Printed as "Weight 42kG" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, "Weight" row, HESP4860U140-HJP column
Printed as "No. of MPPT Trackers 2" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, PV Input, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, PV Input, "No. of MPPT Trackers" row, HESP4860U140-HJP column
Printed as "Max. Peak Power 2× rated power for 10 seconds" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, specification table, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP and HESP4860U140-HJP columns, captured on September 25, 2026.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, specification table, "Max. Peak Power" row, HESP4860U140-HJP column
Read from SRNE's published document at https://www.srnesolar.com/productdetail/Hybrid-Inverter-HESP-4-6kW-JP.html, from a table or row headed by model HESP4860U140-HJP. Printed: "100/200Vac (Split-phase); 100/173V (Three-phase)". Conditions as stated in that document. No value was taken from another model or from a product name.
Read from SRNE's published document at https://www.srnesolar.com/productdetail/Hybrid-Inverter-HESP-4-6kW-JP.html, from a table or row headed by model HESP4860U140-HJP. Printed: "50/60Hz". Conditions as stated in that document. No value was taken from another model or from a product name.
Printed as "Max. Hybrid Charging Curren 140A" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), chapter 9, captured on September 26, 2026. Value for this model.
Printed as "PV1-1 4mm²/ 12 AWG 16A 4P-25A" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), section 4.2, PV Input table, captured on September 26, 2026.
400 × 760 × 250 mm / 15.7 × 29.9 × 9.84 in converted
Printed as "Dimension 400x760x250mm" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026. The datasheet does not name the axes; the three figures are kept in printed order.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, "Dimension" row, HESP4860U140-HJP column
Printed as "Communication Interface RS485 / CAN / USB / Dry contact" and "External Modules Wi-Fi / GPRS (Optional)", shared across all four models; confirmed against the table's rendered page image.
Where: Section 9 Datasheet, General Data, "Communication Interface" and "External Modules" rows
Printed as "Max. Efficiency 97.6%" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, Efficiency, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026. Manufacturer rating; the datasheet does not state test conditions.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, Efficiency, "Max. Efficiency" row, HESP4860U140-HJP column
Printed as "MPPT Operating Voltage Range 120~500Vdc" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, PV Input, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, PV Input, "MPPT Operating Voltage Range" row, HESP4860U140-HJP column
Printed as "Max. PV Input Power 6000W/6000W" (one figure per MPPT tracker, 2 trackers), shared across all four models; confirmed against the table's rendered page image.
Printed as "Rated Frequency 50/60Hz" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), chapter 9, captured on September 26, 2026.
Read from SRNE's published document at https://www.srnesolar.com/productdetail/Hybrid-Inverter-HESP-4-6kW-JP.html, from a table or row headed by model HESP4860U140-HJP. Printed: "140A". Conditions as stated in that document. No value was taken from another model or from a product name.
Printed as "Max. Discharging Current 140A" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), chapter 9, captured on September 26, 2026. Value for this model.
Printed as "Waveform Pure sine wave" in the maker's document "SRNE HESP-HJP series 48V 4-6.5kW 100&200V Split-Phase Hybrid Solar Storage Inverter User Manual (V00, 2025-08-28)".
Where: SRNE HESP-HJP series 48V 4-6.5kW 100&200V Split-Phase Hybrid Solar Storage Inverter User Manual (V00, 2025-08-28), PDF page 58, Waveform row; spec-table row
100/200 V AC (Split-phase); 100/173V (Three-phase)
Printed as "Rated Output Voltage 100/200Vac (Split-phase); 100/173V (Three-phase)" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, specification table, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, specification table, "Rated Output Voltage" row, HESP4860U140-HJP column
Printed as "Protection Degree IP65" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, "Protection Degree" row, HESP4860U140-HJP column
Printed as "Max. PV Input Current 32A/32A" (one figure per MPPT tracker), shared across all four models; confirmed against the table's rendered page image.
Printed as "Max. Open Circuit Voltage 600V/600V" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, PV Input, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026. The same figure is printed for each MPPT input.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, PV Input, "Max. Open Circuit Voltage" row, HESP4860U140-HJP column
Printed as "Switch Time 10ms (Typical)" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), chapter 9, captured on September 26, 2026.
Printed as "43mm²/ 1 AWG 140A 2P-200A" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), section 4.2, Battery table, captured on September 26, 2026. Row for this model: cable, max. input current, breaker.
Generator input; max. generator charging current 140A
Printed as "Max. Generator Charging Current 140A" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), chapter 9, captured on September 26, 2026. Section 4.2 lists a generator input with its own cable and breaker.
Printed as "HESP4860U140-HJP 14mm²/6AWG(L1/L2/N) 60A 3P-100A" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), section 4.2, Grid and Generator tables, captured on September 26, 2026.
Printed as "Bypass Overload Current 60A" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), chapter 9, captured on September 26, 2026.
