Manufacturer claim; issuer verification pending. Applies to the exact inverter.
Photo sources
Manufacturer and seller images. Configuration examples may include additional equipment.
Image source: Schneider Electric Conext SW 4048 120/240, figure from the maker's own document "Schneider Electric's own Conext SW Inverter/Charger owner's guide for the 120/240 V models, document 975-0638-01-01 Rev E (July 2015), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017.", in the entry that lists this part number. Drawing. Figure from the manufacturer's document, page 1.Inverter charger
Schneider Electric Conext SW 4048 120/240 Split-phase (865-4048)
Key specs
Converted: 3800 W / 1000 W per kW = 3.8 kW
All specifications
Identity
SKU detail
No spec by that name.
| Field | Value | Conditions | Source |
|---|---|---|---|
| Weight | 30.5 kg / 67.2 lb converted Check note | The datasheet prints a lower weight. Schneider Electric's datasheet (DS20160624_ConextSW) prints "Product weight" as "28.1 kg (62.0 lb)" for the SW 4048 120/240. The Rev E owner's guide and installation guide print 67.2 lbs. (30.5 kg), which is recorded. Printed as "67.2 lbs. (30.5 kg)" unit net weight. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048.Where: Physical Specifications, Unit Net Weight row | [1] [2] |
| Peak output | 4400 W for 30 min; 7000 W for 5 s | Printed as 4400 W for 30 minutes (only when NoLoadVD is enabled) and 7000 W for 5 seconds, at 25 °C. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048. Where: Inverter Specifications, Continuous output power (AC) and Surge power rating rows | [1] [2] |
| AC voltage | 120/240 VAC | Printed as nominal voltage "120/240 VAC" single-phase/split-phase; the operating voltage range is 104/208 VAC to 127/254 VAC. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048. Where: Inverter Specifications, Nominal voltage single-phase/split-phase row | [1] [2] |
| Max charge | 45 A | Printed as "45 A" maximum charger output current. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048. Where: Charger Specifications, Maximum output current row; datasheet charger Output current row | [1] [2] [3] |
| Dimensions | W 343 × H 197 × L 387 mm / W 13.5 × H 7.76 × L 15.2 in converted Check note | The datasheet prints different dimensions. Schneider Electric's datasheet (DS20160624_ConextSW) prints "Product dimensions (H x W x D)" as "41.8 x 34.1 x 19.7 cm (16.5 x 13.4 x 7.6 in)". The Rev E owner's guide and installation guide print 387×343×197 mm (L × W × H), which is recorded. Printed as "15.2×13.5×7.6 in (387×343×197 mm)" (L × W × H); the millimeter figures are recorded. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048.Where: Physical Specifications, L × W × H row | [1] [2] |
| Efficiency | 98 % Check note | Other Schneider documents print 94%. The Rev E owner's guide (975-0638-01-01) and the Rev D installation guide (975-0639-01-01) both print "Peak efficiency 91.5% 92% 98%", so 98% is recorded for the SW 4048 120/240 (865-4048). Schneider Electric's datasheet of 2016 (DS20160624_ConextSW) prints "Optimal efficiency" as 94% for the SW 4048 120/240, and the 2020 revisions of the same guides, written for 865-4048-21, print 94%. Peak inverter efficiency, printed as "98%". Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048.Where: Inverter Specifications, Peak efficiency row | [1] [2] |
| AC frequency | 50 or 60 Hz (selectable); 60 Hz default | Printed as operating frequency range "selectable 50 or 60 Hz" and default output frequency "60 Hz". Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048. Where: Inverter Specifications, Operating frequency range and Default output frequency rows | [1] [2] |
| AC configuration | 120/240 V split phase (L1/L2 with neutral) | Printed as "AC OUTPUT connection Split-phase (L1/L2) Split-phase (L1/L2) Split-phase (L1/L2)"; "Nominal voltage single-phase/split-phase 120/240 VAC 120/240 VAC 120/240 VAC"; "The terminals are labeled OUTPUT N for Neutral and OUTPUT L1 and L2 for split-phase lines 1 and 2 respectively." in Schneider Electric's own Conext SW Inverter/Charger installation guide for the 120/240 V models, document 975-0639-01-01 Rev D (July 2015), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017. (PDF page 62; PDF page 23). Revised on 16 October 2026: Owner report 2026-10-16 (inverter filter AC output 120/240 V): the earlier text omitted the voltages the manual prints, so the unit fell out of the 120/240 V filter although one unit gives 120 V line to neutral and 240 V line to line. Where: PDF page 62; PDF page 23 | [2] |
