Charged ReviewsSaved 0Compare 0Login
SRNE HESP4860S100-H
SRNE
Hybrid inverter

SRNE HESP4860S100-H

Key specs

Weight22.1 kg / 48.7 lb converted
Continuous output6 kW
Max PV voltage500 V
Efficiency97.5 %
Max charge100 A
MPPT count2 count

All specifications

Identity

BrandSRNE · Website
ModelHESP4860S100-H
MarketUnknown
Manufacturer SKUUnknown
SKU detail
conditions: Ordering SKU not established.
Sources: No source on record
FieldValueConditionsSource
Weight22.1 kg / 48.7 lb converted
Printed as "Weight 22.1kg", shared across all six models; confirmed against the table's rendered page image.
Where: Section 9 Parameter Sheet, Basic data, "Weight" row
[1]
MPPT count2 count
Printed as "No. of MPPT Trackers 2" in the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, PV Input, in one cell spanning the HESP4836S100-H, HESP4840S100-H, HESP4846S100-H, HESP4855S100-H and HESP4860S100-H columns, captured on September 25, 2026.
Where: SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, PV Input, "No. of MPPT Trackers" row, HESP4860S100-H column
[2]
Peak output12000VA
Printed as "Max. Peak Power 12000VA" in the HESP4860S100-H column (its own column); confirmed against the table's rendered page image.
Where: Section 9 Parameter Sheet, AC Output (load), "Max. Peak Power" row, HESP4860S100-H column
[1]
AC voltage230 V
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/Datasheet 0902.pdf, from the specification column headed HESP4860S100-H. Printed value: "230Vac(Single phase)(200/208/220/240Vac settable)". Conditions as stated on that sheet. No value was taken from another model or from a name.
Where: PDF page 2, "Rated Output Voltage" row
[3]
Max charge100 A
Printed as "Max. Hybrid Charging Current 100Adc" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), datasheet chapter, captured on September 26, 2026.
Where: Datasheet chapter
[1]
PV wire size4mm2/12AWG
Printed as "HESP4860S100-H 4mm2/12AWG 16A/16A 2P—25A" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), section 4.2, PV Input table, captured on September 26, 2026.
Where: Section 4.2 Cable & circuit breaker requirement
[1]
Dimensions556 × 345 × 182 mm / 21.9 × 13.6 × 7.17 in converted
Printed as "Dimension 556*345*182mm" in the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, General Data, in one cell spanning the HESP4836S100-H, HESP4840S100-H, HESP4846S100-H, HESP4855S100-H and HESP4860S100-H columns, captured on September 25, 2026. The datasheet does not name the axes; the three figures are kept in printed order.
Where: SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, General Data, "Dimension" row, HESP4860S100-H column
[2]
CommunicationsRS485; CAN; USB; Dry contact; Wi-Fi (optional); GPRS (optional)
Printed as "Communication port RS485 / CAN / USB / Dry contact" and "External Modules (Optional) Wi-Fi / GPRS", shared across all six models; confirmed against the table's rendered page image.
Where: Section 9 Parameter Sheet, Basic data, "Communication port" and "External Modules (Optional)" rows
[1]
Efficiency97.5 %
Printed as "Max. Efficiency 97.5%" in the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, Efficiency, in one cell spanning the HESP4836S100-H, HESP4840S100-H, HESP4846S100-H, HESP4855S100-H and HESP4860S100-H columns, captured on September 25, 2026. Manufacturer rating; the datasheet does not state test conditions.
Where: SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, Efficiency, "Max. Efficiency" row, HESP4860S100-H column
[2]
MPPT voltage120 to 450 V
Printed as "MPPT Operating Voltage Range 120~450Vdc" in the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, PV Input, in one cell spanning the HESP4836S100-H, HESP4840S100-H, HESP4846S100-H, HESP4855S100-H and HESP4860S100-H columns, captured on September 25, 2026.
Where: SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, PV Input, "MPPT Operating Voltage Range" row, HESP4860S100-H column
[2]
Solar array4500W+4500W
Printed as "Max. PV array power 4500W+4500W" (one figure per MPPT tracker, 2 trackers) in the HESP4860S100-H column; confirmed against the table's rendered page image. Kept in printed per-tracker form rather than summed.
Where: Section 9 Parameter Sheet, PV Input, "Max. PV array power" row, HESP4860S100-H column
[1]
AC frequency50/60Hz
Printed as "Rated Frequency 50/60Hz" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), datasheet chapter, captured on September 26, 2026.
Where: Datasheet chapter
[1]
Max AC charge60 A
Printed as "Max. Grid Charging Current 60Adc" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), datasheet chapter, captured on September 26, 2026.
Where: Datasheet chapter
[1]
Output waveformPure sine wave
Printed as "Waveform Pure Sine Wave" in the maker's document "SRNE HESP series EU 48V 3.6~6kW 230V Single phase Solar Hybrid Inverter User Manual (V2.7, 2025-05-26)".
Where: SRNE HESP series EU 48V 3.6~6kW 230V Single phase Solar Hybrid Inverter User Manual (V2.7, 2025-05-26), PDF page 56, Waveform row; spec-table row
[1]
AC configuration230 V AC (Single phase) (200/208/220/240 V AC settable)
Printed as "Rated Output Voltage 230Vac(Single phase)(200/208/220/240Vac settable)" in the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, specification table, in one cell spanning the HESP4836S100-H, HESP4840S100-H, HESP4846S100-H, HESP4855S100-H and HESP4860S100-H columns, captured on September 25, 2026.
