conditions: Printed as "SKU: RIV1230PU-126-US" on Renogy's US product page, captured on October 13, 2026. The user manual prints the model as RIV1230PU-126 without the region suffix.
Printed in the user manual as "Surge Rating (after 2S the overload protection) 2000W (@2s) 4000W (@2s) 6000W (@2s)"; 6000 W for 2 seconds in the 3000W column.
The user manual prints "Inverter Efficiency 92%, MAX" and "Full Load Efficiency 87%"; the product page prints "Inverter Efficiency >92%" and "Full Load Efficiency >87%". The manual's maximum figure is recorded.
Where: User manual printed page 22, Specifications, Inverter Efficiency
Printed as "Output Waveform Pure Sine Wave" in the maker's document "Renogy 12V 1000W/2000W/3000W Pure Sine Wave Inverter with Transfer Switch user manual, RIV1210PU-126/RIV1220PU-126/RIV1230PU-126, version A3 (PDF)".
Where: Renogy 12V 1000W/2000W/3000W Pure Sine Wave Inverter with Transfer Switch user manual, RIV1210PU-126/RIV1220PU-126/RIV1230PU-126, version A3 (PDF), PDF page 24, Output Waveform row; spec-table row
The user manual prints "Surge Rating (after 2S the overload protection) 2000W (@2s) 4000W (@2s) 6000W (@2s)"; 6000 W for 2 seconds in the 3000W column.
The user manual prints "Continuous Output Power 1000W 2000W 3000W" for the RIV1210PU-126, RIV1220PU-126 and RIV1230PU-126; the 3000 W figure in the 3000W column is recorded as 3 kW (3000 W / 1000). The product page prints a continuous output power of 3000W.
I like this inverter, it has worked reliably for us. We initially had some issues, but ultimately it was due too small of wires between the inverter and the batteries causing too much resistance. The one downside to this inverter, for RV applications with that the transfer switch is too weak for most RV applications. I believe it maxes out at 25 amps, meaning if you have a 50 amp or 30 RV, you cannot make use of the full shore power wattage. I ended up installing a dedicated automatic transfer switch outside of the inverter itself. It would also be nice if the inverter could charge batteries, but it cannot.
I installed it in July 2026 as a UPS for my fridge.
It uses 2 12v lifpo4 batteries in parallel. Hardwired to a 20a 110v power input and output to a power strip. Once I wired it up, it worked. As long as it sees ~12v on the batter input, it will work. If you loose 12v power source, the AC will not work (as a UPS)
I have it hooked up to the Renogy app on my phone and home assistant using a little Esp32 Bluetooth proxy.
Not a single issue so far.
12.27 L* (Calculated from published dimensions)W: 263.4 × H: 95.3 × L: 488.8 mm / W: 10.37 × H: 3.75 × L: 19.24 inWeight6.7 kg / 15 lb
Evidence score
6/100Missing details40% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Certificate evidence needed; Battery conversion efficiency needed.
Each input is scored against the best documented value for an inverter: warranty term and battery conversion efficiency against every published inverter, idle consumption (lower is better) against the inverters in the same output band, or against every published inverter when the output is not documented. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Researched products receive a score. Certificates earn points for the evidence itself. Size and weight do not affect scores.
Warranty term1 year1.2 / 30.0
1 of 25 years, the best documented for an inverter (printed by the maker): APsystems DS3
Printed as "Material and workmanship warranty 1 Year" on the RIV1230PU-126-US product page, captured on October 13, 2026.
18 against 8 W, the lowest documented for an inverter in the 1.5 to 3.5 kW output band (printed by the maker): Victron Energy Inverter 12/2000 Smart
The user manual prints "Power Consumption < 12W < 18W < 18W"; under 18 W in the 3000W column, an upper bound. Printed as a bound: less than 18 W, as printed.
Research pending, 0 points: Certificates, Battery conversion efficiency.
Warranty term and battery conversion efficiency are compared with every published inverter; idle consumption with the inverters in the same 1.5 to 3.5 kW output band. · Method version 0.5
Location: Cover; printed pages 21 and 22, Specifications
Retrieved Oct 12, 2026
Renogy's user manual for the three inverters with transfer switch, version A3 dated June 30, 2025, linked from their US product pages and captured on October 13, 2026. Its Specifications table (printed page 22) prints one column per model in the order 1000W, 2000W, 3000W; its general data prints dimensions and weight in the same order. Manufacturer claims, not independent tests.
Archived copies
Archived copy of a document published by Renogy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Location: SKU line; Specs, General Information and Electrical Information
Retrieved Oct 12, 2026
Renogy's own US store page selling the 3000W, 2000W and 1000W inverters with UPS transfer switch as variants, captured on October 13, 2026 with the 3000W variant selected by default. It prints that variant's SKU, a 3000W specifications list and the warranty term, and links the shared user manual. Manufacturer claims, not independent tests; the page carries no revision date.
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
Renogy 12V 1000W/2000W/3000W Pure Sine Wave Inverter with Transfer Switch user manual, RIV1210PU-126/RIV1220PU-126/RIV1230PU-126, version A3 (PDF)
Archived copy of a document published by Renogy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].