Charged Reviews

No product photos yet.

Enphase ETD Replacement Cable Adapter, single connector (ETD-CR-SS)

By EnphaseSKU ETD-CR-SS

Connectors
No reviews · Write the first
Write a review
ConnectorSingle-segment replacement adapter with Field Wireable QD Connectors at all three endsWire size12 AWG trunk, 10 AWG drop (4-core each)Current ratingNot statedVoltage ratingNot statedEnclosureNot statedCompatible seriesEngage Cable (legacy M/S-Series Microinverters)

Key specs

Units
SKU
ETD-CR-SS
Official instruction manual
Sources

Enphase's own code for this product, printed in the guide's model line and as the SKU on Enphase's US store page.

Official instruction manual: Enphase Engage Trunk and Drop (ETD) Cable replacement adapter quick install guide, 140-00436-01 (May 2025) (November 3, 2026 capture) Rev 140-00436-01 · Checked · Earlier documentOfficial product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: ETD Cable replacement adapter quick install guide (140-00436-01) PDF page 1; Enphase US store page for ETD-CR-SS, model line and store SKU line

Documented

Weight
8.16 kg18 lb converted
Converted: 18 lb x 0.45359237 kg/lb
Official product page
Sources

Converted: 18 lb x 0.45359237 kg/lb

Printed as "Weight: 18 lbs" on Enphase's US store page; converted from pounds. The guide prints no weight. The 1.3 lbs and 2.6 lbs on the ETD-CR-10-BULK and ETD-CR-17-BULK pages are per drop of those bulk cables, other codes, so they do not conflict with this figure.

Official product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: Store page, Technical specifications

Converted

Wire size
12 AWG trunk, 10 AWG drop (4-core each)
Official product page
Sources

Printed as trunk cable conductor size 4-Core 12 AWG and drop cable conductor size 4-Core 10 AWG.

Official product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: Store page, Technical specifications

Documented

Connector
Single-segment replacement adapter with Field Wireable QD Connectors at all three ends
Official instruction manual
Sources

Printed in the guide's list of configurations and on the store page; the male connectors come pre-installed at all three ends and three female connectors are supplied separately.

Official instruction manual: Enphase Engage Trunk and Drop (ETD) Cable replacement adapter quick install guide, 140-00436-01 (May 2025) (November 3, 2026 capture) Rev 140-00436-01 · Checked · Earlier documentOfficial product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: ETD Cable replacement adapter quick install guide (140-00436-01) PDF page 1; Enphase US store page for ETD-CR-SS, configurations; Details

Documented

Compatible series
Engage Cable (legacy M/S-Series Microinverters)
Official instruction manual
Sources

Printed as a replacement for existing Engage cables; the store page lists legacy M/S-Series Microinverters.

Official instruction manual: Enphase Engage Trunk and Drop (ETD) Cable replacement adapter quick install guide, 140-00436-01 (May 2025) (November 3, 2026 capture) Rev 140-00436-01 · Checked · Earlier documentOfficial product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: ETD Cable replacement adapter quick install guide (140-00436-01) PDF page 1; Enphase US store page for ETD-CR-SS, introduction; Compatibility

Documented

Included equipment
ETD Replacement Cable Adapter with pre-installed Field Wireable QD Connectors (male); Field Wireable QD Connectors (female)
Official product page
Sources

Printed in the what's in the box list; the description says three female connectors are supplied separately.

Official product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: Store page, What's in the box

Documented

Certifications (as printed)
UL 9703
Official product page
Sources

The store page's Details section prints "Compliance to UL9703." for this replacement cable solution. Manufacturer claim on a store page; no issuer directory was checked.

Official product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: Store page, Details

Documented

All specs6
Weight
8.16 kg18 lb converted
Converted: 18 lb x 0.45359237 kg/lb
Official product page
Sources

Converted: 18 lb x 0.45359237 kg/lb

Printed as "Weight: 18 lbs" on Enphase's US store page; converted from pounds. The guide prints no weight. The 1.3 lbs and 2.6 lbs on the ETD-CR-10-BULK and ETD-CR-17-BULK pages are per drop of those bulk cables, other codes, so they do not conflict with this figure.

Official product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: Store page, Technical specifications

Converted

Wire size
12 AWG trunk, 10 AWG drop (4-core each)
Official product page
Sources

Printed as trunk cable conductor size 4-Core 12 AWG and drop cable conductor size 4-Core 10 AWG.

Official product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: Store page, Technical specifications

Documented

Connector
Single-segment replacement adapter with Field Wireable QD Connectors at all three ends
Official instruction manual
Sources

Printed in the guide's list of configurations and on the store page; the male connectors come pre-installed at all three ends and three female connectors are supplied separately.

Official instruction manual: Enphase Engage Trunk and Drop (ETD) Cable replacement adapter quick install guide, 140-00436-01 (May 2025) (November 3, 2026 capture) Rev 140-00436-01 · Checked · Earlier documentOfficial product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: ETD Cable replacement adapter quick install guide (140-00436-01) PDF page 1; Enphase US store page for ETD-CR-SS, configurations; Details

Documented

Compatible series
Engage Cable (legacy M/S-Series Microinverters)
Official instruction manual
Sources

Printed as a replacement for existing Engage cables; the store page lists legacy M/S-Series Microinverters.

