No product photos yet.

Fox ESS EP6 Plus Battery Module

Name: Fox ESS EP6 Plus Battery Module
Brand: Fox ESS

By Fox ESSSKU not documented

DC battery module 192 V 30 Ah

Evidence scoreResearch pending

No reviews · Write the first

Write a review

No sellers found.

SaveReport an error Write a review Quick reference sheet

Basic specs5.76 kWhDischarge30 ACharge30 APeak current: 65 A $ / rated kWhUnavailable WarrantyUnknownSee terms Lifetime productionNot published Size44.99 L^*Value needs confirmation: Manual and sheet print different weight tolerancesW: 380 × H: 640 × D: 185 mm51 kg112.44 lb0.13 kWh/L*CertificatesNone on fileEvidence missing

Key specs

Units

Chemistry: Lithium Iron Phosphate
Official user manual
Sources
The battery chemistry of these products is Lithium Iron Phosphate.
LFP (LiFePO₄)
Exact datasheet MODEL only.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 5, Introduction
Documented
Nominal energy: 5.76 kWh
Official user manual
Sources
Printed Nominal energy (kWh) 5.76; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Nominal energy (kWh)
Documented
Nominal voltage: 192 V
Official user manual
Sources
Printed Nominal voltage (Vdc) 192.0; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Nominal voltage (Vdc)
Documented
Rated capacity: 30 Ah
Official user manual
Sources
The row is Rated capacity (Ah), 30. No nominal-capacity or usable-capacity calculation.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Rated capacity (Ah)
Documented
Continuous discharge current: 30 A
Official user manual
Sources
Printed 30/30 in discharge/charge order; continuous-current row, not a peak or generic maximum rating.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Max. continuous discharging/charge current (A)
Documented
Continuous charge current: 30 A
Official user manual
Sources
Printed 30/30 in discharge/charge order.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Max. continuous discharging/charge current (A)
Documented
Maximum discharge current: 30 A
Official datasheet
Sources
Footnote 1: The current is affected by temperature, cell voltage and SOC. Distinct from manual continuous-current row.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Max. Charge/Discharge Current
Documented
Charge termination current: 2 A
Official user manual
Sources
Printed Charging cut off current (constant current and constant voltage) (A) 2; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Charging cut off current (constant current and constant voltage) (A)
Documented

10 specs not documented yet: usable energy, cycle rating, conductor sizes, terminal torque, nominal capacity, warming up function, communication terminal torque, mounting hole dimensions, external fuse breaker rating, manufacturer fire instructionsHelp fill in ›

All specs79

Chemistry: Lithium Iron Phosphate
Official user manual
Sources
The battery chemistry of these products is Lithium Iron Phosphate.
LFP (LiFePO₄)
Exact datasheet MODEL only.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 5, Introduction
Documented
Nominal energy: 5.76 kWh
Official user manual
Sources
Printed Nominal energy (kWh) 5.76; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Nominal energy (kWh)
Documented
Usable energy: Not documented
Details
No usable-energy row is printed for this exact code; no nominal-energy times DoD calculation.
Not documented
Nominal voltage: 192 V
Official user manual
Sources
Printed Nominal voltage (Vdc) 192.0; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Nominal voltage (Vdc)
Documented
Rated capacity: 30 Ah
Official user manual
Sources
The row is Rated capacity (Ah), 30. No nominal-capacity or usable-capacity calculation.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Rated capacity (Ah)
Documented
Continuous discharge current: 30 A
Official user manual
Sources
Printed 30/30 in discharge/charge order; continuous-current row, not a peak or generic maximum rating.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Max. continuous discharging/charge current (A)
Documented
Continuous charge current: 30 A
Official user manual
Sources
Printed 30/30 in discharge/charge order.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Max. continuous discharging/charge current (A)
Documented
Maximum discharge current: 30 A
Official datasheet
Sources
Footnote 1: The current is affected by temperature, cell voltage and SOC. Distinct from manual continuous-current row.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Max. Charge/Discharge Current
Documented
Charge termination current: 2 A
Official user manual
Sources
Printed Charging cut off current (constant current and constant voltage) (A) 2; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Charging cut off current (constant current and constant voltage) (A)
Documented
Maximum charge current: 30 A
Official datasheet
Sources
Footnote 1: The current is affected by temperature, cell voltage and SOC. Distinct from manual continuous-current row.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Max. Charge/Discharge Current
Documented
Peak discharge current: 65 A
Official user manual
Sources
Peak discharging current is printed for 30 seconds.
65 A
Printed 65 @60s, separate duration-conditioned claim from manual 65 A/30 s; no same-condition conflict asserted.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Peak discharging current (30s) (A)
Documented
Operating voltage range: 174 to 219 V
Official user manual
Sources
Printed Battery voltage range (Vdc) 174.0~219.0; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Battery voltage range (Vdc)
Documented
Recommended charge current: 15 A
Official user manual
Sources
Printed Recommended charging current (CC-CV) (A) 15; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Recommended charging current (CC-CV) (A)
Documented
Cycle rating: Not documented
Details
No cycle-life row identified in these exact-model documents.
Not documented
Cycle rating end-of-life capacity: Not documented
Details
No end-of-life percentage or cycle condition is inferred.
Not documented

Lifetime production

Not published

Published claims and calculations are not independently tested lifetime output.

