Printed as "Battery Type | LiFePO 4" on page 21 of "Elite%20300%20User%20Manual%20US%20EN-FR-1772623629263-39f7.pdf", row "Battery Type"; a manufacturer figure as printed, not an independent test. No value was taken from another model.
Connect one end to the grounding terminal with a grounding screw and the other end to the wall outlet or home distribution box ground.
Printed as "Use a cable with OT terminals for grounding. Connect one end to the grounding terminal with a grounding screw and the other end to the wall outlet or home distribution box ground." in BLUETTI's User Manual V1.0 Important Instructions For the best experience and performance, update your unit to the lates (PDF page 25). The manual applies to this model: Elite 300 User Manual (US EN); names the Elite 300 exactly.
Printed as "AC Charging US: 1,800 W, 15 A Max., 120 V, 50/60 Hz" in the BLUETTI Elite 300 user manual (US, EN-FR), Specifications, captured on September 26, 2026. The US value of the "AC Charging" row.
Printed as "6000+ Battery Cycle Life" in the BLUETTI product page, captured on September 25, 2026. The source states no depth of discharge, charge or discharge rate, or test temperature beyond what is quoted.
Printed as "US: 2,400 W Max., 120 V, 50/60 Hz", captured on September 25, 2026. Manufacturer rating; the source does not state test temperature or power factor.
Where: User manual, Specifications, AC Output (Discharging) row
Printed as "Battery Capacity | 3,014.4 Wh (314 Ah)" on page 21 of "Elite%20300%20User%20Manual%20US%20EN-FR-1772623629263-39f7.pdf", row "Battery Capacity"; a manufacturer figure as printed, not an independent test. No value was taken from another model.
Printed as "1,200 W Max., 12 V to 60 V, 22 A", captured on September 25, 2026. Manufacturer rating; the source does not state test temperature or power factor. Printed for the DC input (XT60-F); the same manual says third-party solar panels with an open circuit voltage of 12 V-60 V can be used.
Where: User manual, Specifications, DC Input (XT60-F) row
Printed as "Wi-Fi (2.4 GHz)/Bluetooth (BLE 5.0)" in the BLUETTI Elite 300 user manual (US, English section) (PDF page 21, section 11 Specifications, Connectivity row).
Where: PDF page 21, section 11 Specifications, Connectivity row
Printed as "1,200 W Max., 12 V to 60 V, 22 A" in the BLUETTI Elite 300 user manual (US, English section) (PDF page 21, section 11 Specifications, DC Input (XT60-F) row).
Where: PDF page 21, section 11 Specifications, DC Input (XT60-F) row
Sources
Converted: 1200 W / 1000 = 1.2 kW
1,200 W
The value as the manual prints it, in W. Printed as "1,200 W Max., 12 V to 60 V, 22 A" in the BLUETTI Elite 300 user manual (US, English section) (PDF page 21, section 11 Specifications, DC Input (XT60-F) row).
Printed as "≤ 2,000 m/6,561.68 ft IP20" in the BLUETTI Elite 300 user manual (US, English section) (PDF page 21, section 11 Specifications, Protection Rating row).
Where: PDF page 21, section 11 Specifications, Protection Rating row
Printed as "US: 1,800 W, 15 A Max., 120 V, 50/60 Hz" in the BLUETTI Elite 300 user manual (US, English section) (PDF page 21, section 11 Specifications, AC Charging row). US line of the AC Charging row.
Where: PDF page 21, section 11 Specifications, AC Charging row
Sources
Converted: 1800 W / 1000 = 1.8 kW
1,800 W
The value as the manual prints it, in W. Printed as "US: 1,800 W, 15 A Max., 120 V, 50/60 Hz" in the BLUETTI Elite 300 user manual (US, English section) (PDF page 21, section 11 Specifications, AC Charging row). US line of the AC Charging row.
Printed as "IP20 10 ms Uninterruptible Power Supply (UPS) Switchover Time" in the BLUETTI Elite 300 user manual (US, English section) (PDF page 21, section 11 Specifications, UPS Switchover Time row).
Where: PDF page 21, section 11 Specifications, UPS Switchover Time row
Printed as "3,014.4 Wh (314 Ah) LiFePO4" in the BLUETTI Elite 300 user manual (US, English section) (PDF page 21, section 11 Specifications, Battery Capacity row).
Where: PDF page 21, section 11 Specifications, Battery Capacity row
Sources
Converted: 3014.4 Wh / 1000 = 3.0144 kWh
3,014.4 Wh
The value as the manual prints it, in Wh. Printed as "3,014.4 Wh (314 Ah) LiFePO4" in the BLUETTI Elite 300 user manual (US, English section) (PDF page 21, section 11 Specifications, Battery Capacity row).
Printed as "Voc: 12 V–60 V Current: 22 A Max. Power: 1,200 W Max." in the solar charging note, a range of solar panel open circuit voltage (Voc) for the solar (DC) input; the current and power caps printed with it are part of the same line. The manual also prints "Solar input voltage range for the unit is 12 V–60 V.".
