Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "42kg". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, GENERAL DATA Weight row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "2". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, No. of MPPT Trackers row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "120/240Vac (Split-phase);120/208Vac (Three-phase)". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Rated Output Voltage row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "50/60Hz". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Rated Frequency row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "200A". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Max. Hybrid Charging Current row spanning all three model columns
Printed as "PV1 6mm²/ 10 AWG 25A 2P-25A" in the SRNE HESP48120U200-H (8-12kW) US Split-phase Hybrid Inverter User Manual (V1.4, 2026-03-24), section 4.2, PV Input table, captured on September 26, 2026.
750 × 440 × 240 mm / 29.5 × 17.3 × 9.45 in converted
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "750*440*240mm". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, GENERAL DATA Dimension row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "RS485/CAN/USB/ Dry Contact". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Communication row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "97.5%". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Max. Efficiency row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "125~450Vdc/125~450Vdc". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, MPPT Operating Voltage Range row spanning all three model columns
Printed as "Max. PV Array Power 5500W/5500W 5500W/5500W 6600W/6600W" in SRNE_HESP48120U200-H(8-12kW)_US_Split-phase_hybrid_Solar hybrid inverter_User manual_V1.4, User manual, chapter 9 Datasheet (page 50), PV input Max. PV Array Power row, HESP48120U200-H column. Revised on 1 October 2026: SRNE's user manual prints the maximum PV input power in watts for each of the two PV inputs, and the stored kilowatt figure is a direct conversion of the per-input value; the manual is the primary source.
Where: User manual, chapter 9 Datasheet (page 50), PV input Max. PV Array Power row, HESP48120U200-H column
Printed as "Rated AC Frequency 50/60Hz" in the SRNE HESP48120U200-H (8-12kW) US Split-phase Hybrid Inverter User Manual (V1.4, 2026-03-24), chapter 9, captured on September 26, 2026.
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "120A". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Max. Grid Charging Current row spanning all three model columns
120/240 V AC (Split-phase);120/208 V AC (Three-phase)
Printed as "Rated Output Voltage 120/240Vac (Split-phase);120/208Vac (Three-phase)" in the SRNE HESP US 48V 8~12kW 120V and 240V split-phase hybrid solar storage inverter datasheet V1.5, specification table, in one cell spanning the HESP4880U200-H, HESP48100U200-H and HESP48120U200-H columns, captured on September 25, 2026.
Where: SRNE HESP US 48V 8~12kW 120V and 240V split-phase hybrid solar storage inverter datasheet V1.5, specification table, "Rated Output Voltage" row, HESP48120U200-H column
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "IP65". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Protection Degree row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "25A/25A". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Max. PV Input Current row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "550Vdc/550Vdc". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Max. Open Circuit Voltage row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "12000VA". Conditions as stated in that document. No value was taken from another model or from a product name.
Generator input; max. generator charging current 60A
Printed as "Max. Generator Charging Current 60A" in the SRNE HESP48120U200-H (8-12kW) US Split-phase Hybrid Inverter User Manual (V1.4, 2026-03-24), chapter 9, captured on September 26, 2026.
Printed as "HESP48120U200-H 13mm²/6AWG (L1/L2/N) 3P-63A" in the SRNE HESP48120U200-H (8-12kW) US Split-phase Hybrid Inverter User Manual (V1.4, 2026-03-24), section 4.2, AC Input table, captured on September 26, 2026.
Printed as "Bypass Phase Current 63A" in the SRNE HESP48120U200-H (8-12kW) US Split-phase Hybrid Inverter User Manual (V1.4, 2026-03-24), chapter 9, captured on September 26, 2026.
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "1~6 Units(More than 2 units in parallel can form a three-phase output)". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Parallel Capacity row spanning all three model columns
Printed as "HESP48120U200-H 13mm²/6AWG (L1/L2/N) 3P-63A" in the SRNE HESP48120U200-H (8-12kW) US Split-phase Hybrid Inverter User Manual (V1.4, 2026-03-24), section 4.2, AC Output table, captured on September 26, 2026.
12 kW*Converted: 12000W (printed at 240 V) x 0.001
Printed as "Rated Output Power 8800W 10,000W @240V 12000W @208V 10400W" in SRNE_HESP48120U200-H(8-12kW)_US_Split-phase_hybrid_Solar hybrid inverter_User manual_V1.4, User manual, chapter 9 Datasheet (page 50), Inverter output Rated Output Power row, HESP48120U200-H column. Revised on 1 October 2026: SRNE's user manual prints this rating in watts for this model, and the kilowatt figure is a direct conversion of that printed value; the manual is the primary source.
Where: User manual, chapter 9 Datasheet (page 50), Inverter output Rated Output Power row, HESP48120U200-H column
Printed as "Battery Type Li-ion / Lead-Acid / User Defined" in the SRNE HESP48120U200-H (8-12kW) US Split-phase Hybrid Inverter User Manual (V1.4, 2026-03-24), chapter 9, captured on September 26, 2026.