Communications: CAN
Official user manual
Sources
Printed Communication CAN; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Communication
Documented
Maximum parallel units: 4
Official datasheet
Sources
Printed Max. 4 Units in Parallel for this exact MODEL only; no transfer to the other manual codes.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Scalability
Documented
Storage temperature: 0 to 35 °C32 to 95 °F converted
Manual and sheet print different storage ranges
Primary exact-model manual table prints 0~35°C. The exact-model datasheet prints -10~40°C. Both remain cited; the manual time/RH/SOC chapter remains a separate context.
Official user manual
Sources
Exact model specification-table range. Time/RH/SOC-conditioned storage instructions on PDF page 19 remain separately recorded.
-10 to 40 °C
Datasheet prints -10 ~ 40; primary manual scalar table prints 0~35.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Storage temperature (°C)
Documented
Fire protection: Fox ESS batteries incorporate a thermal aerosol fire extinguishing device. This device deploys upon detection of thermal runaway and was capable of suppressing and restricting the spread of fire.
Official user manual
Sources
Manufacturer description of thermal aerosol device, not independently verified suppression performance.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 18, warning
Documented
Charging temperature: 0 to 55 °C32 to 131 °F converted
Official user manual
Sources
Charge range in the printed charge/discharge order. Datasheet footnote 3: Charge and discharge power reduction applies at low temperatures.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier documentOfficial datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Operating charge/discharge temperature (°C)
Documented
Discharging temperature: -10 to 55 °C14 to 131 °F converted
Official user manual
Sources
Discharge range in the printed charge/discharge order. Datasheet footnote 3: Charge and discharge power reduction applies at low temperatures.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier documentOfficial datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Operating charge/discharge temperature (°C)
Documented
Expansion requirements: PDF page 16: Please ensure the new batteries mounted on-site comply to the warranty scope or have ever been re-charged within 6 months; on top of that, please make sure the SOC of present battery system onsite is 50%±5%.; PDF page 19: For the first installation, the interval among manufacture dates of battery modules shall not exceed 3 months.; PDF page 48: If users want to increase their battery system capacity, please ensure that the manufacturer date of the new battery shall not exceed 12 months; in case of exceeding 12 months. please charge the new battery to around 50%.
Official user manual
Sources
Separate first-install, recharge and expansion contexts; no single universal age limit selected.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 16, 19 and 48
Documented
Display: LED*5
Official datasheet
Sources
Exact unsuffixed Plus MODEL column on the cited datasheet; no transfer to other Plus or (w) versions.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Display
Documented
Grounding (manual): PDF pages 12, 25, 30, 35, 40: This terminal is used to connect the battery to the earth for safety purposes.; PDF pages 12, 25, 30, 35, 40: In parallel mode, this terminal can also be used to connect to parallel battery.; PDF pages 12, 25, 30, 35, 40: Please ensure that all the batteries are grounded properly.; PDF pages 12, 25, 30, 35, 40: Use screw (G2) to connect ground cable (K2) to the ground point.; PDF pages 12, 25, 30, 35, 40: M5; PDF pages 12, 25, 30, 35, 40: 2N·m; PDF pages 28, 38: Connect the Ground Cable (K2) from the ground terminal of the Main battery (left side of the battery) to the ground terminal of the next battery (right side of the battery), and continue the same connection until the ground terminal of the last battery (left side of the battery).
Official user manual
Sources
Grounding screw torque is recorded separately; exact left/right chain wording remains as printed. No neutral-ground bond inferred.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 12, 25, 28, 30, 35, 38, 40, installation instructions
Documented
Pinout pcs: PIN 1 / PCS_Wake+ / Wakeup+; PIN 2 / PCS_Wake- / Wakeup-; PIN 3 / N/A / N/A; PIN 4 / PCS_CANL / CANL; PIN 5 / PCS_CANH / CANH; PIN 6 / PCS_CANH / CANH; PIN 7 / PCS_CANL / CANL; PIN 8 / N/A / N/A
Official user manual
Sources
PIN / Function definitions / Function declaration as printed. Repeated pins and spelling are not corrected.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 11-12, PCS pin table
Documented
Humidity: 5 to 95 %
Official datasheet
Sources
Printed 5 ~ 95 (No Condensation).
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Humidity
Documented
Installation clearances (manual): PDF pages 22, 32: Make sure to leave a space of at least 300 mm. A clearance of at least 300 mm must be left around the battery pack for proper cooling.; PDF pages 22, 32: The safety clearance for equipment installation must comply with local regulations.; PDF pages 22, 32: The battery system must be kept at least 2 meters away from heat sources.; PDF pages 22, 32: Standing Mounting:; PDF pages 22, 32: Wall Mounting:; PDF pages 22, 32: ≥300mm; PDF pages 22, 32: ≥70mm; PDF pages 22, 32: H=220mm; PDF pages 22, 32: H≥290mm
Official user manual
Sources
General at-least-300 mm around-battery cooling prose and labeled top/side/between ≥300 mm and wall-bottom ≥70 mm diagram contexts remain separate. No front/rear distance or reconciled requirement inferred.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 22, 32, installation instructions
