locator: Product page store payload: sku for the "STREAM Ultra" option
conditions: Stock keeping unit published in the store payload of the US EcoFlow product page for the bare STREAM Ultra option. Bundles that add the STREAM Microinverter or rigid panels carry different stock keeping units.
Printed as "Cell Chemistry LFP LFP (LiFePO₄)" in EcoFlow's US user manual for the STREAM Ultra (120V~ 60Hz edition, model EF-EA-HD-U2K-1K2U), linked from manuals.ecoflow.com/us, captured on October 13, 2026.
Grounding Terminal: Used for providing a supplemental ground connection.
Printed as "3 Grounding Terminal Used for providing a supplemental ground connection." in EcoFlow's FAQ Eco Flo w App Afte r- sale s Poli cy Co mm unit y About This Manual Applicable Product Model: EcoFlow STREAM Ultra This manual contains (PDF page 3). The manual applies to this model: User Manual "Applicable Product Model: EcoFlow STREAM Ultra" (US file on the EcoFlow service host).
The page states the unit plugs directly into AC sockets designated NEMA 5-15 or NEMA 5-20, and repeats those designations where it describes expanding capacity by plugging in further units. Which cable ships in the box is not stated.
Where: Body copy on grid-tied AC output and on scalable capacity
Printed as "Net. Weight 23.1 ±0.5kg" in EcoFlow's US user manual for the STREAM Ultra (120V~ 60Hz edition, model EF-EA-HD-U2K-1K2U), linked from manuals.ecoflow.com/us, captured on October 13, 2026. The manual prints a tolerance of ±0.5 kg.
Where: User manual, Technical Specification, General Info, Net. Weight (PDF page 56)
Printed as "Cycle Life¹ 6000"; "Test conditions: 0.5C/0.5C charge/discharge at 25°C (77°F)." in EcoFlow's US user manual for the STREAM Ultra (120V~ 60Hz edition, model EF-EA-HD-U2K-1K2U), linked from manuals.ecoflow.com/us, captured on October 13, 2026. The manual footnotes the figure: "Test conditions: 0.5C/0.5C charge/discharge at 25°C (77°F)."
Where: User manual, Technical Specification, Battery Info, Cycle Life (PDF page 57) and its footnote (PDF page 60)
Printed as "Number of MPPTs 4" in EcoFlow's US user manual for the STREAM Ultra (120V~ 60Hz edition, model EF-EA-HD-U2K-1K2U), linked from manuals.ecoflow.com/us, captured on October 13, 2026.
Where: User manual, Technical Specification, PV Terminal (DC), Number of MPPTs (PDF page 57)
A PV switch must be installed; current rating > 14A; circuit breaker compliant with ANSI/UL 489B or disconnect switch compliant with UL 508
Printed as "A PV switch must be installed for the PV connection to comply with local regulations. The following specifications are recommended: - Specifications: Current rating > 14A - Certification Requirements: Use a circuit breaker compliant with ANSI/UL 489B or a disconnect switch compliant with UL 508." in EcoFlow's FAQ Eco Flo w App Afte r- sale s Poli cy Co mm unit y About This Manual Applicable Product Model: EcoFlow STREAM Ultra This manual contains (PDF page 17). The manual applies to this model: User Manual "Applicable Product Model: EcoFlow STREAM Ultra" (US file on the EcoFlow service host).
Printed as "Max. Input Power 2000W (500W per MPPT)" in EcoFlow's US user manual for the STREAM Ultra (120V~ 60Hz edition, model EF-EA-HD-U2K-1K2U), linked from manuals.ecoflow.com/us, captured on October 13, 2026.
Where: User manual, Technical Specification, PV Terminal (DC), Max. Input Power (PDF page 57)
Printed as "Communication WLAN, Bluetooth" in EcoFlow's US user manual for the STREAM Ultra (120V~ 60Hz edition, model EF-EA-HD-U2K-1K2U), linked from manuals.ecoflow.com/us, captured on October 13, 2026.
Where: User manual, Technical Specification, Features, Communication (PDF page 59)
Printed as "IP Rating NEMA 4" in EcoFlow's US user manual for the STREAM Ultra (120V~ 60Hz edition, model EF-EA-HD-U2K-1K2U), linked from manuals.ecoflow.com/us, captured on October 13, 2026. The row headed "IP Rating" prints a NEMA enclosure type, not an IP code.
Where: User manual, Technical Specification, General Info, IP Rating (PDF page 56)
Printed as "Capacity 1.92kWh" in EcoFlow STREAM Ultra product page, STREAM Ultra Specs table, Capacity row. Revised on 1 October 2026: EcoFlow prints 1.92 kWh for one STREAM Ultra unit; 1920 Wh is the same figure in watt-hours.
EcoFlow documents disagree. EcoFlow's US user manual prints "Max. Output Power 800W" for the AC Outlet (AC); EcoFlow's US product page says the dual AC outlets automatically boost output to 1,200W. Neither document says which supersedes the other.
Printed as "AC Outlet (AC) Rated Voltage and Frequency 120V~, 60Hz Max. Output Power 800W" in EcoFlow's STREAM Ultra User Manual (the US 120V~ 60Hz edition linked from manuals.ecoflow.com/us), Technical Specification, captured on September 26, 2026. The same table prints "Max. Output Power 1200W" for the separate Parallel Terminal (AC). Revised on 13 October 2026: this field held 1,200 W from the US product page ("Dual AC outlets can power two appliances simultaneously, automatically boosting output to 1,200W"); the user manual, the primary source, prints 800 W for the AC outlets, so the manual's figure leads and the page's figure is kept beside it.
