Charged Reviews
Quick reference
Morningstar ProStar MPPT 40A Solar Controller
Model: PS-MPPT-40 · SKU: PS-MPPT-40
Prepared
Common specifications
| Field | Value | Sources |
|---|---|---|
| Controller type | MPPT | [1] |
| Max PV voltage | 120 V | [2] [1] |
| Max PV input power | 1100W / 1400W W | [1] |
| Max PV input power | 12: 700, 24: 1,400 W | [1] |
| Max PV current | ? | |
| Charge current | 40 A | [2] [1] |
| Battery voltage | 12V or 24V | [1] |
| Supported chemistry | Sealed; AGM/Flooded; Flooded; L-16; Custom | [2] |
| Efficiency | 97.3 % Needs confirmation | [2] |
| MPPT tracking efficiency | ? | |
| Max conversion efficiency | ? | |
| Full load efficiency | ? | |
| Charger efficiency | ? | |
| Weighted efficiency | ? | |
| Rated charge power | ? | |
| Load output | 30 A | [2] [1] |
| Self consumption | ~0.6W (no meter) ~1.0W (w/backlit meter) | [2] |
| Enclosure rating | IP20, Type 1 | [1] |
| Listing | UL1741; CSA C22.2#107.1-01; UL121201/CSA C22.2 #213; IEC/EN 62109-1 | [2] |
| Enclosure volume | 2.72 L Calculated | [2] |
| Warranty term | 5 years | [1] |
All recorded specifications
| Field | Value | Sources |
|---|---|---|
| Listing | UL1741; CSA C22.2#107.1-01; UL121201/CSA C22.2 #213; IEC/EN 62109-1 | [2] |
| Grounding | Use copper wire to connect the grounding terminal in the case, and other dead metal, to earth ground.; DO NOT bond DC system electrical negative to earth grounding terminal on the controller. | [2] |
| Weight | 1.4 kg | [1] |
| PV wire size | #14 - 2 AWG (2.5 - 33.6 mm2); maximum #6 AWG (16 mm2) with the standard terminal cover | [2] |
| Clearances | at least 15 cm (6 in) of space above and below the controller, and 50 mm (2 in) at the sides | [2] |
| Dimensions | W 200 × L 194 × D 70 mm / W 7.87 × L 7.62 × D 2.76 in Needs confirmation | [2] |
| Load output | 30 A | [2] [1] |
| PV disconnect | 50 Amps | [2] |
| Communications | MeterBus, MODBUS, SNMP (enabled through EMC-1) | [1] |
| Efficiency | 97.3 % Needs confirmation | [2] |
| Controller type | MPPT | [1] |
| Charge current | 40 A | [2] [1] |
| Enclosure rating | IP20, Type 1 | [1] |
| Ground wire size | 10 AWG (5 mm2) | [2] |
| Max PV voltage | 120 V | [2] [1] |
| Battery voltage | 12V or 24V | [1] |
| Battery wire size | 8 AWG at 30ºC, 6 AWG above 35°C, 4 AWG above 45°C (raceway, cable, or earth); 8 AWG (free air); 10-18 mm2 | [2] |
| Battery protection | 50 Amps | [2] |
| Max PV input power | 1100W / 1400W W | [1] |
| PV terminal torque | 35 in-lb | [2] |
| Self consumption | ~0.6W (no meter) ~1.0W (w/backlit meter) | [2] |
| Communication ports | MeterBus port (RJ-11) | [2] |
| Supported chemistry | Sealed; AGM/Flooded; Flooded; L-16; Custom | [2] |
| Max PV input power | 12: 700, 24: 1,400 W | [1] |
| Mounting orientation | vertical surface; heat sink fins up and down | [2] |
| Battery terminal torque | 35 in-lb | [2] |
| Battery voltage range | 10-35 Volts | [2] |
| Operating temperature | -40°C to +60°C | [2] [1] |
Warranty
| Field | Value | Sources |
|---|---|---|
| Warranty term | 5 years | [1] |
Certificate records
| Standard | Record | Evidence | Sources |
|---|---|---|---|
| UL 1741 | Claimed · present at observation | [1] | |
| CSA C22.2 No.107.1 | Claimed · present at observation | [1] | |
| IEC 62109-1 | Claimed · present at observation | [1] | |
| FCC Part-15 Class B | Claimed · present at observation | [1] | |
| UL121201/CSA C22.2 #213 | Claimed · present at observation | [1] | |
| ATEX | Claimed · present at observation | [1] | |
| IECEx | Claimed · present at observation | [1] |
Sources and revisions
- Morningstar's own ProStar MPPT datasheet, control #MS-001724 REV 01/2025.EN, from morningstarcorp.com's own ProStar MPPT product page. https://www.morningstarcorp.com/wp-content/uploads/datasheet-prostar-mppt-en.pdf
- Morningstar ProStar MPPT Solar Charging System Controller Installation, Operation and Maintenance Manual (MS-001537 v3.8) https://www.morningstarcorp.com/wp-content/uploads/operation-manual-prostar-mppt-en.pdf