Printed as "Frame Anodized aluminum (Black)" in Silfab Prime – SIL-440 QD (NTC) datasheet, captured on September 28, 2026. The domestic-content suffix on this catalog model is a sourcing declaration, not a separate construction; the datasheet names the same base model.
A UL listed grounding lug can be bonded to the grounding hole located on the bottom flange of Silfab Solar’s module frame.; The grounding lug should be attached to the frame grounding hole using stainless steel hardware (bolt, serrated flange nut, toothed lock washer, KEPS nut, etc).; Silfab Solar modules may be bonded to a racking or rail system using an integrated grounding method certified to UL 2703.
Printed as "A UL listed grounding lug can be bonded to the grounding hole located on the bottom flange of Silfab Solar’s module frame." under Option A in Silfab Solar's Safety and Installation Manual for Photovoltaic Modules (MAN-SSI-13, April 29, 2026), section 9.3 Protective Grounding; Option B allows an integrated grounding method certified to UL 2703. Instruction for all Silfab Solar modules the manual covers.
Where: PDF page 20, section 9.3 Protective Grounding, Option A and Option B
Printed as "Weight 46.3 Lbs." in the Silfab Solar Domestic 440W 108 Half-Cell 1000V BLK/BLK Solar Panel, SIL 440 QD DCA2; the maker prints pounds only, converted to kilograms. Revised on 30 September 2026: The maker prints this weight in pounds only; the stored kilograms were an unlabeled conversion, now labeled with the printed pounds kept (Project Manager, September 30, 2026).
3.2 mm high transmittance, tempered, antireflective coating
Printed as "Glass 3.2 mm high transmittance, tempered, antireflective coating" in Silfab Prime – SIL-440 QD (NTC) datasheet, captured on September 28, 2026. The domestic-content suffix on this catalog model is a sourcing declaration, not a separate construction; the datasheet names the same base model.
High durability, superior hydrolysis and UV resistance, multi-layer dielectric film, fluorine-free PV backsheet
Printed as "Backsheet High durability, superior hydrolysis and UV resistance, multi-layer dielectric film, fluorine-free PV backsheet" in Silfab Prime – SIL-440 QD (NTC) datasheet, captured on September 28, 2026. The domestic-content suffix on this catalog model is a sourcing declaration, not a separate construction; the datasheet names the same base model.
Clamp Long Edge Primary 275.5 - 350.5 +3600 / -2667 +5400 / -4000; Clamp Long Edge Secondary 150.5 - 275.5 +2667 / -2400 +4000 / -3600; Clamp Long Edge Three Rails 150.5 - 350.5 and red zone +3600 / -3600 +5400 / -5400; Clamp Short Edge 200 - 250 +1600 / -1600 +2400 / -2400; M6 or 1/4” corrosion-resistant bolts, nuts, and a locking feature are required; are permitted for the following Silfab Solar product lines: SIL-XXX BK/BG/HC/HC+/QD/HN/HM/QM/XM/ XM+/XL.
Printed as "RAIL MOUNTING FOR SIL QD" (table heading) with the first row printed as "Clamp Long Edge Primary 275.5 - 350.5 +3600 / -2667 +5400 / -4000" on PDF page 10 of Silfab Solar's Safety and Installation Manual for Photovoltaic Modules (MAN-SSI-13, April 29, 2026): each listed line is one printed table row or table (mounting type, mounting position, mounting zone in millimeters, design load rating and test load rating in pascals; positive values downward, negative values uplift). The manual prints both design and test loads and they differ by mounting method, so no single front or rear design load is recorded for this model. This page lists no mounting-hole row for SIL QD. Section 8.2 (PDF page 4) prints the bolt requirement for the factory mounting holes and section 8.3 (PDF page 5) permits rear flange-mounted clamps for the series lines it lists, including SIL-XXX QD.
Where: PDF page 10, mounting tables for SIL QD; PDF page 4 and 5, sections 8.2 and 8.3
Cable bending radius should be at least 60 mm (2 3/8”).
Printed as "Cable bending radius should be at least 60 mm (2 3/8”)." in Silfab Solar's Safety and Installation Manual for Photovoltaic Modules (MAN-SSI-13, April 29, 2026), section 9.1 Electrical Connection; section 7 Safety Precautions (PDF page 4) also says "maintaining a minimum bending radius of 60 mm (2 3/8”) at all locations along the cable." Instruction for all Silfab Solar modules the manual covers.