Where: User manual, Technical Specification, AC Outlet (AC), Max. Output Power (PDF page 58)
Sources
1,200 W
Printed as "Dual AC outlets can power two appliances simultaneously, automatically boosting output to 1,200W" in EcoFlow's US STREAM Ultra product page, read on September 20, 2026.
STREAM devices can be stacked to save space; avoid stacking more than two layers (securing brackets installed).
Printed as "Avoid stacking more than two layers." in EcoFlow's FAQ Eco Flo w App Afte r- sale s Poli cy Co mm unit y About This Manual Applicable Product Model: EcoFlow STREAM Ultra This manual contains (PDF page 11). The manual applies to this model: User Manual "Applicable Product Model: EcoFlow STREAM Ultra" (US file on the EcoFlow service host).
Published as Rated AC Output Power (Grid Terminal) 800 W at 120 V, 60 Hz and 6.67 A from the built-in grid-tied microinverter. The headline bullet "Max. 1200W On-Grid AC Output" describes a STREAM system of several units, not this unit alone.
Where: STREAM Ultra Specs table, Rated AC Output Power (Grid Terminal) row
Printed as "Operating Temperature² –20°C to 55°C"; "The performance may be derated at temperatures above 35℃." in EcoFlow's US user manual for the STREAM Ultra (120V~ 60Hz edition, model EF-EA-HD-U2K-1K2U), linked from manuals.ecoflow.com/us, captured on October 13, 2026. The manual footnotes that performance may be derated above 35°C.
Where: User manual, Technical Specification, Environment, Operating Temperature (PDF page 59) and its footnote (PDF page 60)
My setup is:
2x Ecoflow Stream Ultra connected via paralel cable
Ecoflow Smart Meter
Ecoflow Microinverter 800W connected to first Stream Ultra
EU 230V version
2x Trina Solar 450W connected to first Stream Ultra's MPPT
2x Trina Solar 450W connected to Stream microinverter
Zero feed-in is enabled in the app
Microinverter is connected to AC1 port of first (primary) Stream Ultra that is connected to the grid, on AC2 wifi router, couple of cameras and two lamps are connected (total of aprox. 35W up to 80W when the lamps are ON), nothing is connected to the second Stream Ultra, he is only connected to the first one via Ecoflow paralel cable.
The system is basically OK, but I have a couple of issues.
The main issue is that zero feed-in is not 100% which can cause my electricity meter to trip and disconnect.
1. Case: The Stream Ultra can throttle down it's mppt's when it reaches it's set battery SOC max limit (either 95% or 100%, I tried changing it couple of times) but it can not throttle down the microinverter that is connected to the first Stream Ultra's AC1 port.
At that point, when it reaches, let's say 100% state of charge MPPT'S are turned off, and no solar is comming in, but the microinverter is still producing power and that power is beeing fed to the grid (photo1,2,3).
2. Case: when the microinverter is producing around 100W or less, the system misbehaves and starts showing that Microinverter is producing 170W, then 60W, then 100W and the power value changes every second and it's all over the place and also start's to export power to the grid. Don't have screenshot from the app unfortunately.
When real production is above 100-150W or higher, everything is ok.
3. Case: when for instance a 450W heater, that is connected to the house is turned on, and the smart meter senses that 450W is needed and tells the Stream Ultra put out 450W to the house grid that is ok, a 3-4 second delay is visible untill the Stream Ultra starts feeding that to the house, but when that same heater is turnd off and 450W is not needed any more that same delay of 4 or even more seconds happens and the Stream Ultra is still producing 450W power and feeding it to the house and basically feeding it back to the grid.
I understand that some small delay is expected, but 4 or more seconds is enough to trip the power meter. Smart Meter and Stream Ultra should be communicating directly with one another, as it shows in the app when you add and pair the devices, but it seems that it isn't the case. My guess is they communicate through the cloud which causes that long delay and high latency.
One note, they are all connected to a stable 2.4GHz wifi
this was easy to set up and use.
I added it to better control my stream micro inverter. It acts as a gateway and has some battery storage.
Biggest gripe is small battery storage and no easy way for just a battery addition
for net zero output you will need a power meter I am using a shelly 3em pro 120 for this as that was the only one compatible at the time I purchased
unit will output up to 800 wats solo or you can pair it with another for full 1200 or with the ecoflow micro inverter.
with the unit acting as a gate way you have two options for self consumption one is to set a manual base load number or you can use a smart meter for auto adjusting. it does have the option for ac coupling but my experience that isn't super efficient because it can only couple the excess solar if you are not consuming the full output amount.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
Unknown: no certification evidence recorded in this data.
Warranty
Field
Value
Conditions
Source
Warranty term
10 years
Published as a 10-Year term in the specification table and repeated in the bullet list. Coverage, eligibility and remedies are set by the EcoFlow warranty policy and are not on this page.
EcoFlow's own manual, captured October 15, 2026 with the paced research fetcher (robots.txt read first). Manufacturer instructions, not independent tests.
Archived copies
Archived copy of a document published by EcoFlow. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Footnote 1 separates the standalone on-grid output from the output of a multi-unit STREAM system.
Location: STREAM Ultra Specs table, product bullet list, body copy and numbered footnotes
Retrieved Sep 20, 2026
Manufacturer product page read on 20 September 2026. It establishes what EcoFlow publishes for this model on that date and nothing about measured output, stock, installed performance or third-party test results.
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
EcoFlow STREAM Ultra_User Manual
Archived copy of a document published by EcoFlow. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.