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "40~60Vdc". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Battery Voltage Range row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "-25 to +60°C, >45°C Derate". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Temperature row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "96.5%". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, CEC Energy Efficiency row spanning all three model columns
Read from SRNE's published document at https://www.srnesolar.com/userfiles/files/2025/09/05/SRNE_HESP_US_48V_8~12kW_120V&240V_Split-Phase_Hybrid_Solar%20Storage%20Inverter_Datasheet_V1.5%5B20250422%5D.pdf, from a table or row headed by model HESP48120U200-H. Printed: "60A". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: datasheet page 2, Max. Generator Charging Current row spanning all three model columns
I have a pair of HESP48120U200-H inverters (white label version SEI-12K-UP) with one in service 14 months. The other is my emergency spare. The working inverter is easily connected to batteries, grid, solar panels, and UPS loads. I have it powering a breaker panel in my all-electric tiny house. I've used it to power a 240 volt table saw, 10 kw EV charger, lights, fans, and all other normal loads. My list of loads include EV charger, well pump, cook stove, heat pump water heater, heat pump mini split, washer/dryer, refrigerator, upright freezer, microwave, air fryer, lights, fans, dishwasher, etc.
This inverter is rated for 100% output at 240 volts with up to 200% output for a few seconds (for large motor starting). It has the typical limit that it can only output power if battery capacity, solar panel capacity, or both are available. When I first connected it, I had a single battery on the inverter and turned on my table saw to cut a very large piece of wood. The load exceeded capacity from the battery which forced the inverter to shut down. This is exactly what the inverter should do! In other words, it worked exactly as expected.
Positives: It has worked for 14 months with zero issues so far providing power to a range of large tools and has charged my EV dozens of times. Output is high enough to pull my entire tiny house plus the EV charger, but don't take that too far. My tiny house is designed to use 20 kWh/day or less. The EV charger can easily pull 40 or 50 kWh/day.
Negatives: 12 kw is not quite enough for a large house pulling 40 or more kWh/day plus an EV charger at 10 kw continuous. If you need full house plus EV, a pair of these inverters should be able to carry the load. Weight is 42 kg (93 pounds) which I was able to wall mount with few issues. At full load, fan noise is fairly loud. I recommend installing where the noise won't be disruptive. This is NOT even close to as loud as some comparable inverters I've seen!
Startup is simple. Turn on the battery breakers (at the battery too if needed), turn on the PV switch on the side, turn on the inverter using the button on the bottom right rear (under the inverter), and turn on the output breakers.
120/240 V AC (Split-phase);120/208 V AC (Three-phase)
Warranty
5 years
Size
79.2 L* (Calculated from published dimensions)750 × 440 × 240 mm / 29.5 × 17.3 × 9.45 inWeight42 kg / 93 lb
Evidence score
20/100Missing details75% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Battery conversion efficiency needed; Idle consumption needed.
Each input is scored against the best documented value for an inverter: warranty term and battery conversion efficiency against every published inverter, idle consumption (lower is better) against the inverters in the same output band, or against every published inverter when the output is not documented. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Researched products receive a score. Certificates earn points for the evidence itself. Size and weight do not affect scores.
5 of 25 years, the best documented for an inverter (printed by the maker): APsystems DS3
Printed as "Warranty 5 yeas" in the SRNE HESP US 48V 8~12kW 120V and 240V split-phase hybrid solar storage inverter datasheet V1.5, General Data, in one cell spanning the HESP4880U200-H, HESP48100U200-H and HESP48120U200-H columns, captured on September 25, 2026. The datasheet spells the unit "yeas".
Research pending, 0 points: Battery conversion efficiency, Idle consumption.
Warranty term and battery conversion efficiency are compared with every published inverter; idle consumption with the inverters in the same 7 to 15 kW output band. · Method version 0.5
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
StandardEvidenceStatusSource
FCC 15 class Bmanufacturer claimpresent at observation[3]
Scope
equipment listing
Covered models
HESP48120U200-H
Limitations
Listed in the "Certificate" row of the SRNE HESP US 48V 8~12kW 120V and 240V split-phase hybrid solar storage inverter datasheet V1.5, captured on September 25, 2026. Printed as "FCC 15 class B" in the line "Certificate UL1741&IEEE1547.1-2020,CEC, RULE 21, HECO,FCC 15 class B,RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
IEEE1547.1-2020manufacturer claimpresent at observation[3]
Scope
equipment listing
Covered models
HESP48120U200-H
Limitations
Listed in the "Certificate" row of the SRNE HESP US 48V 8~12kW 120V and 240V split-phase hybrid solar storage inverter datasheet V1.5, captured on September 25, 2026. Printed as "IEEE1547.1-2020" in the line "Certificate UL1741&IEEE1547.1-2020,CEC, RULE 21, HECO,FCC 15 class B,RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
RULE 21manufacturer claimpresent at observation[3]
Scope
equipment listing
Covered models
HESP48120U200-H
Limitations
Listed in the "Certificate" row of the SRNE HESP US 48V 8~12kW 120V and 240V split-phase hybrid solar storage inverter datasheet V1.5, captured on September 25, 2026. Printed as "RULE 21" in the line "Certificate UL1741&IEEE1547.1-2020,CEC, RULE 21, HECO,FCC 15 class B,RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
Listed in the "Certificate" row of the SRNE HESP US 48V 8~12kW 120V and 240V split-phase hybrid solar storage inverter datasheet V1.5, captured on September 25, 2026. Printed as "UL1741" in the line "Certificate UL1741&IEEE1547.1-2020,CEC, RULE 21, HECO,FCC 15 class B,RoHS". A manufacturer claim: no certificate number, file number or issuer is printed and no issuer record was read.