Documented
Peak charge current: 36 A
Official user manual
Sources
Peak charging current is printed for 5 seconds.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Peak charging current (5s) (A)
Documented
Cooling: Natural Convection
Official datasheet
Sources
Exact unsuffixed Plus MODEL column on the cited datasheet; no transfer to other Plus or (w) versions.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Cooling Method
Documented
Pinout link in: PIN 1 / Main_SL / Main_SL; PIN 2 / RACK_CANL / CANL; PIN 3 / N/A / N/A; PIN 4 / N/A / N/A; PIN 5 / RACK_CANH / CANH; PIN 6 / ISO_GND / GND; PIN 7 / Sync_WKEOUT / WakeupIn; PIN 8 / Encode_IN / Encode_IN
Official user manual
Sources
PIN / Function definitions / Function declaration as printed. Repeated pins and spelling are not corrected.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 11-12, LINK IN pin table
Documented
Address / DIP setting (manual): Insert the Parallel Plug (I2) into the LINK IN port, this battery is defined as the Main battery (whichever battery can be set as the Main).
Official user manual
Sources
No DIP positions or numeric address values printed; the parallel plug determines the designated Main battery in this passage.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 27 and 37, Main battery assignment
Documented
Conductor sizes: Not documented
Details
No AWG or mm² conductor cross-section is printed. CAT.5E and 3 m cable lengths are not wire gauges.
Not documented
Low SOC storage: PDF page 48: After the product is powered off, static power consumption and self-discharge loss may occur in internal modules. Therefore, charge batteries in a timely manner and do not store the product in low SOC. Otherwise, the product may be damaged due to overdischarge, and battery modules need to be replaced.; PDF page 48: The DC SWITCH on the power control module is OFF.; PDF page 48: The power cables or signal cables are not connected.; PDF page 48: The batteries cannot be charged due to a system fault after discharge.; PDF page 48: The batteries cannot be charged due to incorrect configurations in the system.; PDF page 48: The batteries cannot be charged due to no PV input and long-term mains failure.; PDF page 48: The Link In and Link Out interface cables are not securely connected. Ensure proper attachment of both connectors during parallel operation.; PDF page 48: Regardless of scenarios, the batteries must be charged within the longest interval corresponding to the SOC when the batteries are powered off. If the batteries are not charged within the specified interval, they may be damaged due to overdischarge.; PDF page 48: 0~35℃; PDF page 48: 0% ≤ SOC < 5%; PDF page 48: 7 days; PDF page 48: When the battery SOC decreases to 0%, charge the batteries within 7 days. Permanent battery faults caused by delayed charge due to customer reasons are beyond the warranty scope.
Official user manual
Sources
Printed table applies 0~35°C and 0%≤SOC<5%, maximum 7 days. Preserve the full passage and customer-delay exclusion; no extrapolation to other bands.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 48, installation instructions
Documented
Parallel wiring: PDF pages 27, 28, 37, 38: Do not connect different battery types together.; PDF pages 27, 28, 37, 38: Insert the Parallel Plug (I2) into the LINK IN port, this battery is defined as the Main battery (whichever battery can be set as the Main).; PDF pages 27, 28, 37, 38: Use the PCS Communication Cable(J2) to cross-connect the LINK OUT of the previous battery with the LINK IN of the next battery. Start from the LINK OUT of the Main and continue until reaching the LINK IN port of the last battery.; PDF pages 27, 28, 37, 38: Insert the Parallel Plug (I2) into the LINK OUT port of the last connected battery.; PDF pages 27, 28, 37, 38: Ensure that there is no short circuit of the terminals or with any external device.; PDF pages 8, 27, 29, 37, 39: 1st(Main); PDF pages 8, 27, 29, 37, 39: 2nd; PDF pages 8, 27, 29, 37, 39: 3rd; PDF pages 8, 27, 29, 37, 39: 4th(last); PDF pages 8, 27, 29, 37, 39: The system diagram herein is for reference only. The demonstrated battery model is EP12 Plus / EP12 Plus (w).; PDF pages 8, 27, 29, 37, 39: The connections shown in the figures are for reference only, the actual configuration will depend on the specific project.
Official user manual
Sources
Main and final terminations are printed; four drawn batteries are examples, not a numerical maximum. Junction box is separately purchased.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 8, 27, 28, 29, 37, 38, 39, installation instructions
Documented
Pinout link out: PIN 1 / Last_SL / Last_SL; PIN 2 / RACK_CANL / CANL; PIN 3 / N/A / N/A; PIN 4 / N/A / N/A; PIN 5 / RACK_CANH / CANH; PIN 6 / ISO_GND / GND; PIN 7 / Sync_WKEOUT / WakeupOut; PIN 8 / Encode_OUT / Encode_OUT
Official user manual
Sources
PIN / Function definitions / Function declaration as printed. Repeated pins and spelling are not corrected.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 11-12, LINK OUT pin table
Documented
Protective class: Class Ⅰ
Official user manual
Sources
Printed Protective class Class Ⅰ; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Protective class
Documented
Storage schedule: Below -20℃ / Not allowed /; -20~0℃ 10%~90% ≤ 1 months 20%≤SOC≤50%; 0~35℃ 10%~90% ≤ 6 months 20%≤SOC≤50%; 35~55℃ 10%~90% ≤ 1 months 20%≤SOC≤50%; Above 55℃ / Not allowed /
Official user manual
Sources
Column order temperature, relative humidity, storage time, SOC. Shared endpoints and printed bounds retained without reconciliation.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 19, Storage table
Documented