Printed as "Parallel Capacity 1–6 units (3-phase output available with 2 or more units)" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026. Units that may operate in parallel, as printed.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, "Parallel Capacity" row, HESP4860U140-HJP column
Printed as "HESP4860U140-HJP 14mm²/6AWG(L1/L2/N) 60A 3P-100A" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), section 4.2, Load table, captured on September 26, 2026.
Printed as "Rated Output Power 4000W 5000W 6000W 6500W" in SRNE HESP-HJP series 48V 4-6.5kW 100&200V Split-Phase Hybrid Solar Storage Inverter User Manual (V00, 2025-08-28), User manual, chapter 9 Datasheet (page 58), Inverter Output (Load) Rated Output Power row, HESP4860U140-HJP column. Revised on 1 October 2026: SRNE's user manual prints this rating in watts for this model, and the kilowatt figure is a direct conversion of that printed value; the manual is the primary source.
Where: User manual, chapter 9 Datasheet (page 58), Inverter Output (Load) Rated Output Power row, HESP4860U140-HJP column
Printed as "Single-phase unbalanced output power 4500W" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), chapter 9, captured on September 26, 2026. Value for this model, converted to kW.
Printed as "Battery Type Lithium-ion Battery / Lead-acid Battery / User-defined" in the SRNE HESP-HJP series 4-6.5kW 100&200V Split-Phase Hybrid Inverter User Manual (V00, 2025-08-28), chapter 9, captured on September 26, 2026.
Read from SRNE's published document at https://www.srnesolar.com/productdetail/Hybrid-Inverter-HESP-4-6kW-JP.html, from a table or row headed by model HESP4860U140-HJP. Printed: "40~60Vdc". Conditions as stated in that document. No value was taken from another model or from a product name.
100/200 V AC (Split-phase); 100/173V (Three-phase)
Warranty
5 years
Size
76 L* (Calculated from published dimensions)400 × 760 × 250 mm / 15.7 × 29.9 × 9.84 inWeight42 kg / 93 lb
Evidence score
6/100Missing details30% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Certificate evidence needed; Battery conversion efficiency needed; Idle consumption needed.
Each input is scored against the best documented value for an inverter: warranty term and battery conversion efficiency against every published inverter, idle consumption (lower is better) against the inverters in the same output band, or against every published inverter when the output is not documented. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Researched products receive a score. Certificates earn points for the evidence itself. Size and weight do not affect scores.
Warranty term5 years6.0 / 30.0
5 of 25 years, the best documented for an inverter (printed by the maker): APsystems DS3
Printed as "Warranty 5 years" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026.
Research pending, 0 points: Certificates, Battery conversion efficiency, Idle consumption.
Warranty term and battery conversion efficiency are compared with every published inverter; idle consumption with the inverters in the same 3.5 to 7 kW output band. · Method version 0.5
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
StandardEvidenceStatusSource
EN 61000manufacturer claimpresent at observation[1]
Scope
equipment listing
Covered models
HESP4860U140-HJP
Limitations
Listed in the "Certificate" row of the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, captured on September 25, 2026. Printed as "EN 61000" in the line "Certificate IEC 62109-1/-2 EN 61000". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
IEC 62109-1/-2manufacturer claimpresent at observation[1]
Scope
equipment listing
Covered models
HESP4860U140-HJP
Limitations
Listed in the "Certificate" row of the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, captured on September 25, 2026. Printed as "IEC 62109-1/-2" in the line "Certificate IEC 62109-1/-2 EN 61000". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
Printed as "Warranty 5 years" in the SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, in one cell spanning the HESP4840U120-HJP, HESP4850U120-HJP, HESP4860U140-HJP and HESP4865U140-HJP columns, captured on September 25, 2026.
Where: SRNE HESP-HJP series 48V 4-6.5kW 100 and 200V split-phase hybrid solar storage inverter datasheet V00, General Data, "Warranty" row, HESP4860U140-HJP column
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-26.
Location: Cable and circuit breaker requirements; datasheet chapter
Retrieved Sep 25, 2026
SRNE's own user manual (HESP-HJP series 48V 4-6.5kW 100&200V Split-Phase Hybrid Solar Storage Inverter User Manual (V00, 2025-08-28)), listed on srnesolar.com Download, captured on September 26, 2026. Its cable and circuit breaker tables and its datasheet chapter print values by model.
Archived copies
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
SRNE publishes this datasheet for HESP4840U120-HJP, among other models named on the same document. Read from https://www.srnesolar.com/product/Single-Phase-Low-Voltage-Hybrid-Inverter.html on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Location: Document title as published
Retrieved Sep 19, 2026
SRNE publishes this datasheet for HESP4840U120-HJP, among other models named on the same document. Read from https://www.srnesolar.com/product/Single-Phase-Low-Voltage-Hybrid-Inverter.html on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
SRNE datasheet
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
SRNE HESP-HJP series 48V 4-6.5kW 100&200V Split-Phase Hybrid Solar Storage Inverter User Manual (V00, 2025-08-28)
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.