Charged Reviews · Quick reference
LONGi Solar HIMO5 DC LR5-54HPB 415
- Brand
- LONGi Solar
- Model
- HIMO5 DC LR5-54HPB 415
- SKU / part number
- HIMO5 DC LR5-54HPB 415 Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/longi-solar-himo5-dc-lr5-54hpb-415
Electrical at STC
Temperature and system limits
Cells and construction
- Cell technology
- Monocrystalline Provisional [1]
- Cell count
- ?
- Bifacial
- ?
- Bifaciality
- ?
- Frame
- ?
- Front glass
- ?
- Back cover
- ?
- Panel format
- ?
Mechanical and connections
- Dimensions
- W 1,134 × L 1,722 × D 30 mm / W 44.65 × L 67.8 × D 1.2 in converted Provisional [1]
- Weight
- ?
- Connectors
- ?
- Cable length
- ?
- Junction box rating
- ?
- Mounting
- ?
- Design load, front
- ?
- Design load, rear
- ?
Installation (from the manual)
Torque
- Clamp or bolt torque
- 12 to 16 N·m [2]
Conductors
- Cable bending radius / connector notes
- The minimum allowed bending radius of cables should be 43mm. (1.69 inch) [2]
Clearances and orientation
- Mounting methods and clamp zones
- Bolts Mounting, mounting rails cross the long frame: Outer Four-hole (Method ①) ±2400 Pa; Inner Four-hole (Method ②) +5400,-2400 Pa; Clamps Mounting, mounting rails cross the long frame (Method ③): 250≤D≤350 +5400,-2400 Pa; 350≤D≤450, 450≤D≤550 and 500≤D≤600 not given (/); Clamps Mounting, mounting rails cross the short frame, 150≤E≤250 (Method ④): ±2400 Pa; Clamps are mounted at the corners of short frame (Method ⑤): +2400,-1800 Pa [2]
Grounding
- Grounding
- There are grounding holes with the diameter of Ø4.2 mm at the edge location of module's back-side frame.; The copper core wire used for the grounding clamp is recommended to be 12 AWG.; Align grounding clamp to the frame mounting hole. Use grounding bolt to go through the grounding clamp and frame.; Put the tooth side of the washer on the other side and fasten the nuts. [2]