| Enclosure rating | Indoor only, IP 20 | Printed as ingress protection rating "Indoor only, IP 20" for all models; manufacturer claim. Where: Environmental Specifications, Ingress protection rating row (all models) | [1] [2] |
| Transfer time | < 20 ms | Printed as "Transfer time—utility to invert < 20 ms" for all models. Where: AC Transfer Specifications, Transfer time row (all models) | [1] [2] |
| Nominal voltage | 48 V DC | Printed as "48 VDC" nominal output voltage. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048. Where: Charger Specifications, Nominal output voltage row | [1] [2] |
| Surge AC output | 7,000 W | Printed as "7000 W" surge power rating for 5 seconds. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048. Where: Inverter Specifications, Surge power rating (5 seconds) row | [1] [2] [3] |
| Grid passthrough | 30 A | Printed as relay current rating "30 A" for all models, with the footnote "Limited by SCP to 24 A due to CEC/NEC regulatory requirements." Where: AC Transfer Specifications, Relay current rating row (all models) | [1] [2] |
| Idle consumption | 27 W | Printed as "27 W" no-load power draw with the inverter on. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048. Where: Specifications, No-load power draw (Inverter On) row | [1] [2] |
| Max parallel units | 2 units | Printed as "multiple unit configuration (installation) is limited to two units - one master unit and one slave unit". The 2016 datasheet lists the Conext SW Stacking Kit 865-1019 for 120 / 240 Vac. The 2020 owner's guide for 865-4048-21 instead says operation of more than one Conext SW in a stack is not supported. Where: Introduction, Features (footnote 1) and Multiple Unit Configuration | [1] |
| Continuous output | 3.8 kWConverted: 3800 W / 1000 W per kW = 3.8 kW | Printed as "3800 W" maximum continuous output (footnote: only when NoLoadVD is enabled) and 4400 W for 30 minutes, at 25 °C. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048. Where: Specifications chapter, Inverter Specifications, Continuous output power (AC), SW 4048 120/240 column SourcesConverted: 3800 W / 1000 W per kW = 3.8 kW | [1] [2] [3] |
| Continuous AC output | 15.2 A | Printed as "15.2 A" maximum continuous output current; the inverter peak output current is 41 A. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048. Where: Inverter Specifications, Maximum continuous output current row | [1] [2] |
| Battery voltage range | 40 to 64 V Check note | The datasheet prints a wider range. Schneider Electric's datasheet (DS20160624_ConextSW) prints "Input DC voltage range" as "40 - 68 Vdc" for the SW 4048 120/240. The Rev E owner's guide and installation guide print 40–64 VDC, which is recorded. Printed as "40–64 VDC" DC input voltage range; the maximum continuous power voltage range is 46–48 VDC. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048.Where: Inverter Specifications, DC Input, Voltage range row | [1] [2] |
| Operating temperature | -20 to 60 °C / -4 to 140 °F converted | Printed as "–4 to 140 °F (–20 to 60 °C)", starting to derate above 77 °F (25 °C). Where: Environmental Specifications, Operating temperature range row (all models) | [1] [2] |
Owner reviews
Write a reviewSellers
No listed sellers in this data.
Price history
No seller price history.
Quick reference sheet
- Continuous output
- 3.8 kW
- Battery voltage
- 40 to 64 V
- Solar input
- Not statedMPPT trackers Not stated
- AC output
- 120/240 V split phase (L1/L2 with neutral)
- Warranty
- Not stated
- Size
- 26.15 L* (Calculated from published dimensions)W: 343 × H: 197 × L: 387 mm / W: 13.5 × H: 7.76 × L: 15.2 inWeight 30.5 kg / 67.2 lb
Evidence score
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Warranty term needed; Battery conversion efficiency needed.
Each input is scored against the best documented value for an inverter: warranty term and battery conversion efficiency against every published inverter, idle consumption (lower is better) against the inverters in the same output band, or against every published inverter when the output is not documented. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Researched products receive a score. Certificates earn points for the evidence itself. Size and weight do not affect scores.
27 against 1 W, the lowest documented for an inverter in the 3.5 to 7 kW output band (printed by the maker): Fronius Primo 3.8-1 208-240. The bar is a printed bound: less than 1 W, as printed.
Printed as "27 W" no-load power draw with the inverter on. Read from the SW 4048 120/240 column (the third column) of the owner's guide 975-0638-01-01 Rev E and the installation guide 975-0639-01-01 Rev D (both July 2015), which name the Conext SW 4048 120/240 as part number 865-4048.