Where: SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, specification table, "Rated Output Voltage" row, HESP4860S100-H column
[2]
Enclosure ratingIP65
Printed as "Protection Degree IP65" in the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, General Data, in one cell spanning the HESP4836S100-H, HESP4840S100-H, HESP4846S100-H, HESP4855S100-H and HESP4860S100-H columns, captured on September 25, 2026.
Where: SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, General Data, "Protection Degree" row, HESP4860S100-H column
[2]
Max PV current16/16Adc
Printed as "Max. Input Current 16/16Adc" (one figure per MPPT tracker), shared across all six models; confirmed against the table's rendered page image.
Where: Section 9 Parameter Sheet, PV Input, "Max. Input Current" row
[1]
Max PV voltage500 V
Printed as "Max. Open Circuit Voltage 500Vdc" in the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, PV Input, in one cell spanning the HESP4836S100-H, HESP4840S100-H, HESP4846S100-H, HESP4855S100-H and HESP4860S100-H columns, captured on September 25, 2026.
Where: SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, PV Input, "Max. Open Circuit Voltage" row, HESP4860S100-H column
[2]
Transfer time10 ms
Printed as "Switch Time 10ms (typical)", shared across all six models; confirmed against the table's rendered page image.
Where: Section 9 Parameter Sheet, AC Output (load), "Switch Time" row
[1]
Battery wire size35mm2/2AWG
Printed as "HESP4860S100-H 35mm2/2AWG 135A 100A 2P-200A" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), section 4.2, Battery table, captured on September 26, 2026. Columns: cable, max. battery discharge current, max. battery charge current, breaker.
Where: Section 4.2 Cable & circuit breaker requirement
[1]
Generator supportGenerator input; max. generator charging current 60A
Printed as "Max. Generator Charging Current 60Adc" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), datasheet chapter, captured on September 26, 2026.
Where: Datasheet chapter
[1]
Nominal voltage48 V
Manufacturer Rated Battery Voltage; exact model column; source value 48V
Where: PDF physical page 2; table row 20 "Rated Battery Voltage"; exact HESP4860S100-H column
[2]
AC input wire size8mm2/8AWG
Printed as "HESP4860S100-H 8mm2/8AWG 40A 2P—40A" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), section 4.2, Grid and Generator tables, captured on September 26, 2026.
Where: Section 4.2 Cable & circuit breaker requirement
[1]
Grid passthrough40 A
Printed as "Max. Bypass Overload Current 40Aac" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), datasheet chapter, captured on September 26, 2026.
Where: Datasheet chapter
[1]
Idle consumption100 W
<100W as printed
Printed as "Self-consumption <100W", shared across all six models; confirmed against the table's rendered page image. Recorded as the printed ceiling ("<100W").
Where: Section 9 Parameter Sheet, Basic data, "Self-consumption" row
[1]
Max parallel units6 count
Printed as "Parallel Capacity 1~6 Units(More than 3 units in parallel can form a three-phase output)" in the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, General Data, in one cell spanning the HESP4836S100-H, HESP4840S100-H, HESP4846S100-H, HESP4855S100-H and HESP4860S100-H columns, captured on September 25, 2026. Units that may operate in parallel, as printed.
Where: SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, General Data, "Parallel Capacity" row, HESP4860S100-H column
[2]
AC output wire size8mm2/8AWG
Printed as "HESP4860S100-H 8mm2/8AWG ... 2P-40A" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), section 4.2, Load table, captured on September 26, 2026.
Where: Section 4.2 Cable & circuit breaker requirement
[1]
Continuous output6 kW
Manufacturer Rated Output Power; exact model column; source value 6000W; rated output, no separate time/temperature condition inferred W converted to kW.
Where: PDF physical page 2; table row 3 "Rated Output Power"; exact HESP4860S100-H column
[2]
Battery compatibilityLi-ion, lead-acid or user-defined batteries
Printed as "Battery Type Li-ion / Lead-Acid / User Defined" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), datasheet chapter, captured on September 26, 2026.
Where: Datasheet chapter
[1]
Max PV short circuit27 A
Printed as "Max. PV Isc 27A/27Adc" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), datasheet chapter, captured on September 26, 2026. Per MPPT.
Where: Datasheet chapter
[1]
Recommended protectionBattery breaker 2P-200A; PV breaker 2P—25A; grid and generator breakers 2P—40A; load breaker 2P-40A
Printed as "HESP4860S100-H 35mm2/2AWG 135A 100A 2P-200A; HESP4860S100-H 4mm2/12AWG 16A/16A 2P—25A; HESP4860S100-H 8mm2/8AWG 40A 2P—40A" in the SRNE HESP series 48V 3.6~6kW 230V Single-phase Hybrid Inverter User Manual (V2.7, 2025-05-26), section 4.2, captured on September 26, 2026.
Where: Section 4.2 Cable & circuit breaker requirement
[1]
Battery voltage range40 to 60 V
Printed as "Voltage Range 40~60Vdc", shared across all six models; confirmed against the table's rendered page image.
Where: Section 9 Parameter Sheet, Battery, "Voltage Range" row
[1]
Operating temperature-25 to 60 C / -13 to 140 °F converted
Printed as "Operating Temperature Range -25~60℃,>45℃ derated", shared across all six models; confirmed against the table's rendered page image.
Where: Section 9 Parameter Sheet, Basic data, "Operating Temperature Range" row
[1]

