SEG Solar SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell, family-wide mechanical/temperature value printed for every column on this sheet including SEG-440-BTD-BG.
Manufacturer source conflict. SEG's 2026 datasheet (SEG_DS_EN_2026V1.0) prints 13.2 and its 2025 datasheet prints 13.46 for the SEG-440-BTD-BG maximum power current.
Printed as "13.20 10.77 14.63" in SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet, Page 2, Electrical Characteristics, SEG-440-BTD-BG STC column. Revised on 1 October 2026: SEG's current datasheet (SEG_DS_EN_2026V1.0) prints 13.2 A for the maximum power current of SEG-440-BTD-BG; the stored 13.46 comes from SEG's earlier 2025 datasheet via a seller page.
Manufacturer source conflict. SEG's 2026 datasheet (SEG_DS_EN_2026V1.0) prints 13.92 and its 2025 datasheet prints 14.15 for the SEG-440-BTD-BG short circuit current.
Printed as "13.92 11.33 15.42" in SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet, Page 2, Electrical Characteristics, SEG-440-BTD-BG STC column. Revised on 1 October 2026: SEG's current datasheet (SEG_DS_EN_2026V1.0) prints 13.92 A for the short circuit current of SEG-440-BTD-BG; the stored 14.15 comes from SEG's earlier 2025 datasheet via a seller page.
Manufacturer source conflict. SEG's 2026 datasheet (SEG_DS_EN_2026V1.0) prints 33.32 and its 2025 datasheet prints 32.7 for the SEG-440-BTD-BG maximum power voltage.
Printed as "33.32 30.83 33.32" in SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet, Page 2, Electrical Characteristics, SEG-440-BTD-BG STC column. Revised on 1 October 2026: SEG's current datasheet (SEG_DS_EN_2026V1.0) prints 33.32 V for the maximum power voltage of SEG-440-BTD-BG; the stored 32.7 comes from SEG's earlier 2025 datasheet via a seller page.
Manufacturer source conflict. SEG's 2026 datasheet (SEG_DS_EN_2026V1.0) prints 39.28 and its 2025 datasheet prints 39.3 for the SEG-440-BTD-BG open circuit voltage.
Printed as "39.28 37.41 39.28" in SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet, Page 2, Electrical Characteristics, SEG-440-BTD-BG STC column. Revised on 1 October 2026: SEG's current datasheet (SEG_DS_EN_2026V1.0) prints 39.28 V for the open circuit voltage of SEG-440-BTD-BG; the stored 39.3 comes from SEG's earlier 2025 datasheet via a seller page.
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. The datasheet names the series "Half-Cell N-Type Bifacial Module" and prints "Bifaciality 80±10%" and BNPI (bifacial nameplate irradiance) figures for every column. Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
Where: SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0), page 2, page 1 heading and Electrical Characteristics, "Bifaciality" row
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. Mechanical Specifications, "Solar Cells" row, printed for the whole series: "N-Type Mono-crystalline". Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
Where: SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0), page 2, Mechanical Specifications, "Solar Cells" row
A bonding or toothed washer is required to make proper and reliable electrical grounding connection with the anodized aluminum frame.; Consider using a lay-in lug, rated for outdoor use, if the module grounding conductor is to be larger than 10 AWG.
Printed as "A bonding or toothed washer is required to make proper and reliable electrical grounding connection with the anodized aluminum frame." in section 3.8 (Grounding) of SEG's Installation Guide, Photovoltaic Module (Double-glass), 2026 V1.1, with the lay-in lug sentence from the same section. The section also allows devices listed and identified for grounding metallic module frames.
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. Mechanical Specifications, "External Dimension" and "Weight" rows, printed for the whole series: "1722 x 1134 x 30 mm 24.0 kg"; weight 24.0 kg. Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (cdn.myced.com), which stays listed as an additional source.
Where: SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0), page 2, Mechanical Specifications, "Weight" row
SEG Solar SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell, family-wide mechanical/temperature value printed for every column on this sheet including SEG-440-BTD-BG.
SEG Solar SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell, family-wide mechanical/temperature value printed for every column on this sheet including SEG-440-BTD-BG.
Printed as "Front Glass 2.0 mm AR coating heat strengthened glass" in SEG Solar's Yukon N Series SEG-XXX-BTD-BG-108Cells datasheet (SEG_DS_EN_2025V2.0), captured on September 28, 2026. Confirmed by rendering page 2 and reading the image because the table's labels and values are laid out in separate runs in the extracted text.
