Charged Reviews
Quick reference
Morningstar GenStar MPPT 100A DC System Controller
Model: GS-MPPT-100M-200V · SKU: GS-MPPT-100M-200V
Prepared
Common specifications
| Field | Value | Sources |
|---|---|---|
| Controller type | MPPT | [1] |
| Max PV voltage | 200 V | [2] [1] |
| Max PV input power | ? | |
| Max PV input power | ? | |
| Max PV current | 94/100 Amps | [2] |
| Charge current | 100 A | [2] [1] |
| Battery voltage | 12-24-48VDc | [1] |
| Supported chemistry | Sealed; Sealed / Flooded; LiFePO4 - Low; LiFePO4 - Medium; LiFePO4 High | [2] |
| Efficiency | 99 % | [1] |
| MPPT tracking efficiency | ? | |
| Max conversion efficiency | ? | |
| Full load efficiency | ? | |
| Charger efficiency | ? | |
| Weighted efficiency | ? | |
| Rated charge power | ? | |
| Load output | 30 A | [2] [1] |
| Self consumption | < 2.4 Watts (12/24V); < 3.2 Watts (48V) | [2] |
| Enclosure rating | IP20 | [1] |
| Listing | ? | |
| Enclosure volume | 13.62 L Calculated | [1] |
| Warranty term | ? |
All recorded specifications
| Field | Value | Sources |
|---|---|---|
| Grounding | Do not connect the negative system wire to the case grounding terminal.; the system electrical negative must be bonded through a GFPD to earth ground at only one point | [2] |
| Weight | 7.46 kg | [1] |
| PV wire size | 10 - 53.5 mm2 / #8 - 1/0 AWG | [2] |
| Clearances | at least 6" (150 mm) of space above and below the unit, and at least 3" (75 mm) around the heatsink | [2] |
| Dimensions | W 222 × H 360.4 × D 170.2 mm / W 8.75 × H 14.2 × D 6.7 in | [1] |
| Load output | 30 A | [2] [1] |
| PV disconnect | 125 Amps | [2] |
| Communications | SD Card (8 GB included), USB-C, RS232/EIA-485, Ethernet, Bluetooth Low Energy, MS-CAN | [1] |
| Efficiency | 99 % | [1] |
| MPPT voltage | > battery voltage + 1 Volt; < 180 Volts | [2] |
| Controller type | MPPT | [1] |
| Charge current | 100 A | [2] [1] |
| Enclosure rating | IP20 | [1] |
| Max PV current | 94/100 Amps | [2] |
| Max PV voltage | 200 V | [2] [1] |
| Battery voltage | 12-24-48VDc | [1] |
| Battery wire size | 10 - 53.5 mm2 / #8 - 1/0 AWG | [2] |
| Battery protection | 125 Amps | [2] |
| PV terminal torque | 100 in-lb | [2] |
| Self consumption | < 2.4 Watts (12/24V); < 3.2 Watts (48V) | [2] |
| Communication ports | SD Card; USB-C for data; RS-232 Port; EIA-485 Port; Ethernet/RJ-45 Port; Controller Area Network (CAN); Bluetooth Low Power | [2] |
| Supported chemistry | Sealed; Sealed / Flooded; LiFePO4 - Low; LiFePO4 - Medium; LiFePO4 High | [2] |
| Mounting orientation | vertical surface | [2] |
| Ground terminal torque | 50 in-lb | [2] |
| Battery terminal torque | 100 in-lb | [2] |
| Battery voltage range | 9-72V (charging); 10-72V (load); Power OFF < 8V | [2] |
| Operating temperature | -30°C to +60°C | [2] [1] |
Warranty
No warranty facts recorded.
Certificate records
| Standard | Record | Evidence | Sources |
|---|---|---|---|
| UL 1741 | Claimed · present at observation | [1] | |
| CSA 22.2 107-1 | Claimed · present at observation | [1] | |
| IEC 62109-1 | Claimed · present at observation | [1] | |
| EMC Directive 2014/30/EU | Claimed · present at observation | [1] | |
| ICES-003 | Claimed · present at observation | [1] | |
| FCC Class B | Claimed · present at observation | [1] | |
| CEC Australia Listing | Claimed · present at observation | [1] | |
| IEC 60950 | Claimed · present at observation | [1] |
Sources and revisions
- Morningstar's own GenStar MPPT datasheet, control #MS-003676, dated May 12, 2026, from morningstarcorp.com's own GenStar MPPT product page. https://www.morningstarcorp.com/wp-content/uploads/GenStar-MPPT-2026-May-1.pdf
- Morningstar GenStar MPPT Solar DC System Controller Installation, Operation and Maintenance Manual (MS-003633 v3.0) https://www.morningstarcorp.com/wp-content/uploads/operation-manual-genstar-mppt-en.pdf