Owner reviews

No owner reviews yet
Write a review

Sellers

No listed sellers in this data.

Price history

No seller price history.

Quick reference sheet

Continuous output
6 kW
Battery voltage
40 to 60 V
Solar input
4500W+4500WMPPT trackers 2MPPT range 120 to 450 V
AC output
230 V AC (Single phase) (200/208/220/240 V AC settable)
Warranty
5 years
Size
34.91 L* (Calculated from published dimensions)556 × 345 × 182 mm / 21.9 × 13.6 × 7.17 inWeight 22.1 kg / 48.7 lb

Evidence score

6/100Missing details40% documented

The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.

Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.

Missing for this product: Certificate evidence needed; Battery conversion efficiency needed.

Each input is scored against the best documented value for an inverter: warranty term and battery conversion efficiency against every published inverter, idle consumption (lower is better) against the inverters in the same output band, or against every published inverter when the output is not documented. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Researched products receive a score. Certificates earn points for the evidence itself. Size and weight do not affect scores.

Warranty term5 years6.0 / 30.0

5 of 25 years, the best documented for an inverter (printed by the maker): APsystems DS3

Printed as "Warranty 5 years" in the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, General Data, in one cell spanning the HESP4836S100-H, HESP4840S100-H, HESP4846S100-H, HESP4855S100-H and HESP4860S100-H columns, captured on September 25, 2026.

[2]

Idle consumption100 W0.1 / 10.0

100 against 1 W, the lowest documented for an inverter in the 3.5 to 7 kW output band (printed by the maker): Fronius Primo 3.8-1 208-240. The bar is a printed bound: less than 1 W, as printed.

Printed as "Self-consumption <100W", shared across all six models; confirmed against the table's rendered page image. Recorded as the printed ceiling ("<100W"). Printed as a bound: less than 100 W, as printed.

[1]

Research pending, 0 points: Certificates, Battery conversion efficiency.

