Charged Reviews · Quick reference
Silfab Solar SIL 440 QD DCA2
- Brand
- Silfab Solar
- Model
- SIL 440 QD DCA2
- SKU / part number
- SIL 440 QD DCA2 Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/silfab-solar-sil-440-qd-dca2
Electrical at STC
Temperature and system limits
Cells and construction
- Cell technology
- N-Type Provisional [1]
- Cell count
- ?
- Bifacial
- ?
- Bifaciality
- ?
- Frame
- Anodized aluminum (Black) [4]
- Front glass
- 3.2 mm high transmittance, tempered, antireflective coating [4]
- Back cover
- High durability, superior hydrolysis and UV resistance, multi-layer dielectric film, fluorine-free PV backsheet [4]
- Panel format
- ?
Mechanical and connections
Installation (from the manual)
Conductors
- Cable bending radius / connector notes
- Cable bending radius should be at least 60 mm (2 3/8”). [3]
Clearances and orientation
- Mounting methods and clamp zones
- Clamp Long Edge Primary 275.5 - 350.5 +3600 / -2667 +5400 / -4000; Clamp Long Edge Secondary 150.5 - 275.5 +2667 / -2400 +4000 / -3600; Clamp Long Edge Three Rails 150.5 - 350.5 and red zone +3600 / -3600 +5400 / -5400; Clamp Short Edge 200 - 250 +1600 / -1600 +2400 / -2400; M6 or 1/4” corrosion-resistant bolts, nuts, and a locking feature are required; are permitted for the following Silfab Solar product lines: SIL-XXX BK/BG/HC/HC+/QD/HN/HM/QM/XM/ XM+/XL. [3]
Grounding
- Grounding
- A UL listed grounding lug can be bonded to the grounding hole located on the bottom flange of Silfab Solar’s module frame.; The grounding lug should be attached to the frame grounding hole using stainless steel hardware (bolt, serrated flange nut, toothed lock washer, KEPS nut, etc).; Silfab Solar modules may be bonded to a racking or rail system using an integrated grounding method certified to UL 2703. [3]
Not in the manual: Torque