Charged Reviews · Quick reference
Enphase IQ8HC Microinverter IQ8HC-72-M-DOM-US
- Brand
- Enphase
- Model
- IQ8HC-72-M-DOM-US
- SKU / part number
- IQ8HC-72-M-DOM-US [1]
- Category
- Inverters
chargedreviews.com/inverters/enphase-iq8hc-72-m-dom-us
AC output
- Continuous output
- 0.384 kW [1]
- Peak output
- 384 VA @ 240 VAC; 366 VA @ 208 VAC [2]
- AC configuration
- 240 V split-phase (L-L) or 208 V single-phase (L-L) [2]
- AC output voltage
- Split-phase (L-L), 180° @ 240 VAC; Single-phase (L-L), 120° @ 208 VAC [2]
- AC frequency
- 60 Hz (nominal); extended frequency range 47-68 Hz [2]
- Grid pass-through
- ?
- Maximum output per leg
- ?
Battery
- Battery voltage
- ?
- Battery voltage range
- 18 to 58 V [2]
- Maximum charge current
- ?
- Maximum discharge current
- ?
- Battery-only output
- ?
- Maximum grid charging
- ?
- Compatible batteries / BMS
- ?
PV input
- PV array limit (connected)
- ?
- PV input limit (converted)
- ?
- MPPT trackers
- ?
- String inputs per MPPT
- ?
- PV short-circuit current
- 25 A [2]
- PV startup voltage
- ?
Efficiency and modes
Communication and environment
- Communications
- ?
- Enclosure rating
- NEMA Type 6 [1]
- Operating noise
- ?
Mechanical
Installation (from the manual)
Protection
- AC input breaker
- ?
- AC output breaker
- AC side protection requires a maximum of 20 A per branch circuit [2]
- Battery fuse or breaker
- ?
- PV disconnect
- ?
Clearances and orientation
- Installation clearances
- At least 1.9 cm (3/4 in) between the roof and the microinverter and 1.3 cm (1/2 in) between the back of the PV module and the top of the microinverter; for a vertical mount, more than 30 cm (12 in) from the edges of the PV module [2]
- Mounting orientation
- Under the PV module, horizontally bracket side up or vertically; never upside down [2]
Grounding
- Grounding and neutral-ground bonding
- No grounding electrode conductor, equipment grounding conductor or grounded conductor (neutral) required; Class II double-insulated with ground fault protection; the AHJ may require bonding the mounting bracket to the racking [2]
Not in the manual: Torque, Conductors, Communication