Warranty term and battery conversion efficiency are compared with every published inverter; idle consumption with the inverters in the same 3.5 to 7 kW output band. · Method version 0.5

How it works

Certificates

What this shows: what each record says and how far it reaches. It does not mean the product is approved.
CEI021manufacturer claimpresent at observation[2]
Scope
equipment listing
Covered models
HESP4860S100-H
Limitations
Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "CEI021" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[2]
EN50549-1manufacturer claimpresent at observation[2]
Scope
equipment listing
Covered models
HESP4860S100-H
Limitations
Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "EN50549-1" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[2]
EN61000-6-1manufacturer claimpresent at observation[2]
Scope
equipment listing
Covered models
HESP4860S100-H
Limitations
Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "EN61000-6-1" in the line "EN61000-6-1,EN61000-6-3, FCC 15 class B,RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[2]
EN61000-6-3manufacturer claimpresent at observation[2]
Scope
equipment listing
Covered models
HESP4860S100-H
Limitations
Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "EN61000-6-3" in the line "EN61000-6-1,EN61000-6-3, FCC 15 class B,RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[2]
FCC 15 class Bmanufacturer claimpresent at observation[2]
Scope
equipment listing
Covered models
HESP4860S100-H
Limitations
Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "FCC 15 class B" in the line "EN61000-6-1,EN61000-6-3, FCC 15 class B,RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[2]
G99manufacturer claimpresent at observation[2]
Scope
equipment listing
Covered models
HESP4860S100-H
Limitations
Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "G99" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[2]
NRS-097manufacturer claimpresent at observation[2]
Scope
equipment listing
Covered models
HESP4860S100-H
Limitations
Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "NRS-097" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[2]
UNE217002manufacturer claimpresent at observation[2]
Scope
equipment listing
Covered models
HESP4860S100-H
Limitations
Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "UNE217002" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[2]
VDE-ARN-4105manufacturer claimpresent at observation[2]
Scope
equipment listing
Covered models
HESP4860S100-H
Limitations
Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "VDE-ARN-4105" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[2]
IEC 62109manufacturer claimunknown[3]
Scope
equipment listing
Covered models
HESP4860S100-H
Limitations
SRNE prints "IEC 62109" in a certification, standards or compliance row on PDF page 2 of https://www.srnesolar.com/userfiles/files/2025/09/05/Datasheet 0902.pdf, a document this catalog already attaches to HESP4860S100-H; the value was located through the specification column headed HESP4860S100-H. This is a manufacturer statement only: no issuer listing, certificate number, edition, scope or validity was checked, and the printed row may cover further models in the same family.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Issuer checked: Sep 19, 2026
Source
[3]

Warranty

FieldValueConditionsSource
RemedyFree repair or replacement of the unit or components at SRNE's discretion; remaining term continues
Printed as "SRNE will provide free repair or replacement services (including the entire unit or components) at its discretion." in SRNE's PV Storage Hybrid Inverter Warranty Description (Australia), captured on September 26, 2026. The replaced product keeps the original remaining term.
Where: Section III
[4]
TerritoryAustralia
Printed as "Territory: Australia." in SRNE's PV Storage Hybrid Inverter Warranty Description (Australia), captured on September 26, 2026.
Where: Section I, Definitions
[4]
ConditionsBought from an authorized dealer and installed in Australia, unaltered serial number, installed and maintained per the manual; exclusions include non-SRNE-certified batteries, unprotected outdoor installation, misuse, transport damage and force majeure
Printed as "The Product is purchased from an Authorized Dealer within the Territory." in SRNE's PV Storage Hybrid Inverter Warranty Description (Australia), captured on September 26, 2026. Section IV lists the exclusions, including "The Product being installed with non-SRNE-certified batteries/PCS/EMS."
Where: Sections III and IV
[4]
Start basis6 months after the production date shown on the serial number
Printed as "5 years, commencing 6 months after the production date shown on the Product’s serial number (SN code)" in SRNE's PV Storage Hybrid Inverter Warranty Description (Australia), captured on September 26, 2026. The 6-month period includes transportation, warehousing and installation time.
Where: Section II.2 Standard Warranty Period
[4]
Warranty term5 years
Printed as "Warranty 5 years" in the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, General Data, in one cell spanning the HESP4836S100-H, HESP4840S100-H, HESP4846S100-H, HESP4855S100-H and HESP4860S100-H columns, captured on September 25, 2026.
Where: SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, General Data, "Warranty" row, HESP4860S100-H column
[2]
Labor and shippingAccessories, toolkits and installation or dismantling services are not covered
Printed as "This warranty does not cover accessories, toolkits, or installation/dismantling services provided with the Product." in SRNE's PV Storage Hybrid Inverter Warranty Description (Australia), captured on September 26, 2026.
Where: Section III
[4]

Recalls / legal notices

No recalls on file. All notices · Report a notice

This register is incomplete. A missing notice does not establish that a product has no recalls.

