Manufacturer and seller images. Configuration examples may include additional equipment.
Image source: JK-B2A32SRP relay-version BMS in its housing, with the model name and ratings Jikong prints beside it, from Jikong's own store page for this modelNo sellers found.
Printed as "JK-B2A32SRP" in the title of Jikong's own store page; Jikong's specification prints the same model as "JK-B2A32S-RP". The Amazon listing was only a lead.
Official product page: Jikong Technology Official Store: JK BMS B2A32SRP | 300A Continuous Discharge | 2A Active Balancer | 8S-32S LiFePO4/Li-ion/LTO Smart BMS (October 21, 2026 capture) Checked · Earlier documentLocation: Product title
Documented
Converted: 1280 g / 1000 g per kg = 1.28 kg
Printed as "成品重量 (Finished weight) 1280 g" in the basic parameter table.
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Basic parameter table, section 4.1, PDF page 20
Converted
Printed in the specification's adaptation guide as 7～32 strings for ternary lithium, 8～32 for lithium iron and 14～32 for lithium titanate batteries; the store page prints "Series 8-32S".
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentOfficial product page: Jikong Technology Official Store: JK BMS B2A32SRP | 300A Continuous Discharge | 2A Active Balancer | 8S-32S LiFePO4/Li-ion/LTO Smart BMS (October 21, 2026 capture) Checked · Earlier documentLocation: Product adaptation guide, section 2.2, PDF page 9; store page additional information table
Documented
Printed as "保护板尺寸 (Protective plate size) 234.6*157.5*30.5 mm" in the basic parameter table and as 234.6mm×157.5mm×30.5mm in section 5.3; the figures are not labeled by axis, so they are stored in the order printed.
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Basic parameter table, PDF page 20; section 5.3, PDF page 29
Calculated
Printed in the function configuration table as "蓝牙功能 (Bluetooth function)", "UART接口 (UART interface)", "RS485", "CAN" and "显示屏接口 (Display interface)", each "标配 (Standard option)"; the store page prints "Communication ACC, Bluetooth, CAN, Display, Heating Function, RS485, UART".
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentOfficial product page: Jikong Technology Official Store: JK BMS B2A32SRP | 300A Continuous Discharge | 2A Active Balancer | 8S-32S LiFePO4/Li-ion/LTO Smart BMS (October 21, 2026 capture) Checked · Earlier documentLocation: Product function configuration table, section 2.1, PDF page 8; store page additional information table
Documented
Printed as "加热功能 (Heating function) 标配 (Standard option)" in the function configuration table and "The designed heating current is 10A." in section 3.4, which recommends heating wire of no less than 16 AWG.
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Product function configuration table, section 2.1; section 3.4, Heating function
Documented
Printed on the cover as "Lithium battery active balancing protection board".
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Cover
Documented
Printed as "最大均衡电流 (Maximum balancing current) 2 A" in the basic parameter table; the store page prints "Balance Current 2A".
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentOfficial product page: Jikong Technology Official Store: JK BMS B2A32SRP | 300A Continuous Discharge | 2A Active Balancer | 8S-32S LiFePO4/Li-ion/LTO Smart BMS (October 21, 2026 capture) Checked · Earlier documentLocation: Basic parameter table, section 4.1, PDF page 20
Documented
Printed as "最大充电电流 (Maximum charging current) 300 A" in the basic parameter table, with the note "Replacing the shunt resistor allows for a higher charging current."
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Basic parameter table, section 4.1, PDF page 20
Documented
Converted: 1280 g / 1000 g per kg = 1.28 kg
Printed as "成品重量 (Finished weight) 1280 g" in the basic parameter table.
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Basic parameter table, section 4.1, PDF page 20
Converted
Printed in the specification's adaptation guide as 7～32 strings for ternary lithium, 8～32 for lithium iron and 14～32 for lithium titanate batteries; the store page prints "Series 8-32S".
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentOfficial product page: Jikong Technology Official Store: JK BMS B2A32SRP | 300A Continuous Discharge | 2A Active Balancer | 8S-32S LiFePO4/Li-ion/LTO Smart BMS (October 21, 2026 capture) Checked · Earlier documentLocation: Product adaptation guide, section 2.2, PDF page 9; store page additional information table
Documented
Printed as "保护板尺寸 (Protective plate size) 234.6*157.5*30.5 mm" in the basic parameter table and as 234.6mm×157.5mm×30.5mm in section 5.3; the figures are not labeled by axis, so they are stored in the order printed.
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Basic parameter table, PDF page 20; section 5.3, PDF page 29
Documented
Printed in the function configuration table as "蓝牙功能 (Bluetooth function)", "UART接口 (UART interface)", "RS485", "CAN" and "显示屏接口 (Display interface)", each "标配 (Standard option)"; the store page prints "Communication ACC, Bluetooth, CAN, Display, Heating Function, RS485, UART".