Remote monitoring: PDF pages 42, 43: Once the system has been successfully installed and commissioned, communication between the battery and the inverter is functioning correctly, and the battery can be monitored and controlled by the inverter. End users can view the monitoring page via the FoxCloud APP or the FoxCloud Web platform.; PDF pages 42, 43: The system diagram herein is for reference only. The demonstrated battery model is EP12 Plus / EP12 Plus (w).; PDF pages 42, 43: Terminal layout may vary between different inverters; the diagram above is for reference only. The actual wiring should be carried out in accordance with the manual for the specific inverter being used.; PDF pages 42, 43: The equipment details shown in the above images above are for reference only.
Official user manual
Sources
Communication/commissioning prerequisites remain; app example device/account data are not product facts. No universal inverter compatibility inferred.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 42, 43, installation instructions
Documented
Site requirements: PDF pages 5, 15, 23, 33, 41: This manual is designed for qualified personnel only. The tasks described in this document should be performed by authorized and qualified technicians only.; PDF pages 5, 15, 23, 33, 41: After Installation the Installer must explain the user manual to the end user.; PDF pages 5, 15, 23, 33, 41: All operations, including transportation, installation, start-up and maintenance, must be performed by qualified and trained personnel.; PDF pages 5, 15, 23, 33, 41: Do not energize the equipment without completing the installation or without professional confirmation, and strictly prohibit operation with electricity.; PDF pages 5, 15, 23, 33, 41: Make sure that the inverter and battery is completely turned off before commencing installation.; PDF pages 5, 15, 23, 33, 41: All installation and operation must comply with local electrical standards.; PDF pages 5, 15, 23, 33, 41: Check all power cables and communication cables carefully.; PDF pages 15, 16, 17: Do not place the product under direct sunlight.; PDF pages 15, 16, 17: Do not use battery in high static environment where the protection device might be damaged.; PDF pages 15, 16, 17: Keep the installation area away from high-temperature sources, flammable or explosive materials, and other potential explosion hazards such as gas valves, LPG cylinders, heat pumps, firewood stacks, etc.; PDF pages 15, 16, 17: The installation area must be completely waterproof, with a hard, level floor, and the wall should not have noticeable inclined angle.; PDF pages 15, 16, 17: Maintain low and stable humidity with good ventilation; dust and dirt within the installation area must be minimized.; PDF pages 15, 16, 17: Position the installation area away from television antennas or antenna cables to avoid lightning strikes and electromagnetic interference.; PDF pages 15, 16, 17: Avoid the presence of flammable debris around the battery, such as cotton, fabric, haystacks, etc., which may be ignited by sparks and then lead the fire source to the battery, thus causing the battery to burn.; PDF pages 15, 16, 17: Avoid the presence of hot or flammable objects around the battery, such as hydraulic bottles (natural gas, oxygen, etc.), heat pumps and so on.; PDF page 16: Do not install the equipment outdoors in salt-affected areas because it may be corroded. A salt-affected area refers to the region within 1000 m of the coast or prone to sea breeze. Regions prone to sea breeze vary with weather conditions (such as typhoons and monsoons) or terrains (such as dams and hills).; PDF pages 17, 18, 22, 32: The battery system can be installed indoors or outdoors.; PDF pages 17, 18, 22, 32: The ingress protection rating for this product is IP65 and it is therefore suitable for outdoor use. Locations fully exposed to precipitation and/or extended periods of exposure to direct sunlight should, where possible, be avoided. A location where there is some direct exposure to the elements, or where complete protection cannot be achieved, are permissible and will not impact upon warranty claims providing reasonable measures have been taken. For more clarification, please contact your local Fox ESS service team.; PDF pages 17, 18, 22, 32: This product features dust protection and is resistant to powerful water jets, but it is not designed to be submerged. Hence care should be taken not to get it wet. If you find the battery completely or partially submerged in water do not try to open. Contact an authorized personnel or Fox ESS for further instructions.; PDF pages 22, 32: For indoor installation scenarios, the installation area must be no less than 17 m².; PDF pages 22, 32: For indoor installation, please refer to local installation regulations or fire safety regulations for specific provisions. The following methods are for reference only:; PDF pages 22, 32: Install smoke alarm devices;; PDF pages 22, 32: Install forced-start emergency ventilation devices, simultaneously shutting down the air conditioning/fresh air system (to prevent gas diffusion);; PDF pages 22, 32: Install audible and visual alarms.; PDF pages 23, 33: There should be minimal dust and dirt at the location. The building should be of solid brick and concrete structure for installation on walls or floors. If other types of walls and floors are used, they must be made of flame-retardant materials and meet the load requirements of battery.; PDF pages 15, 16: Do not expose battery to open flame.; PDF pages 15, 16: Do not place the product near flammable materials. It may lead to fire or explosion in case of accident.; PDF pages 15, 16: Store in a cool and dry place