Documents

  • Manuals

  • SRNE HESP series EU 48V 3.6~6kW 230V Single phase Solar Hybrid Inverter User Manual (V2.7, 2025-05-26)Official · SRNE · Official user manual · May 26, 2025 · PDF
    Source details
    Revision
    V2.7
    Revision date
    May 26, 2025

    Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-26.

    Location: Cable and circuit breaker requirements; datasheet chapter

    Retrieved Sep 25, 2026

    SRNE's own user manual (HESP series EU 48V 3.6~6kW 230V Single phase Solar Hybrid Inverter User Manual (V2.7, 2025-05-26)), listed on srnesolar.com Download, captured on September 26, 2026. Its cable and circuit breaker tables and its datasheet chapter print values by model.

    Archived copies

    Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupV2.7 · 4.33 MB

    Archived copy, unaltered, kept as a record of what SRNE published. Original address: https://www.srnesolar.com/userfiles/files/2025/06/17/SRNE_HESP%20series%20EU_48V_3.6~6kW_230V_Single%20phase_Solar%20Hybrid%20Inverter_User%20Manual_V2.7%5B20250526%5D.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source

    Printed revision date: 2025-05-26

    Embedded creation date
    Embedded modification date
    Pages
    60

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: 797d778e0338a28a98bef19c55e026b8bd1c7f0d150c845b4d64915681e5b674

    Open
  • Datasheets

  • SRNE datasheetOfficial · SRNE · Official datasheet · PDF
    Certificate & compliance claims (1)
    IEC 62109Manufacturer claim · equipment listingClaimedStatus unconfirmed

    SRNE prints "IEC 62109" in a certification, standards or compliance row on PDF page 2 of https://www.srnesolar.com/userfiles/files/2025/09/05/Datasheet 0902.pdf, a document this catalog already attaches to HESP4860S100-H; the value was located through the specification column headed HESP4860S100-H. This is a manufacturer statement only: no issuer listing, certificate number, edition, scope or validity was checked, and the printed row may cover further models in the same family.

    Manufacturer document

    Official datasheet: SRNE datasheet
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Identity at specified physical page; specifications only where separately field-cited

    Location: PDF page 2

    Retrieved Sep 15, 2026

    SHA-256: 2bcd360b3c494e9b2fbe1bd846210c462b310977877370bb7efb189629395d1e

    Archived copies

    Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupRevision not recorded · 5.17 MB

    Archived copy, unaltered, kept as a record of what SRNE published. Original address: https://www.srnesolar.com/userfiles/files/2025/09/05/Datasheet 0902.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    Embedded modification date
    None
    Pages
    2

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: 2bcd360b3c494e9b2fbe1bd846210c462b310977877370bb7efb189629395d1e

    Open
  • Warranty

  • SRNE PV Storage Hybrid Inverter Warranty Description (Australia, 2025-08-29)Official · SRNE · Official warranty · August 29, 2025 · PDF
    Source details
    Revision
    Not stated
    Revision date
    August 29, 2025

    Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-26.

    Location: Sections II to VII

    Retrieved Sep 25, 2026

    SRNE's own warranty description for the HESP4836S100-H to HESP4860S100-H hybrid inverters sold in Australia, listed on srnesolar.com Download, captured on September 26, 2026. It covers the Australian territory only.

    Archived copies

    Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupRevision not recorded · 0.17 MB

    Archived copy, unaltered, kept as a record of what SRNE published. Original address: https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE%20PV%20Storage%20Hybrid%20Inverter%20Warranty%20Description--0829.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source

    Printed revision date: 2025-08-29

    Embedded creation date
    Embedded modification date
    Pages
    5

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: 2e6d16345990342aa51c86495b47966c102266a164421a90b8f415a0a775c26d

    Open
  • Other documents

  • SRNE HESP4836S100-H product identityOfficial · SRNE · Official product page · Web page
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Revision date not established.

    Location: Original source record

    Retrieved Sep 15, 2026

    Open

Archive and older revisions

Archive and older revisions2

Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.