Where: User manual, solar charging section (requirements note), Solar Panel (XT60 input port); Tips item 2
Printed as "US: 2,400 W Max., 120 V, 50/60 Hz" in the BLUETTI Elite 300 user manual (US, English section) (PDF page 21, section 11 Specifications, AC Output (Discharging) row). US line; other regions print 100 V or 230 V.
Where: PDF page 21, section 11 Specifications, AC Output (Discharging) row
I purchased the Elite 300 with no great knowledge, but had just watched a few YouTube videos and I was as novice as they come. Purchased for short term backup thru a 6 circuit sub-panel I’ve had and used with generator for years. The Bluetti has worked well, I was able to order a cable from Amazon to plug 30a AC to the outlet that powers my transfer switch. I started with (2)200w solar panels and eventually got 4. One of the few negatives with Elite 300 is PV charging max is 60v. Things I like: portability although not light it can be moved without much trouble. The software offers lots of options with various UPS working modes. It’s very quite. Although it’s not officially expandable you can use 48v battery to charge it/extend battery significantly by simply using a fused xt60 to ring terminal cable. That’s what I just recently started doing with a 100aH battery. The Elite obviously cannot charge the big battery in this setup so I have a Victron 150/35 charge controller and a total 1200w solar currently. I’ve had the Elite powering my 6 essential circuits full time for a little over a week. The circuits use about 10kwH daily and I’ve managed to supply about half from solar and the Elite seems fairly efficient passing grid power direct to usage when needed. I haven’t explicitly tested efficiency, inverter draw or capacity but overall it all works well and seems close to specs I’ve seen from others. Overall for someone just getting into solar I think the Elite 300 is a good place to start and the unit is very versatile, so it can be repurposed in several potential use cases. My plan now is the add A Ruixu SunOn3.6 and more solar to at least run my essential circuits fully off solar. I’m sure I’ll then find a good place to utilize the Elite 300
3,014.4 WhChemistry LiFePO4 · Cycle life 6,000 cycles
Rated AC output
2,400 W
Solar input limit
1,200 W
Solar input voltage
12-60 V
Weight
26.3 kg / 58 lbDimensions 305 W × 297.5 H × 366 L mm / 12 W × 11.71 H × 14.4 L in
Evidence score
14/100Missing details40% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Certificates evidence needed; Warranty energy disclosure evidence needed; Cell model disclosure evidence needed.
Power stations · 120 V AC · Rated capacity
The warranty term and the lifetime energy are each scored against the best documented value for a power station: a value earns its share of that best, times the weight. A documented value always earns points; an undisclosed one earns 0.
Printed as "Elite 300 60 months" in the BLUETTI US warranty period table, captured on September 25, 2026. Coverage, eligibility and remedies are set by the BLUETTI warranty policy, which restricts the limited warranty to the country of purchase.
Research pending, 0 points: Certificates, Warranty energy disclosure, Cell model disclosure.
Computed from public specifications and evidence records. Warranty duration is not service quality; certificate evidence points are not a safety rating. Compatibility and installation limits still apply.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
Unknown: no certification evidence recorded in this data.
Warranty
Field
Value
Conditions
Source
Warranty term
5 years
Printed as "Elite 300 60 months" in the BLUETTI US warranty period table, captured on September 25, 2026. Coverage, eligibility and remedies are set by the BLUETTI warranty policy, which restricts the limited warranty to the country of purchase.
BLUETTI's own manual, captured October 16, 2026 with the paced research fetcher (robots.txt read first). Manufacturer instructions, not independent tests.
Archived copies
Archived copy of a document published by BLUETTI. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-25.
Location: Warranty period table
Retrieved Sep 24, 2026
BLUETTI's own US warranty period table, listing a warranty term in months for each model, captured on September 25, 2026. It states the term only; coverage, eligibility and remedies are set by the BLUETTI warranty policy page, and the policy notes that terms may vary by country.
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-25.
Location: Product page
Retrieved Sep 24, 2026
BLUETTI's own US store page for this product, captured on September 25, 2026. It publishes the manufacturer's own specification figures and marketing claims; it is not an independent test and does not establish certification by any issuer.
Archived copy of a document published by BLUETTI. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
Elite 300
Manufacturer SKU EL300-US-GY-ID-SPFUS-00
No historical observations recorded yet.
Other recorded fields
Field
Value
Conditions
Source
Evidence breakdown
method version: 0.21-personal
documented pct: 40
basis: nominal
missing:
Certificates evidence needed
Warranty energy disclosure evidence needed
Cell model disclosure evidence needed
criteria:
key: certificateEvidence
label: Certificates
value: 0
unit: evidence points
shown: Research pending
shown detail: Unknown
state: pending
points: 0
ceiling: 45
weight: 45
share: 0
covered: no
missing: yes
folded: yes
reason: Unknown
reason text: Unknown
note: No qualifying applicable evidence recorded. This is not proof that certification is absent. Applies: UL 2743; UL 1973; CEC not applicable to portable power stations; UL 9540 not applicable to portable power stations.