with ample ventilation.; PDF pages 15, 16: Store the product on a flat surface.; PDF pages 15, 16: Store the product out of reach of children and animals.; PDF pages 15, 16: Do not damage the unit by dropping, deforming, impacting, cutting or penetrating with a sharp object. It may cause leakage of electrolyte or fire.; PDF pages 15, 16: Do not touch any liquid spilled from the product. There is a risk of electric shock or damage to skin.; PDF pages 15, 16: Always handle the battery wearing the insulated gloves.; PDF pages 15, 16: Do not step on the product or place any foreign objects on it. This can result in damage.; PDF pages 15, 16: Do not charge or discharge damaged battery.; PDF pages 15, 16: Do not store the battery near water sources.; PDF pages 15, 16: Warning: Do not use the battery if it has been dropped or appears compromised.; PDF page 20, Required tools: 6mm Magnetic Phillips Screwdriver(A1); Crimpers(B1); Safety Shoes(C1); Safety Gloves(D1); Safety Glasses(E1); Rubber Mallet(F1); Marker(G1); 8mm External Hexagonal Socket(H1); Cable Ties(I1); Hammer Drill @φ8mm(J1); Spirit Level(K1); Multimeter(Vdc>500)(L1)
Official user manual
Sources
Manufacturer installation and handling passages retain their stated contexts. The indoor area literally says no less than 17 m². Exposure passages are retained separately, without selecting a reconciled requirement.
Do not place the product under direct sunlight.
Separate complete manufacturer passage as printed.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
The installation area must be completely waterproof, with a hard, level floor, and the wall should not have noticeable inclined angle.
Separate complete manufacturer passage as printed.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
The ingress protection rating for this product is IP65 and it is therefore suitable for outdoor use. Locations fully exposed to precipitation and/or extended periods of exposure to direct sunlight should, where possible, be avoided. A location where there is some direct exposure to the elements, or where complete protection cannot be achieved, are permissible and will not impact upon warranty claims providing reasonable measures have been taken. For more clarification, please contact your local Fox ESS service team.
Separate complete manufacturer passage as printed.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 5, 15, 16, 17, 18, 22, 23, 32, 33, 41, installation instructions
Documented
Battery fuse or breaker (manual): PDF page 12: Power switch, battery charge and discharge circuit switch.; PDF page 48: The battery system includes an automatic low-temperature protection feature. It proactively manages the battery to maintain adequate charge, extending standby time when temperatures drop.; PDF page 7: Caution, risk of electric shock, energy storage timed discharge(＜1minute).; PDF page 13: Battery protection: Internal Short Circuit, Over Voltage, Over Current, Over Temp, Under Voltage.
Official user manual
Sources
DC switch and low-temperature protection are maker descriptions without inferred interrupt rating, reserve threshold or safe-touch procedure.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 7, 12, 48, installation instructions
Documented
Cell net weight: 35 kg77 lb converted
35 kg (±5%), as printed.Official datasheet
Sources
Cell net weight, not battery total weight; no sum or subtraction.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Cell Net Weight [kg] (±5%)
Documented
Maximum altitude m: 3,000 m9,843 ft converted
≤3000 m, as printed.Official user manual
Sources
Printed Altitude (m) ≤3000; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Altitude (m)
Documented
Operating sequence: PDF page 41: When the grid connected system is started, the inverter should be turned on first to avoid the current pulse of the inverter increasing to the battery pack.; PDF page 41: When the inverter is connected to the PV and the grid and both are operating normally, turn on the battery DC Switch.; PDF page 41: Press the POWER Switch and hold it for 3 seconds, then release. The Status LED of each battery is blinking green and indicates that the system is working normally.; PDF page 41: Press and hold the POWER Switch for at least 5 seconds until all of the battery LEDs (BMS Status LED and SOC LED) begin blinking. Once they start blinking, release the switch. The lights will automatically turn off after 5 seconds. Then, turn off the DC Switch.; PDF page 41: Under special circumstances when both PV and Grid power are out of order, the battery can be activated through the "Black Start" function. This means that our energy storage inverter and battery can continue to operate. The startup steps for black start are as follows:; PDF page 41: Turn on the DC Switch, press and hold the power button for 3 seconds, then release.; PDF page 41: Press the “Power Switch” button three times in succession within 4 seconds (Complete within 30 seconds after the battery system starts up).; PDF page 41: At least one battery's Status LED remains solid green, indicating successful activation of Black Start mode.; PDF page 41: Ensure correct battery-inverter connection prior to black start. No wiring modifications during black start.; PDF page 12: System power on switch, press and hold switch for 3 seconds, and then release the switch, the system starts to work. It also has a Black Start function, when the system works repeat the previous step: press the “Power Switch”button three times in succession within 4 seconds to enter the Black Start mode. Please complete it within 30 seconds.
Official user manual
Sources
