Charged Reviews · Quick reference
CW Energy 450W
- Brand
- CW Energy
- Model
- CWT450-108TNFB10
- SKU / part number
- CWT450-108TNFB10 [1]
- Category
- Solar panels
chargedreviews.com/panels/cw-energy-450w-cwt450-108tnfb10
Electrical at STC
Temperature and system limits
- Temperature coefficient, Pmax
- ?
- Temperature coefficient, Voc
- ?
- Temperature coefficient, Isc
- ?
- Maximum system voltage
- ?
- Maximum series fuse
- ?
- NOCT / NMOT
- ?
- Rated output at NMOT
- ?
- Operating temperature
- ?
Cells and construction
Mechanical and connections
- Weight
- 21.45 kg / 47.29 lb converted [1]
- Connectors
- ?
- Cable length
- ?
- Junction box rating
- ?
- Mounting
- ?
- Design load, front
- ?
- Design load, rear
- ?
Installation (from the manual)
Torque
- Clamp or bolt torque
- 12 to 16 N·m [2]
Clearances and orientation
- Mounting methods and clamp zones
- Modules can be installed on the frame using mounting holes, clamps, or an insertion system.; Width: Clamp A no less than 38mm, Clamp B no less than 50mm; Bolt: M8; L2-L1: 300-400 mm; Figure 4 layouts: STATIC LOAD +2400Pa/-2400Pa, +5400Pa/-2400Pa, +3600Pa/-2400Pa, +2400Pa/-2400Pa [2]
Grounding
- Grounding
- The frame rails have pre-drilled holes marked with a bonding sign. These holes should be used for bonding purposes and must not be used for mounting the Modules.; There is a bonding hole with 4.2 mm diameter on the edge side closer to the middle of the back frame of the Modules.; The recommended twist torque value is 2.3 N.m.; The recommended torque of locking the nut is 2.0 Nm-2.2 Nm. [2]
Not in the manual: Conductors