Where: Datasheet page 2, Mechanical Specifications, Front Glass row
Printed as "The reference torque value for M8 screw is 16~20N*M." in section 3.4 (Clamp Installation) of SEG's Installation Guide, Photovoltaic Module (Double-glass), 2026 V1.1; section 3.3 (Screw Installation) prints the same M8 value and 9~12N*M for M6 screws.
SEG Solar SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell, family-wide mechanical/temperature value printed for every column on this sheet including SEG-440-BTD-BG.
SEG Solar SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell, family-wide mechanical/temperature value printed for every column on this sheet including SEG-440-BTD-BG.
Printed as "Back Glass 2.0 mm heat strengthened glass" in SEG Solar's Yukon N Series SEG-XXX-BTD-BG-108Cells datasheet (SEG_DS_EN_2025V2.0), captured on September 28, 2026. Confirmed by rendering page 2 and reading the image because the table's labels and values are laid out in separate runs in the extracted text.
Where: Datasheet page 2, Mechanical Specifications, Back Glass row
W 1,134 × L 1,722 × D 30 mm / W 44.65 × L 67.8 × D 1.2 in converted
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. Mechanical Specifications, "External Dimension" and "Weight" rows, printed for the whole series: "1722 x 1134 x 30 mm 24.0 kg"; 1722 x 1134 x 30 mm. Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
Where: SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0), page 2, Mechanical Specifications, "External Dimension" row
SEG Solar SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell, family-wide mechanical/temperature value printed for every column on this sheet including SEG-440-BTD-BG.
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. STC sub-column in row order Pmax, Voc, Isc, Vmp, Imp: "440 39.28 13.92 33.32 13.20"; Maximum Power -Pmp(Wp): 440 W. STC: irradiance 1000 W/m², module temperature 25°C, AM=1.5; measuring tolerance ±3%. Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
Where: SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0), page 2, Electrical Characteristics, SEG-440-BTD-BG column, STC sub-column, "Maximum Power -Pmp(Wp)" row
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. Printed once for every column: "Maximum System Voltage Maximum Series Fuse Rating (0, +4.99) 1500V DC 30 A". Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
Where: SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0), page 2, "Maximum Series Fuse Rating" row
Screw installation (Table 2): Four outer mounting holes, +5400/-2400 Pa; Clamp installation (Table 3), clamp length ≥50mm, Mounting rail cross the long side, L=A/4±50mm: +5400/-2400 Pa; Clamp installation (Table 3), clamp length ≥50mm, Mounting rail parallel the long side, L=A/4±50mm: +2400/-2400 Pa; Clamp installation (Table 3), clamp length ≥50mm, Mounting rail cross the short side, W=B/4±50mm: +3600/-2400 Pa; Clamp installation (Table 3), clamp length ≥50mm, Mounting rail parallel the short side, W=B/4±50mm: +1600/-1600 Pa
Printed as "SEG-XXX-BMD-BG(1722×1134×30/35) SEG-XXX-BTD-BG(1722×1134×30/35) +5400/-2400 Four outer mounting holes" in Table 2 of SEG's Installation Guide, Photovoltaic Module (Double-glass), 2026 V1.1, with the clamp row quoted here from Table 3 (columns Installation Drawing 1 to 4) and any tracker or special-method row for this series. The hole position for Table 2 was read from rendered page 8 (the table's installation drawing labels). Loads are in Pa as printed; the manual does not say whether they are test or design loads.
Where: PDF page 8 (Table 2, screw installation), PDF page 10 (Table 3, clamp installation)
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. Printed once for every column: "Maximum System Voltage Maximum Series Fuse Rating (0, +4.99) 1500V DC 30 A". Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
Where: SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0), page 2, "Maximum System Voltage" row
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. The "Module Efficiency(%)" row prints 22.53 under the SEG-440-BTD-BG column (column 4; the text layer lists the row's figures out of column order, and the column was read from the printed positions). Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
Where: SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0), page 2, Electrical Characteristics, SEG-440-BTD-BG column, "Module Efficiency(%)" row
SEG Solar SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell, family-wide mechanical/temperature value printed for every column on this sheet including SEG-440-BTD-BG.
Where: Page 2, Temperature Characteristics, "Operating Temperature"
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. Temperature Characteristics table, printed for the whole series; its rows Pmax, Voc and Isc temperature coefficient and operating temperature read "-0.30 %/°C -0.25 %/°C +0.046 %/°C -40~+85 °C". Pmax temperature coefficient: -0.30 %/°C. Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
Where: SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0), page 2, Temperature Characteristics, "Pmax Temperature Coefficient" row
SEG Solar SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell, family-wide mechanical/temperature value printed for every column on this sheet including SEG-440-BTD-BG.