Separate complete start-up, shutdown, detailed black-start and earlier switch passages. No selected or independently validated operating procedure, hardware compatibility or modified timing.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 12, 41, installation instructions
Documented
Terminal torque: Not documented
Details
No DC power-connector torque is printed; bracket and ground torques are not transferred.
Not documented
Communication ports (manual): PDF pages 24, 34: Insert the 2 Parallel Plugs (I2) into the LINK IN and LINK OUT ports respectively.; PDF pages 11, 12: Communication parallel interface (LINK IN, LINK OUT) and communication interface to inverter (CAN); PDF pages 11, 12: Network interface description: LINK IN is connected to the upper battery module, LINK OUT is connected to the lower battery module. PCS is the communication interface to the inverter.; PDF pages 11, 12: CAT.5E
Official user manual
Sources
Stand-alone uses two parallel plugs. LINK IN/OUT and PCS meanings are literal; CAT.5E is not wire gauge. Complete pin tables are recorded separately.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 11, 12, 24, 34, installation instructions
Documented
Included components: A2: Battery ×1; B2: Bracket(wall) ×1; C2: Bracket(battery) ×2; F2: M5×30 Screws ×2; G2: M5×10 Screws ×1; H2: OT Terminal ×2; I2: Parallel Plug ×2; J2: PCS Communication Cable (3m) ×1; K2: Ground Cable (3m) ×1; L2: Power Cable (3m) ×1; M2: Power Connector Puller ×1; N2: Quick Installation Guide ×1; D2: M6×12 Screw ×4; E2: D8 Expansion Tube ×4
Package and mounting labels differ
The inventory names E2 D8 Expansion Tube; the mounting prose calls E2 ST6×40 screws. Large-battery inventory has eight expansion tubes while its prose says four holes. Both contexts remain as printed.
Official user manual
Sources
Exact single-battery packing labels and quantities, not a system/stack total. E2 is D8 Expansion Tube in inventory but ST6×40 screws in mounting prose; no correction or substituted quantity.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 21, Items in the package
Documented
Mounting hole count: 4 holes
Official user manual
Sources
Both procedures say 4 holes. The large-battery package table separately lists 8 D8 Expansion Tubes; no inferred hole count or package correction.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 23 and 33, mounting prose
Documented
Nominal capacity: Not documented
Details
No distinct nominal-capacity row is printed; rated capacity is recorded separately.
Not documented
Warming up function: Not documented
Details
No installed warm-up hardware or heated-code equivalence is inferred for this unsuffixed code; optional exact-model sheet conditions, when present, remain conditional.
Not documented
Communication terminal torque: Not documented
Details
No communication-connector torque identified.
Not documented
Maintenance schedule: PDF pages 19, 44: Every year after installation. The connection of power connector, grounding point, power cable and screw are suggested to be checked. Make sure there is no loose, no broken, no corrosion at connection point. Check the installation environment such as dust, water, insect etc.; PDF pages 19, 44: To ensure long-term accuracy of the State of Charge (SOC), it is recommended to perform a full SOC calibration at regular intervals (for example, every two weeks).; PDF pages 19, 44: This calibration is completed by charging the battery until the charging power reaches zero, allowing the system to correctly re-align the SOC reference.; PDF pages 19, 44: Before performing any cleaning work, disconnect the system from all power sources.; PDF pages 19, 44: Clean the housing, cover, and display using a soft, dry cloth only.; PDF page 44, Battery cleanliness / The battery is free of dust and obstructions, ensuring proper heat dissipation. / Every 6~12 months; PDF page 44, Battery visible damage / The product shows no signs of damage or deformation. / Every 6 months; PDF page 44, Battery operating status / 1. The product operates without abnormal noise. 2. All system parameters are correctly configured. This maintenance should be performed while the product is running. / Every 6 months; PDF page 44, Electrical connections / 1. All cables are securely connected. 2. Cables are intact; in particular, cable jackets in contact with metallic surfaces show no scratches or damage. 3. Unused cable glands are sealed with rubber plugs and properly secured with pressure caps. / Perform the first inspection 6 months after initial commissioning. Thereafter, every 6~12 months.
Official user manual
Sources
Annual inspection passage and detailed maintenance intervals retain separate contexts; calibration is a recommendation, not a cycle-life rating.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 19, 44, installation instructions
Documented
Mounting orientation (manual): PDF pages 22, 24, 32, 34: Standing Mounting:; PDF pages 22, 24, 32, 34: Wall Mounting:; PDF pages 22, 24, 32, 34: Do not install the battery in a forward tilt, backward tilt, lateral tilt, horizontal position, or upside-down position.
Official user manual
Sources
Manufacturer passages retain their printed scope and conditions; no independent testing or compatibility inference.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 22, 24, 32, 34, installation instructions
Documented
Installation location: Outdoor/ Indoor
Official datasheet
Sources
Manual site restrictions, sunlight/exposure and coastal limits remain separately recorded.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Installation Location
Documented
Depth of discharge: 90 %
Official datasheet
Sources
Exact unsuffixed Plus model only; no derived usable energy or transfer to (w) codes.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Depth of Discharge
