Charged Reviews · Quick reference
Panasonic N325 Photovoltaic Module HIT®, 40mm
- Brand
- Panasonic
- Model
- VBHN325SA17
- SKU / part number
- ?
- Category
- Solar panels
chargedreviews.com/panels/panasonic-vbhn325sa17
Electrical at STC
- Module efficiency
- 19.4 % [2]
- Power tolerance
- ?
Temperature and system limits
Cells and construction
- Cell technology
- Silicon hetero-junction [1]
- Bifacial
- ?
- Bifaciality
- ?
- Frame
- ?
- Front glass
- ?
- Back cover
- ?
- Panel format
- ?
Mechanical and connections
- Connectors
- Multi-Contact® Type IV (MC4™) [2]
- Cable length
- ?
- Junction box rating
- ?
- Mounting
- ?
- Design load, front
- ?
- Design load, rear
- ?
Installation (from the manual)
Torque
- Clamp or bolt torque
- 10 ft-lb [1]
Conductors
- Cable bending radius / connector notes
- make sure the curvature of the cable is R50 mm or more. [1]
Clearances and orientation
- Mounting methods and clamp zones
- The modules should be mounted at the four (4) quarter points by the means shown in Figure 1.; 1) Positive load with Long frame mounting ・ 33 psf (0-450mm range from edge ・ 75 psf (230-380mm range from edge); 2) Negative load with Long frame mounting ・ 33 psf (0-450mm range from edge ・ 61 psf(230-380mm range from edge) ・ 75 psf (230-345mm range from edge); 3) Positive load with Short frame mounting ・ 33 psf (0-250mm range from edge); 4) Negative load with Short frame mounting ・ 33 psf (0-250mm range from edge) [1]
Grounding
- Grounding
- Each ledge on the module frame has two larger holes for bolts (0.205’‘diameter (5.2 mm)).; Star washers must be used to make contact through the anodization of the module for this method.; Recommended torque value in tightening bolt and nut is 2.3 N.m (20in-lb).; Use Tyco Electronics 1954381-2 as grounding clip. [1]