UL 1741 SBauthority listing reportedlisted as of snapshot[4]
Scope
equipment listing
Covered models
HESP48120U200-H
Limitations
Listed on the California Energy Commission Grid Support Solar Inverter List (data unchanged since October 1, 2026; downloaded October 11, 2026) as SRNE Solar Co.,Ltd "HESP48120U200-H {208V}": UL 1741 SB, certifying entity Intertek, certificate date 2024-01-25, CEC listing date 2024-03-11. A state equipment list entry, not the certification body's own record.
CECauthority listing reportedlisted as of snapshot[4]
Scope
equipment listing
Covered models
HESP48120U200-H
Limitations
Model HESP48120U200-H listed on the California Energy Commission Grid Support Battery Inverter List (data unchanged since October 1, 2026; downloaded October 11, 2026) under SRNE Solar Co.,Ltd, as "HESP48120U200-H {208V}"; "HESP48120U200-H {240V}", CEC listing date 2024-03-11. This is an equipment listing, not UL certification or complete-system approval.
CECauthority listing reportedlisted as of snapshot[4]
Scope
equipment listing
Covered models
HESP48120U200-H
Limitations
Model HESP48120U200-H listed on the California Energy Commission Grid Support Solar Inverter List (data unchanged since October 1, 2026; downloaded October 11, 2026) under SRNE Solar Co.,Ltd, as "HESP48120U200-H {208V}"; "HESP48120U200-H {240V}", CEC listing date 2024-03-11. This is an equipment listing, not UL certification or complete-system approval.
Printed as "Warranty 5 yeas" in the SRNE HESP US 48V 8~12kW 120V and 240V split-phase hybrid solar storage inverter datasheet V1.5, General Data, in one cell spanning the HESP4880U200-H, HESP48100U200-H and HESP48120U200-H columns, captured on September 25, 2026. The datasheet spells the unit "yeas".
Where: SRNE HESP US 48V 8~12kW 120V and 240V split-phase hybrid solar storage inverter datasheet V1.5, General Data, "Warranty" row, HESP48120U200-H column
SRNE publishes this instruction manual for HESP4880U200-H, among other models named on the same document. Read from https://www.srnesolar.com/product/Single-Phase-Low-Voltage-Hybrid-Inverter.html on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Location: Document title as published
Retrieved Sep 19, 2026
SRNE publishes this instruction manual for HESP4880U200-H, among other models named on the same document. Read from https://www.srnesolar.com/product/Single-Phase-Low-Voltage-Hybrid-Inverter.html on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
SRNE publishes this datasheet for HESP4880U200-H, among other models named on the same document. Read from https://www.srnesolar.com/product/Single-Phase-Low-Voltage-Hybrid-Inverter.html on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Location: Document title as published
Retrieved Sep 19, 2026
SRNE publishes this datasheet for HESP4880U200-H, among other models named on the same document. Read from https://www.srnesolar.com/product/Single-Phase-Low-Voltage-Hybrid-Inverter.html on 2026-09-19. It establishes only what it prints; no issuer, laboratory or revision-currency check was made.
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
SRNE datasheet
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by SRNE. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
HESP48120U200-H
Observed Oct 11, 2026
UL 1741 SB: claimed
Product / system scope unresolved. Listed on the California Energy Commission Grid Support Solar Inverter List (data unchanged since October 1, 2026; downloaded October 11, 2026) as SRNE Solar Co.,Ltd "HESP48120U200-H {208V}": UL 1741 SB, certifying entity Intertek, certificate date 2024-01-25, CEC listing date 2024-03-11. A state equipment list entry, not the certification body's own record.
Product / system scope unresolved. Model HESP48120U200-H listed on the California Energy Commission Grid Support Battery Inverter List (data unchanged since October 1, 2026; downloaded October 11, 2026) under SRNE Solar Co.,Ltd, as "HESP48120U200-H {208V}"; "HESP48120U200-H {240V}", CEC listing date 2024-03-11. This is an equipment listing, not UL certification or complete-system approval.
Product / system scope unresolved. Model HESP48120U200-H listed on the California Energy Commission Grid Support Solar Inverter List (data unchanged since October 1, 2026; downloaded October 11, 2026) under SRNE Solar Co.,Ltd, as "HESP48120U200-H {208V}"; "HESP48120U200-H {240V}", CEC listing date 2024-03-11. This is an equipment listing, not UL certification or complete-system approval.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.