Where: Page 2, Temperature Characteristics, "Isc Temperature Coefficient"
SEG Solar SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell, family-wide mechanical/temperature value printed for every column on this sheet including SEG-440-BTD-BG.
Where: Page 2, Temperature Characteristics, "Voc Temperature Coefficient"
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing for this product: First-year degradation needed.
Each input is scored against the best documented value for a solar panel, and weight per watt against the best in the panel’s own format. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Certificates and unsupported claims do not add points.
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. The "Module Efficiency(%)" row prints 22.53 under the SEG-440-BTD-BG column (column 4; the text layer lists the row's figures out of column order, and the column was read from the printed positions). Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
0.3 against 0.22 %/°C, the lowest documented for a solar panel (printed by the maker): Jackery SolarSaga 100 Air
Read from the SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet (SEG_DS_EN_2026V1.0) hosted on segsolar.com, page 2; the Electrical Characteristics table prints SEG-440-BTD-BG as column 4 of its Module Type row, with STC, NOCT and BNPI sub-columns. Temperature Characteristics table, printed for the whole series; its rows Pmax, Voc and Isc temperature coefficient and operating temperature read "-0.30 %/°C -0.25 %/°C +0.046 %/°C -40~+85 °C". Pmax temperature coefficient: -0.30 %/°C. Re-cited on 25 September 2026 to the manufacturer's own document; previously cited to Greentech Renewables (greentechrenewables.com), which stays listed as an additional source.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
StandardEvidenceStatusSource
CECauthority listing reportedlisted as of snapshot[5]
Scope
equipment listing
Covered models
SEG-440-BTD-BG
Limitations
Model SEG-440-BTD-BG listed on the California Energy Commission PV Module List (data unchanged since October 1, 2026; downloaded October 11, 2026) under SEG Solar Inc., as "SEG-440-BTD-BG", CEC listing date 2025-05-21. This is an equipment listing, not UL certification or complete-system approval.
Location: Cover page (version) and section 1.1, Applicable Products (scope)
Retrieved Oct 1, 2026
SEG Solar's own installation guide for its double-glass modules, captured 1 October 2026 from segsolar.com, where SEG's Installation Manual download page links it; printed as 2026 V1.1, valid from March 2026, and it states the modules are certified for safety through UL 61730. Section 1.1 (Applicable Products) lists the series it covers by type and size. It gives series-level mounting methods with loads, torques and grounding instructions; it prints no model ratings. Manufacturer instructions, not independent tests.
Archived copies
Archived copy of a document published by SEG Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Covers the full-black Yukon N SEG-425 to SEG-445-BTD-BG 108-cell N-type bifacial family only; it does not name any T1/T2/T3 suffixed part number or the 420 W class.
Archived copies
Archived copy of a document published by SEG Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
ViewOfficial · cdn.myced.com · Official datasheet · PDFSource details
Revision
Not stated
Revision date
Not stated
Linked from the GreenTech Renewables product page with link text "View".
Location: ZZ309800018_DS.pdf
Retrieved Sep 18, 2026
Original PDF preserved byte for byte, found linked from the GreenTech Renewables listing https://www.greentechrenewables.com/product/seg-solar-440w-108-half-cell-1500v-n-type-black-bifacial-solar-panel-seg-440-btd-bg. The revision is whatever was published at this URL on the access date; exact variant coverage inside the document was not separately verified and no later revision was checked.
Archived copy of a document published by cdn.myced.com. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by cdn.myced.com. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
SEG Solar Yukon N SEG-XXX-BTD-BG 108-cell datasheet
Archived copy of a document published by SEG Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
SEG Solar Installation Guide, Photovoltaic Module (Double-glass) (U.S. UL 61730 edition, 2026 V1.1)
Archived copy of a document published by SEG Solar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
SEG-440-BTD-BG
Manufacturer SKU SEG-440-BTD-BG
Observed Oct 11, 2026
CEC: claimed
Product / system scope unresolved. Model SEG-440-BTD-BG listed on the California Energy Commission PV Module List (data unchanged since October 1, 2026; downloaded October 11, 2026) under SEG Solar Inc., as "SEG-440-BTD-BG", CEC listing date 2025-05-21. This is an equipment listing, not UL certification or complete-system approval.