Documented
Ground terminal torque (manual): 2 N·m
Official user manual
Sources
M5×10 G2 grounding screw only; not battery power-terminal torque.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 25 and 35, G2 grounding pictogram
Documented
Fire protection function: YES
Official datasheet
Sources
Maker feature claim; manual separately names the thermal aerosol device.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Fire Protection Function
Documented
Junction box distance: 300 to 600 mm11.8 to 23.6 in converted
Official user manual
Sources
Keep a distance of 300-600mm from the battery to the junction box.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 30 and 40, parallel connection
Documented
Mounting fastener torque: M5, 2N·m
Official user manual
Sources
Only the two M5×30 F2 bracket locking screws. No torque assigned to D2 M6×12 screws, DC or communication terminals.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 24 and 34, F2 torque pictogram
Documented
Mounting hole dimensions: Sources disagree
Manual prints different drill depths
Prose gives 45-50 mm and the adjacent diagram gives 80-85 mm. Both complete passages remain cited; no drilling depth is selected.
UnresolvedOfficial user manual
Why values differ
The same page prints different drilling depths; no depth selected.
Remove the bracket, drill the holes with a hammer drill (φ8mm, depth range 45-50mm), and tighten the expansion bolts to ensure that the bracket is securely installed.
Separate complete manufacturer passage as printed.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Ø8mm / 80-85mm / 90°
native drill diagram labels
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 23 and 33, bracket drilling prose and diagram
Sources disagree
Power cable installation: PDF pages 12, 26, 30, 36, 40: DC+; PDF pages 12, 26, 30, 36, 40: Connect bat + of inverter.; PDF pages 12, 26, 30, 36, 40: DC -; PDF pages 12, 26, 30, 36, 40: Connect bat - of inverter.; PDF pages 12, 26, 30, 36, 40: Connect the PCS Communication Cable (J2) to the BMS port on the inverter.; PDF pages 12, 26, 30, 36, 40: Use power cable(L2) to connect the battery's DC+ and DC- terminals to the inverter's BAT+ and BAT- terminals.; PDF pages 12, 26, 30, 36, 40: Connect the PCS Communication Cable (J2) of the Main battery to the BMS communication port of the inverter.; PDF pages 12, 26, 30, 36, 40: Connect the Power Cable (L2) of each battery to the junction box (need to purchase separately). Connect the output power cable of the junction box to the battery port of the inverter.
Adjacent connection wording needs clarification
PDF pages 26 and 36 name inverter BAT+ and BAT- connections and also say not to connect to inverter conductors. Both passages remain as printed; no wording is repaired or procedure selected.
Official user manual
Sources
The adjacent inverter-conductor warning is retained in full as an alternative; no silently corrected connection procedure.
Use power cable(L2) to connect the battery's DC+ and DC- terminals to the inverter's BAT+ and BAT- terminals.
Separate complete manufacturer passage as printed.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Do not connect the pack to inverter conductors or Photo-Voltaic conductors. This will damage the battery and may result in explosion. Do not interchange the positive and negative terminals of the battery.
Separate complete manufacturer passage as printed.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 12, 26, 30, 36, 40, installation instructions
Documented
Short circuit current ka: 2.3 kA
Official user manual
Sources
Printed Short circuit current (kA) 2.3; manufacturer claim, not an independent test.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Short circuit current (kA)
Documented
Compatibility requirements: PDF pages 16, 27, 37, 48: Do not exceed the battery voltage rating of the inverter.; PDF pages 16, 27, 37, 48: Do not connect the battery to any incompatible inverter.; PDF pages 16, 27, 37, 48: Do not install with other batteries or cells.; PDF pages 16, 27, 37, 48: Do not connect different battery types together.; PDF pages 16, 27, 37, 48: Please ensure the new batteries mounted on-site comply to the warranty scope or have ever been re-charged within 6 months; on top of that, please make sure the SOC of present battery system onsite is 50%±5%.; PDF pages 16, 27, 37, 48: If users want to increase their battery system capacity, please ensure that the manufacturer date of the new battery shall not exceed 12 months; in case of exceeding 12 months. please charge the new battery to around 50%.
Official user manual
Sources
No named compatible inverter model or cross-model mixing permission is printed. The inverter voltage rating and own installation manual remain necessary; no electrical fit calculated.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 16, 27, 37, 48, installation instructions
Documented
Mounting bracket height: Standing Mounting: H=220mm; Wall Mounting: H≥290mm
Official user manual
Sources
Bracket location height as drawn, not product dimensions or a universal ground clearance.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 22 and 32, bracket B2 diagrams
Documented
Heated charge temperature: -25 to 55 °C-13 to 131 °F converted
Official datasheet
Sources
Optional warm-up-on condition printed on this exact unsuffixed model sheet; no installed heater, (w) identity or equivalence inferred.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Operating Temperature (warm up function on, optional)
Documented
Maximum scalable energy: 23.04 kWh
Official datasheet
Sources
Directly printed scalability claim; not a multiplication performed by Charged Reviews.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 1, Scalable to