Where: PDF page 19, section 9.1 Electrical Connection; PDF page 4, section 7 Safety Precautions
Printed as "For SIL-XXX QD/QM/HM, the maximum series fuse rating is 25A." in Silfab Solar's Safety and Installation Manual for Photovoltaic Modules (MAN-SSI-13, April 29, 2026), section 9.1 Electrical Connection, the sentence that names this model's series. Series-level rating.
Where: PDF page 19, section 9.1 Electrical Connection
Printed as "For SIL-XXX BK/BG/HC/HC+/QD, the maximum system voltage rating is 1000V for TUV/IEC and 1000V for UL." in Silfab Solar's Safety and Installation Manual for Photovoltaic Modules (MAN-SSI-13, April 29, 2026), section 9.1 Electrical Connection, the sentence that names this model's series. The manual prints the same 1000V for the UL and the TUV/IEC rating. Re-cited on 1 October 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
Where: PDF page 19, section 9.1 Electrical Connection
Printed as "22.6%" in the cdn.myced.com manufacturer datasheet (PDF), Silfab data sheet, page 2, Electrical Specifications, Module efficiency (STC). Revised on 1 October 2026: The Silfab data sheet for this module prints a module efficiency of 22.6% at STC, matching the record, and a maker data sheet outranks the seller listing now cited.
Printed as "-0.29 %/°C" in the cdn.myced.com manufacturer datasheet (PDF), Silfab data sheet, page 2, Temperature Ratings, Temperature Coefficient Pmax. Revised on 1 October 2026: The Silfab data sheet for this module prints a Pmax temperature coefficient of -0.29 %/°C, matching the record, and a maker data sheet outranks the seller listing now cited.
Where: Silfab data sheet, page 2, Temperature Ratings, Temperature Coefficient Pmax
Printed as "Temperature Coefficient Voc -0.24 %/°C" in View. The datasheet is the model family's sheet this record already cites; it prints one Voc temperature coefficient for every model it lists.
Where: Specification table, temperature coefficients
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing for this product: Product warranty needed; Power warranty needed; First-year degradation needed; Weight / watt needed.
Each input is scored against the best documented value for a solar panel, and weight per watt against the best in the panel’s own format. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Certificates and unsupported claims do not add points.
Printed as "22.6%" in the cdn.myced.com manufacturer datasheet (PDF), Silfab data sheet, page 2, Electrical Specifications, Module efficiency (STC). Revised on 1 October 2026: The Silfab data sheet for this module prints a module efficiency of 22.6% at STC, matching the record, and a maker data sheet outranks the seller listing now cited.
Power temperature coefficient-0.29 %/°C12.1 / 16.0
0.29 against 0.22 %/°C, the lowest documented for a solar panel (printed by the maker): Jackery SolarSaga 100 Air
Printed as "-0.29 %/°C" in the cdn.myced.com manufacturer datasheet (PDF), Silfab data sheet, page 2, Temperature Ratings, Temperature Coefficient Pmax. Revised on 1 October 2026: The Silfab data sheet for this module prints a Pmax temperature coefficient of -0.29 %/°C, matching the record, and a maker data sheet outranks the seller listing now cited.
Silfab Solar publishes this instruction manual for SIL-530 XM, among other models named on the same document. Read from https://silfabsolar.com/resources-downloads/ on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Location: Document title as published
Retrieved Sep 19, 2026
Silfab Solar publishes this instruction manual for SIL-530 XM, among other models named on the same document. Read from https://silfabsolar.com/resources-downloads/ on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Archived copy of a document published by Silfab Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Silfab Solar publishes this datasheet for SIL-440 QD and names no other model in this catalog on it. Read from https://silfabsolar.com/resources-downloads/ on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Location: Document title as published
Retrieved Sep 19, 2026
Silfab Solar publishes this datasheet for SIL-440 QD and names no other model in this catalog on it. Read from https://silfabsolar.com/resources-downloads/ on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Archived copy of a document published by Silfab Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
PDF
ViewOfficial · cdn.myced.com · Official datasheet · PDFSource details
Revision
Not stated
Revision date
Not stated
Linked from the GreenTech Renewables product page with link text "View".
Location: ZZ301400049_DS.pdf
Retrieved Sep 18, 2026
Original PDF preserved byte for byte, found linked from the GreenTech Renewables listing https://www.greentechrenewables.com/product/silfab-solar-440w-108-half-cell-1000v-blkblk-solar-panel-sil-440-qd. The revision is whatever was published at this URL on the access date; exact variant coverage inside the document was not separately verified and no later revision was checked.
Archived copy of a document published by cdn.myced.com. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by cdn.myced.com. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by Silfab Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by Silfab Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].