  • SRNE datasheetOfficial · SRNE · Official datasheet · PDF
    Certificate & compliance claims (9)
    EN50549-1Manufacturer claim · equipment listingClaimedListed when checked

    Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "EN50549-1" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.

    Manufacturer document

    Official datasheet: SRNE datasheet
    G99Manufacturer claim · equipment listingClaimedListed when checked

    Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "G99" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.

    Manufacturer document

    Official datasheet: SRNE datasheet
    NRS-097Manufacturer claim · equipment listingClaimedListed when checked

    Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "NRS-097" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.

    Manufacturer document

    Official datasheet: SRNE datasheet
    VDE-ARN-4105Manufacturer claim · equipment listingClaimedListed when checked

    Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "VDE-ARN-4105" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.

    Manufacturer document

    Official datasheet: SRNE datasheet
    CEI021Manufacturer claim · equipment listingClaimedListed when checked

    Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "CEI021" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.

    Manufacturer document

    Official datasheet: SRNE datasheet
    UNE217002Manufacturer claim · equipment listingClaimedListed when checked

    Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "UNE217002" in the line "Certificate EN50549-1,G99,NRS-097,VDE-ARN-4105,CEI021,UNE217002,IEC62109-1, IEC62109-2,". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.

    Manufacturer document

    Official datasheet: SRNE datasheet
    EN61000-6-1Manufacturer claim · equipment listingClaimedListed when checked

    Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "EN61000-6-1" in the line "EN61000-6-1,EN61000-6-3, FCC 15 class B,RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.

    Manufacturer document

    Official datasheet: SRNE datasheet
    EN61000-6-3Manufacturer claim · equipment listingClaimedListed when checked

    Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "EN61000-6-3" in the line "EN61000-6-1,EN61000-6-3, FCC 15 class B,RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.

    Manufacturer document

    Official datasheet: SRNE datasheet
    FCC 15 class BManufacturer claim · equipment listingClaimedListed when checked

    Listed in the "Certificate" row of the SRNE HESP series EU 48V 3.6~6kW 230V single-phase hybrid solar storage inverter datasheet V1.2, captured on September 25, 2026. Printed as "FCC 15 class B" in the line "EN61000-6-1,EN61000-6-3, FCC 15 class B,RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read. The row wraps onto a second line in the datasheet.

    Manufacturer document

    Official datasheet: SRNE datasheet
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Identity at specified physical page; specifications only where separately field-cited

    Location: PDF page 2

    Retrieved Sep 15, 2026

    SHA-256: ed6f2d00f341721db10496c178d2e2ba4e00091700979f47330c89b27ada16f1

    Archived copies

    Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupRevision not recorded · 4.72 MB

    Archived copy, unaltered, kept as a record of what SRNE published. Original address: https://www.srnesolar.com/userfiles/files/2026/06/04/SRNE_HESP series_EU_48V_3.6~6kW_230V_Single-Phase_Hybrid_Solar Storage Inverter_Datasheet_V1.2[20250618].pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    Embedded modification date
    None
    Pages
    2

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: ed6f2d00f341721db10496c178d2e2ba4e00091700979f47330c89b27ada16f1

    Open
  • SRNE HESP4840S100-H product identityOfficial · SRNE · Official product page · Web page
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Revision date not established.

    Location: Original source record

    Retrieved Sep 15, 2026

    Open

Archived documents

SRNE datasheet

Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupRevision not recorded · 5.17 MB

Archived copy, unaltered, kept as a record of what SRNE published. Original address: https://www.srnesolar.com/userfiles/files/2025/09/05/Datasheet 0902.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
None
Pages
2

Embedded dates are file metadata, not independent proof of publication.

SHA-256: 2bcd360b3c494e9b2fbe1bd846210c462b310977877370bb7efb189629395d1e

SRNE datasheet

Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupRevision not recorded · 4.72 MB

Archived copy, unaltered, kept as a record of what SRNE published. Original address: https://www.srnesolar.com/userfiles/files/2026/06/04/SRNE_HESP series_EU_48V_3.6~6kW_230V_Single-Phase_Hybrid_Solar Storage Inverter_Datasheet_V1.2[20250618].pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
None
Pages
2

Embedded dates are file metadata, not independent proof of publication.