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentOfficial product page: Jikong Technology Official Store: JK BMS B2A32SRP | 300A Continuous Discharge | 2A Active Balancer | 8S-32S LiFePO4/Li-ion/LTO Smart BMS (October 21, 2026 capture) Checked · Earlier documentLocation: Product function configuration table, section 2.1, PDF page 8; store page additional information table
Documented
Printed as "加热功能 (Heating function) 标配 (Standard option)" in the function configuration table and "The designed heating current is 10A." in section 3.4, which recommends heating wire of no less than 16 AWG.
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Product function configuration table, section 2.1; section 3.4, Heating function
Documented
Printed on the cover as "Lithium battery active balancing protection board".
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Cover
Documented
Printed as "最大均衡电流 (Maximum balancing current) 2 A" in the basic parameter table; the store page prints "Balance Current 2A".
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentOfficial product page: Jikong Technology Official Store: JK BMS B2A32SRP | 300A Continuous Discharge | 2A Active Balancer | 8S-32S LiFePO4/Li-ion/LTO Smart BMS (October 21, 2026 capture) Checked · Earlier documentLocation: Basic parameter table, section 4.1, PDF page 20
Documented
Printed as "最大充电电流 (Maximum charging current) 300 A" in the basic parameter table, with the note "Replacing the shunt resistor allows for a higher charging current."
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Basic parameter table, section 4.1, PDF page 20
Documented
Printed in the adaptation guide as "三元锂电池 (Ternary lithium battery)", "铁锂电池 (Lithium iron battery)" and "钛酸锂电池 (Lithium titanate battery)".
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Product adaptation guide, section 2.2, PDF page 9
Documented
Printed as "最大放电电流 (Maximum discharge current) 300 A" in the basic parameter table, with the note "Replacing the shunt resistor allows for a higher discharging current."; the store page prints "Continuous Discharge 300A". No duration is printed.
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentOfficial product page: Jikong Technology Official Store: JK BMS B2A32SRP | 300A Continuous Discharge | 2A Active Balancer | 8S-32S LiFePO4/Li-ion/LTO Smart BMS (October 21, 2026 capture) Checked · Earlier documentLocation: Basic parameter table, section 4.1, PDF page 20
Documented
Printed as "工作温度 (Operating temperature) -30-70 ℃" in the basic parameter table.
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentLocation: Basic parameter table, section 4.1, PDF page 20
Documented
Published claims and calculations, not independent test results.
Archived copy captured on 2026-10-21.
Location: Sections 2.1, 2.2, 3.4, 4.1 and 5.3 (PDF pages 8, 9, 11, 20 and 29)
Retrieved
Jikong Technology's own bilingual (Chinese and English) specification for its JK-B2A32S-RP relay-version board, version 20.1.1, downloaded from the Specifications list of jkbms.com's support page and linked from the JK-B2A32SRP store page; captured October 21, 2026. Manufacturer claims, not independent tests.
Archived copy of a document published by Chengdu Jikong Technology Co., Ltd. (JK BMS). Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.
Archived copy, unaltered, kept as a record of what Chengdu Jikong Technology Co., Ltd. (JK BMS) published. Original address: https://www.jkbms.com/wp-content/uploads/2026/03/JK-B2A32S-RP-Product-specification-V20.1.1.pdf. Copyright and takedown
Embedded dates are file metadata, not independent proof of publication.
SHA-256: da864b9d40198857e648a6e8e8bda9d44f7fe097540eb8aae848b1643685fad5
Archived copy captured on 2026-10-21.
Location: Product title, technical specifications list and additional information table
Retrieved
Jikong Technology's own product page for this model on its official store (shop.jkbms.com), captured October 21, 2026. A product page with marketing text, a short technical list and an additional-information table, not a datasheet; customer reviews on the page are not used.
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived copy of a document published by Chengdu Jikong Technology Co., Ltd. (JK BMS). Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.
Archived copy, unaltered, kept as a record of what Chengdu Jikong Technology Co., Ltd. (JK BMS) published. Original address: https://www.jkbms.com/wp-content/uploads/2026/03/JK-B2A32S-RP-Product-specification-V20.1.1.pdf. Copyright and takedown
Embedded dates are file metadata, not independent proof of publication.
SHA-256: da864b9d40198857e648a6e8e8bda9d44f7fe097540eb8aae848b1643685fad5
No warranty terms on file.
No sellers found.
No seller price history.
No reviews yet
Own one? A verified review needs a receipt and a serial number photo, and counts 19× in the owner rating.
This category has no Evidence score.
No certificates on file. Certificate guide
No sourced accessories or replacement parts listed yet.
Hyphenated form Jikong prints in its specification (cover and section 2.2) for this model.
Official datasheet: JK-B2A32S-RP Product specification, Version 20.1.1 Rev 20.1.1 · Checked · Earlier documentManufacturer SKU JK-B2A32SRP
No historical observations recorded yet.
No discussions linked yet. Search DIY Solar Forum
No recalls or legal notices on file; this is not a complete recall or court search. All notices · Report a notice
1.0 (1)Something wrong that is not one of the values above?
Prices · price basis. * Calculated; estimates labeled. Value needs confirmation; select it for the reason.