Official instruction manual: Enphase Engage Trunk and Drop (ETD) Cable replacement adapter quick install guide, 140-00436-01 (May 2025) (November 3, 2026 capture) Rev 140-00436-01 · Checked · Earlier documentOfficial product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: ETD Cable replacement adapter quick install guide (140-00436-01) PDF page 1; Enphase US store page for ETD-CR-SS, introduction; Compatibility

Documented

Included equipment
ETD Replacement Cable Adapter with pre-installed Field Wireable QD Connectors (male); Field Wireable QD Connectors (female)
Official product page
Sources

Printed in the what's in the box list; the description says three female connectors are supplied separately.

Official product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: Store page, What's in the box

Documented

Certifications (as printed)
UL 9703
Official product page
Sources

The store page's Details section prints "Compliance to UL9703." for this replacement cable solution. Manufacturer claim on a store page; no issuer directory was checked.

Official product page: Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture) Checked · Earlier document

Location: Store page, Details

Documented

Published claims and calculations, not independent test results.

Documents

2 on file
  • WEB
    Enphase Engage Trunk and Drop (ETD) Cable replacement adapter quick install guide, 140-00436-01 (May 2025) (November 3, 2026 capture)OfficialEnphase Energy, Inc.Official instruction manual
    Source details
    Revision
    140-00436-01
    Revision date
    Not stated

    Linked from Enphase's ETD replacement cable store pages; captured 2026-11-03T05:38:51.089Z (archived copy).

    Location: PDF page 1, model line, configurations, Preparation and parts

    Retrieved

    Enphase's quick install guide for the Engage Trunk and Drop (ETD) Cable replacement adapter (140-00436-01), whose model line names ETD-CR-SS, ETD-CR-10-BULK and ETD-CR-17-BULK, linked from the Documentation section of Enphase's ETD replacement cable store pages and fetched directly from enphase.com with the paced research fetcher on November 3, 2026 (robots.txt checked first; request ended 05:38:51.089 UTC). Manufacturer claims, not independent tests.

    Archived copies

    Archived copy of a document published by Enphase Energy, Inc.. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.

    Archived backup 140-00436-01 · 0.45 MB

    Archived copy, unaltered, kept as a record of what Enphase Energy, Inc. published. Original address: https://enphase.com/download/etd-cable-replacement-adapter-quick-install-guide. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Pages
    8
    Embedded creation date
    Embedded modification date

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: 4bd31b5e670b37058e9c655d6fcf63a65d3fc80336f9716dd8aacd9b7a725a1e

    Open
  • WEB
    Enphase US store page: ETD Replacement Cable Adapter (single connector), SKU ETD-CR-SS (November 3, 2026 capture)OfficialEnphase Energy, Inc.Official product page
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Enphase US store; captured 2026-11-03T03:35:33.509Z.

    Location: SKU line, Details, Technical specifications, Compatibility and What's in the box

    Retrieved

    Enphase's own US store page for SKU ETD-CR-SS, fetched directly from enphase.com with the paced research fetcher on November 3, 2026 (robots.txt checked first; request ended 03:35:33.509 UTC). A store page is the lowest-priority maker source: values are used exactly as the page prints them, and the price, stock state and images are not used. Manufacturer claims, not independent tests.

    Open

Archive and older revisions

Archive and older revisions0

Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.

Archived documents

Enphase Engage Trunk and Drop (ETD) Cable replacement adapter quick install guide, 140-00436-01 (May 2025) (November 3, 2026 capture)

Archived copy of a document published by Enphase Energy, Inc.. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.

Archived backup 140-00436-01 · 0.45 MB

Archived copy, unaltered, kept as a record of what Enphase Energy, Inc. published. Original address: https://enphase.com/download/etd-cable-replacement-adapter-quick-install-guide. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Pages
8
Embedded creation date
Embedded modification date

Embedded dates are file metadata, not independent proof of publication.

SHA-256: 4bd31b5e670b37058e9c655d6fcf63a65d3fc80336f9716dd8aacd9b7a725a1e

Submit a document

Warranty

No warranty terms on file.

Sellers

No sellers found.

Report a missing or wrong seller

Price history

No seller price history.

Owner reviews

No reviews yet

Own one? A verified review needs a receipt and a serial number photo, and counts 19× in the owner rating.

Write a review

Your reviews · Review policy

Evidence score

This category has no Evidence score.

Certificates

No certificates on file. Certificate guide

Parts and accessories

No sourced accessories or replacement parts listed yet.

Model history

Model identity

Model
ETD-CR-SS

Manufacturer SKU ETD-CR-SS · US market

No historical observations recorded yet.

Community discussions

No discussions linked yet. Search DIY Solar Forum

Recalls / legal notices

No recalls or legal notices on file; this is not a complete recall or court search. All notices · Report a notice

EnphaseProducts, reviews and history
No reviews

Something wrong that is not one of the values above?

Prices · price basis. * Calculated; estimates labeled. Value needs confirmation; select it for the reason.