Research pending, 0 points: Warranty term, Battery conversion efficiency.
Warranty term and battery conversion efficiency are compared with every published inverter; idle consumption with the inverters in the same 3.5 to 7 kW output band. · Method version 0.5
How it worksCertificates
CSA C22.2 No. 107.1-01manufacturer claimpresent at observation[1]
- Scope
- equipment listing
- Covered models
- 865-4048
- Limitations
- Printed in the Regulatory section of Schneider Electric's own owner's guide 975-0638-01-01 Rev E for all models it covers; no certificate number or issuer file number is given, so this is a manufacturer claim and not issuer-verified. Read on October 4, 2026.
- Record detail
- Issued: Not statedValid from: Not statedExpiry: Not statedNot checked
- Source
- [1]
UL 1741manufacturer claimpresent at observation[1]
- Scope
- equipment listing
- Covered models
- 865-4048
- Limitations
- Printed in the Regulatory section of Schneider Electric's own owner's guide 975-0638-01-01 Rev E for all models it covers; no certificate number or issuer file number is given, so this is a manufacturer claim and not issuer-verified. Read on October 4, 2026.
- Record detail
- Issued: Not statedValid from: Not statedExpiry: Not statedNot checked
- Source
- [1]
UL 1778manufacturer claimpresent at observation[1]
- Scope
- equipment listing
- Covered models
- 865-4048
- Limitations
- Printed in the Regulatory section of Schneider Electric's own owner's guide 975-0638-01-01 Rev E for all models it covers; no certificate number or issuer file number is given, so this is a manufacturer claim and not issuer-verified. Read on October 4, 2026.
- Record detail
- Issued: Not statedValid from: Not statedExpiry: Not statedNot checked
- Source
- [1]
Warranty
Unknown: no warranty facts recorded.
Recalls / legal notices
No recalls on file. All notices · Report a notice
This register is incomplete. A missing notice does not establish that a product has no recalls.
Documents
Manuals
- Schneider Electric's own Conext SW Inverter/Charger installation guide for the 120/240 V models, document 975-0639-01-01 Rev D (July 2015), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017.Open
Source details
Archived copy captured on 2026-10-04.
Location: Cover, Specifications chapter (pages 2-2 to 2-6)
Retrieved Oct 3, 2026
An Internet Archive copy, not a live file. Its cover names the Conext SW 4048 120/240 (865-4048); its Specifications chapter prints the same SW 4048 120/240 figures as the Rev E owner's guide of the same date.
Archived copies
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived backupRevision not recorded · 12.76 MBArchived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://web.archive.org/web/20170619141606id_/http://solar.schneider-electric.com/wp-content/uploads/2015/09/Conext-SW-NA-Installation-Guide-120-240VAC-975-0639-01-01_Rev-D_ENG.pdf. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: bf0331821455323f084b0d3a970bce878fded43a9133112484f7dcba5708df56
Datasheets
- Schneider Electric's own Conext SW inverter/charger datasheet, Technical Specifications - North America (DS20160624_ConextSW), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017.Open
Source details
Archived copy captured on 2026-10-04.
Location: Page 2, Technical Specifications - North America
Retrieved Oct 3, 2026
An Internet Archive copy, not a live file. It names part numbers 865-2524, 865-4024 and 865-4048. Used beside the owner's and installation guides; where they differ, the guides are recorded and the datasheet figure is named in a warning.
Archived copies
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived backupRevision not recorded · 0.91 MBArchived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://web.archive.org/web/20170619151704id_/http://solar.schneider-electric.com/wp-content/uploads/2016/06/Conext-SW_-Data-Sheet-NA.pdf. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: d0ea72912f5ac15495e53d5e03383a12b051db47c46c33b24547d7ec725a4c2c
Other documents
- Schneider Electric's own Conext SW Inverter/Charger owner's guide for the 120/240 V models, document 975-0638-01-01 Rev E (July 2015), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017.Open
Source details
Archived copy captured on 2026-10-04.
Location: Cover, Introduction, Specifications chapter (pages 6-2 to 6-6)
Retrieved Oct 3, 2026
An Internet Archive copy, not a live file: Schneider Electric no longer publishes this revision, and solar.se.com answered HTTP 403 to the research agent on October 4, 2026. Its cover names the Conext SW 4048 120/240 Split-phase (865-4048).