SHA-256: ed6f2d00f341721db10496c178d2e2ba4e00091700979f47330c89b27ada16f1

SRNE HESP series EU 48V 3.6~6kW 230V Single phase Solar Hybrid Inverter User Manual (V2.7, 2025-05-26)

Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupV2.7 · 4.33 MB

Archived copy, unaltered, kept as a record of what SRNE published. Original address: https://www.srnesolar.com/userfiles/files/2025/06/17/SRNE_HESP%20series%20EU_48V_3.6~6kW_230V_Single%20phase_Solar%20Hybrid%20Inverter_User%20Manual_V2.7%5B20250526%5D.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source

Printed revision date: 2025-05-26

Embedded creation date
Embedded modification date
Pages
60

Embedded dates are file metadata, not independent proof of publication.

SHA-256: 797d778e0338a28a98bef19c55e026b8bd1c7f0d150c845b4d64915681e5b674

SRNE PV Storage Hybrid Inverter Warranty Description (Australia, 2025-08-29)

Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupRevision not recorded · 0.17 MB

Archived copy, unaltered, kept as a record of what SRNE published. Original address: https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE%20PV%20Storage%20Hybrid%20Inverter%20Warranty%20Description--0829.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source

Printed revision date: 2025-08-29

Embedded creation date
Embedded modification date
Pages
5

Embedded dates are file metadata, not independent proof of publication.

SHA-256: 2e6d16345990342aa51c86495b47966c102266a164421a90b8f415a0a775c26d

Submit a document

Parts and accessories

No sourced accessories or replacement parts listed yet.

Model history

Model identity

Model
HESP4860S100-H
  1. Observed Sep 19, 2026

    IEC 62109: claimed

    Product / system scope unresolved. SRNE prints "IEC 62109" in a certification, standards or compliance row on PDF page 2 of https://www.srnesolar.com/userfiles/files/2025/09/05/Datasheet 0902.pdf, a document this catalog already attaches to HESP4860S100-H; the value was located through the specification column headed HESP4860S100-H. This is a manufacturer statement only: no issuer listing, certificate number, edition, scope or validity was checked, and the printed row may cover further models in the same family.

    [3]

Other recorded fields

FieldValueConditionsSource
Evidence breakdown
method version: inverters-0.5-personal
documented pct: 40
basis: Unknown
missing:
Certificate evidence needed
Battery conversion efficiency needed
criteria:
key: certificates
label: Certificates
value: 0
unit: Unknown
shown: IEC 62109 · EN50549-1 +8
shown detail: Research pending
state: pending
points: 0
ceiling: 45
weight: 45
share: 0
covered: no
missing: yes
folded: yes
reason: Unknown
reason text: Unknown
note: No qualifying inverter certificate evidence recorded.
display note: Unknown
Sources: No source on record
key: warranty
label: Warranty term
value: 5
unit: Unknown
shown: 5 years
shown detail: Unknown
state: documented
points: 6
ceiling: 30
weight: 30
share: 20
covered: yes
missing: no
folded: no
reason: Unknown
reason text: Unknown
note:
display note: Unknown
Sources: [2]
key: efficiency
label: Battery conversion efficiency
value: Unknown
unit: Unknown
shown: Research pending
shown detail: Unknown
state: pending
points: 0
ceiling: 15
weight: 15
share: Unknown
covered: no
missing: yes
folded: yes
reason: undocumented
reason text: Not documented. Undisclosed data scores 0.
note: Not documented.
display note: Unknown
Sources: No source on record
key: idle
label: Idle consumption
value: 100
unit: Unknown
shown: 100 W
shown detail: Unknown
state: documented
points: 0.1
ceiling: 10
weight: 10
share: 1
covered: yes
missing: no
folded: no
reason: Unknown
reason text: Unknown
note: Printed as a bound: less than 100 W, as printed.
display note: Unknown
Sources: [1]

Community discussions

No discussions linked yet. Search DIY Solar Forum

Sources

  1. SRNE HESP series EU 48V 3.6~6kW 230V Single phase Solar Hybrid Inverter User Manual (V2.7, 2025-05-26) (SRNE · manufacturer · V2.7 · observed Sep 25, 2026)
  2. SRNE datasheet (SRNE · manufacturer · observed Sep 15, 2026)
  3. SRNE datasheet (SRNE · manufacturer · observed Sep 15, 2026)
  4. SRNE PV Storage Hybrid Inverter Warranty Description (Australia, 2025-08-29) (SRNE · manufacturer · observed Sep 25, 2026)

Sign in to report an error on this page

Similar products

All with a price

* Missing details