Archive and older revisions

Archive and older revisions2

Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.

  • 7SUN distributor listing, "Battery module - DYNESS - STACK100 - 5.12 kWh - High Voltage"7sun (7sun.eu) · Distributor product page · Web page
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Archived copy captured on 2026-09-28.

    Location: Product details table

    Retrieved Sep 27, 2026

    7sun's own product listing for the Dyness STACK100 module (a distributor's page, not a Dyness document); cited only for the module figures no Dyness document prints. A Polish PV/BESS distributor's own product listing for the Dyness STACK100 module, captured September 28, 2026, used as a cited fallback only for the single-module capacity (5.12 kWh) and physical dimensions, which no Dyness document read in this pass prints on its own (Dyness' own documents give module voltage and Ah capacity and, separately, whole-system or whole-cluster totals, but never a standalone module kWh or module-only dimension). This is a distributor's own specification listing, not a manufacturer claim; its weight (50.82 kg) and dimensions (590x390x233mm) differ from the manufacturer's own printed module weight (47 kg) and cluster dimension figures.

    Open
  • Dyness STACK100 product page, dyness.us (North America storefront, September 28, 2026 capture)Official · Dyness Digital Energy Technology Co., Ltd. · Official product page · Web page
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Archived copy captured on 2026-09-28.

    Location: Body copy; product image gallery

    Retrieved Sep 27, 2026

    dyness.us's own STACK100 storefront page (Shopify), captured September 28, 2026. Its body copy matches dyness.com's global STACK100 page and the storefront products feed; used here only for its own product photograph, since dyness.com's STACK100 images are hosted under a robots-disallowed path.

    Open

Archived documents

Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com)

Archived copy of a document published by Hung Viet (hungvietgt.com). Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupV1.0-20240515 · 3.28 MB

Archived copy, unaltered, kept as a record of what Hung Viet (hungvietgt.com) published. Original address: https://hungvietgt.com/upload/file/dyness-stack100-datasheet-en.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
Pages
2

Embedded dates are file metadata, not independent proof of publication.

SHA-256: 5a6da67bdcf2d3a5c284728a5d5a96e947e1475c126e4378e50e4775a895f5ee

Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu)

Archived copy of a document published by 7sun (7sun.eu). Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backup20240930-V1-EN · 2.63 MB

Archived copy, unaltered, kept as a record of what 7sun (7sun.eu) published. Original address: https://7sun.eu/wp-content/uploads/2025/12/Dyness-STACK100-Manual.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
Pages
44

Embedded dates are file metadata, not independent proof of publication.

SHA-256: d6bdcfff11cfa5222875262738d6e32d0464d1b7c239367702f1a49e83a16514

Submit a document

Parts and accessories

No sourced accessories or replacement parts listed yet.

Model history

Model identity

Model
STACK100

Manufacturer SKU unknown · US market

No historical observations recorded yet.

Other recorded fields

FieldValueConditionsSource
Evidence breakdown
method version: 0.21-personal
documented pct: 20
basis: nominal
missing:
Certificates evidence needed
Warranty term needed
Warranty energy disclosure evidence needed
Cell model disclosure evidence needed
criteria:
key: certificateEvidence
label: Certificates
value: 0
unit: evidence points
shown: CE EMC · CE RED +5
shown detail: Research pending
state: pending
points: 0
ceiling: 45
weight: 45
share: 0
covered: no
missing: yes
folded: yes
reason: Unknown
reason text: Unknown
note: No qualifying applicable evidence recorded. This is not proof that certification is absent. Applies: CEC; UL 9540; UL 1973.
display note: Unknown
Sources: No source on record
key: years
label: Warranty term
value: Unknown
unit: years
shown: Research pending
shown detail: Unknown
state: pending
points: 0
ceiling: 20
weight: 20
share: Unknown
covered: no
missing: yes
folded: yes
reason: undocumented
reason text: Not documented. Undisclosed data scores 0.
note: Not documented.
display note: Unknown
Sources: No source on record
key: throughputEvidence
label: Warranty energy disclosure
value: 0
unit: evidence points
shown: Research pending
shown detail: Unknown
state: pending
points: 0
ceiling: 10
weight: 10
share: 0
covered: no
missing: yes
folded: yes
reason: Unknown
reason text: Unknown
note: No qualifying quantified warranty energy recorded. This is an evidence gap, not a performance judgment.
display note: Unknown
Sources: No source on record
key: lifetime
label: Lifetime / capacity
value: Unknown
unit: MWh/kWh
shown: 8,000 cycles
shown detail: Unknown
state: documented
points: 4
ceiling: 20
weight: 20
share: Unknown
covered: yes
missing: no
folded: no
reason: Unknown
reason text: Unknown
note: Documented cycle rating earns 20% of this criterion. More evidence is needed to compare lifetime MWh per kWh.
display note: Unknown
Sources: [4]
key: cellDisclosure
label: Cell model disclosure
value: 0
unit: disclosure points
shown: Research pending
shown detail: Unknown
state: pending
points: 0
ceiling: 5
weight: 5
share: 0
covered: no
missing: yes
folded: yes
reason: Unknown
reason text: Unknown
note: A sourced cell manufacturer and model are needed. Grade A, chemistry and cell capacity alone do not identify a cell model.
display note: Unknown
Sources: No source on record

Community discussions

No discussions linked yet. Search DIY Solar Forum

Sources

  1. Dyness STACK100 User Manual, File version 20240930-V1-EN (distributor-hosted copy, 7sun.eu) (7sun (7sun.eu) · manufacturer document third party hosted · 20240930-V1-EN · observed Sep 27, 2026)
  2. 7SUN distributor listing, "Battery module - DYNESS - STACK100 - 5.12 kWh - High Voltage" (7sun (7sun.eu) · distributor · observed Sep 27, 2026)
  3. Dyness STACK100 product page, dyness.com (global site, September 28, 2026 capture) (Dyness Digital Energy Technology Co., Ltd. · manufacturer · observed Sep 27, 2026)
  4. Dyness STACK100 datasheet (distributor-hosted copy, hungvietgt.com) (Hung Viet (hungvietgt.com) · manufacturer document third party hosted · V1.0-20240515 · observed Sep 27, 2026)

Sign in to report an error on this page

Similar products

All with a price

* Missing details