Archived copies
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived backupRevision not recorded · 6.17 MBArchived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://web.archive.org/web/20170619203809id_/http://solar.schneider-electric.com/wp-content/uploads/2015/09/Conext-SW-NA-Owners-Guide-120-240VAC-975-0638-01-01_Rev-E_ENG.pdf. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: 6f8a46c57164bd42b7e6d428684b8546b882f927f87c3c1d72deeced3a572336
Archive and older revisions
Archive and older revisions0
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
Schneider Electric's own Conext SW Inverter/Charger owner's guide for the 120/240 V models, document 975-0638-01-01 Rev E (July 2015), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017.
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://web.archive.org/web/20170619203809id_/http://solar.schneider-electric.com/wp-content/uploads/2015/09/Conext-SW-NA-Owners-Guide-120-240VAC-975-0638-01-01_Rev-E_ENG.pdf. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: 6f8a46c57164bd42b7e6d428684b8546b882f927f87c3c1d72deeced3a572336
Schneider Electric's own Conext SW Inverter/Charger installation guide for the 120/240 V models, document 975-0639-01-01 Rev D (July 2015), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017.
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://web.archive.org/web/20170619141606id_/http://solar.schneider-electric.com/wp-content/uploads/2015/09/Conext-SW-NA-Installation-Guide-120-240VAC-975-0639-01-01_Rev-D_ENG.pdf. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: bf0331821455323f084b0d3a970bce878fded43a9133112484f7dcba5708df56
Schneider Electric's own Conext SW inverter/charger datasheet, Technical Specifications - North America (DS20160624_ConextSW), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017.
Archived copy of a document published by Schneider Electric. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy, unaltered, kept as a record of what Schneider Electric published. Original address: https://web.archive.org/web/20170619151704id_/http://solar.schneider-electric.com/wp-content/uploads/2016/06/Conext-SW_-Data-Sheet-NA.pdf. Copyright and takedown
File details
Original sourceEmbedded dates are file metadata, not independent proof of publication.
SHA-256: d0ea72912f5ac15495e53d5e03383a12b051db47c46c33b24547d7ec725a4c2c
Parts and accessories
No sourced accessories or replacement parts listed yet.
Model history
Model identity
- Model
- Conext SW 4048 120/240
Manufacturer SKU 865-4048
No historical observations recorded yet.
Other recorded fields
| Field | Value | Conditions | Source |
|---|---|---|---|
| Evidence breakdown | method version: inverters-0.5-personal documented pct: 55 basis: Unknown missing: Warranty term needed Battery conversion efficiency needed criteria: key: certificates label: Certificates value: 22.75 unit: Unknown shown: UL 1741 · UL 1778 +1 shown detail: Claimed state: claimed points: 10.2 ceiling: 45 weight: 45 share: 22.8 covered: yes missing: no folded: no reason: Unknown reason text: Unknown note: Manufacturer claim; issuer verification pending. Applies to the exact inverter. display note: Unknown Sources: [1] key: warranty label: Warranty term value: Unknown unit: Unknown shown: Research pending shown detail: Unknown state: pending points: 0 ceiling: 30 weight: 30 share: Unknown covered: no missing: yes folded: yes reason: undocumented reason text: Not documented. Undisclosed data scores 0. note: Not documented. display note: Unknown Sources: No source on record key: efficiency label: Battery conversion efficiency value: Unknown unit: Unknown shown: Research pending shown detail: Unknown state: pending points: 0 ceiling: 15 weight: 15 share: Unknown covered: no missing: yes folded: yes reason: undocumented reason text: Not documented. Undisclosed data scores 0. note: Not documented. display note: Unknown Sources: No source on record | ||
Community discussions
No discussions linked yet. Search DIY Solar Forum
Sources
- Schneider Electric's own Conext SW Inverter/Charger owner's guide for the 120/240 V models, document 975-0638-01-01 Rev E (July 2015), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017. (Schneider Electric · manufacturer · observed Oct 3, 2026)
- Schneider Electric's own Conext SW Inverter/Charger installation guide for the 120/240 V models, document 975-0639-01-01 Rev D (July 2015), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017. (Schneider Electric · manufacturer · observed Oct 3, 2026)
- Schneider Electric's own Conext SW inverter/charger datasheet, Technical Specifications - North America (DS20160624_ConextSW), Internet Archive copy of solar.schneider-electric.com captured June 19, 2017. (Schneider Electric · manufacturer · observed Oct 3, 2026)
Sign in to report an error on this page
Similar products
All with a priceVictron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX
Victron MultiPlus-II 48/5000 120V
Victron Quattro 48/5000 120V
BLUETTI RV5 Power Hub
* Missing details