Documented
Storage capacity loss claim: If the battery is stored over one year,5%-8% of the capacity may lose irreversibly.
Official user manual
Sources
Conditional maker claim for storage over one year, not a lifetime warranty or cycle-life specification.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 19, Storage
Documented
External fuse breaker rating: Not documented
Details
No external fuse/breaker current or voltage rating is printed for this exact battery installation; a fault name is not a fuse specification.
Not documented
Installation SOC requirement: Please ensure the new batteries mounted on-site comply to the warranty scope or have ever been re-charged within 6 months; on top of that, please make sure the SOC of present battery system onsite is 50%±5%.
Official user manual
Sources
Recharge-within-six-months/site SOC50%±5% passage is not a universal module-age limit; first-install and expansion contexts retained separately.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 16, new batteries mounted on-site
Documented
Storage recharge instruction: PDF page 19: It is recommended that the battery storage time is not more than 6 months.; PDF page 19: For the first installation, the interval among manufacture dates of battery modules shall not exceed 3 months.; PDF page 19: Regularly check whether the service environment of the battery meets the requirements, and the installation position should be far away from the heat source.; PDF page 19: The battery module should be stored in an environment with a temperature range between -20°C~55°C, and charged regularly according to the table below with no more than 0.5 C (A C-rate is a measure of the rate at which a battery is discharged relative to its maximum capacity) to the SOC of 50% after a long time of storage.; PDF page 19: If the battery is stored over one year,5%-8% of the capacity may lose irreversibly.
Official user manual
Sources
Storage instructions are separate from exact-model scalar table 0~35°C. The paragraph describes -20°C~55°C with duration/RH/SOC table conditions; no universal range or schedule inferred.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 19, installation instructions
Documented
Inverter interface protection: Inverter interface protection: Over Voltage, Over Current, External Short Circuit, Reverse Polarity, Ground Fault, Over Temp, In Rush Current.
Official user manual
Sources
Manufacturer-printed inverter-interface protection claim in the manual explicit twelve-model scope; no independently verified protection performance or external protective-device rating inferred.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 13, Inverter interface protection
Documented
Manufacturer stated standards: IEC 62477-1;IEC 62619
Official user manual
Sources
Printed manufacturer standard claims, not independent issuer verification. Symbols on PDF page 6 separately name CE, RCM and UKCA; symbols do not establish a regional sale.
Safety: IEC62619; EMC: EN IEC 61000-6-1/2/3/4; Transportation: UN38.3
Manufacturer statements only, no certificate entity, listing number or independent verification inferred.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 54; printed page 50; 8.5 EP6 Plus Specifications; Specifications for Battery; row Standard
Documented
Heated discharge temperature: -25 to 55 °C-13 to 131 °F converted
Official datasheet
Sources
Optional warm-up-on condition only; no installed heater or (w) equivalence inferred.
Official datasheet: Fox ESS EP6 datasheet V1.3 Rev V1.3 · July 10, 2026 · Checked Nov 4, 2026 · Earlier document
Location: PDF page 2, Operating Temperature (warm up function on, optional)
Documented
Manufacturer fire instructions: Sources disagree
Manual gives differing fire instructions
PDF page 6 prohibits water; page 16 says dry powder only and no liquid extinguisher; page 17 names FM-200 or CO2 for the battery and ABC for other parts, with disconnection-if-safe and immediate evacuation wording. Full passages remain separately cited; no method is selected.
UnresolvedOfficial user manual
Why values differ
Different fire instructions are printed in the same manual. No extinguisher or procedure is selected.
Prohibit the use of water to extinguish fires.
Separate complete manufacturer passage as printed.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
In case of fire, use only dry powder fire extinguisher. Liquid extinguishers should not be used.
Separate complete manufacturer passage as printed.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
In situations where the battery is on fire, if it is safe to do so, disconnect the battery pack by turn off the circuit breaker to shut off the power to the system. Use FM-200 or CO2 fire extinguisher for the battery and an ABC fire extinguisher for the other parts of the system. Under any fire situation, please evacuate the people from the building immediately before trying to extinguish it.
Separate complete manufacturer passage as printed.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 6, 16 and 17, separate fire passages
Sources disagree
Power cable straight length: 80 mm3.1 in converted
>80 mm straight from battery DC+/− before bending, as printed.Official user manual
Sources
Power Cable (L2) must be pulled straight from the battery DC+/- for more than 80mm before bending.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 25, 30, 35 and 40, battery DC cable note
Documented
Inverter cable vertical length cm: 30 cm
>30 cm vertical length, as printed.Official user manual
Sources
Make sure that the power cable connected to the inverter is connected vertically and that the vertical length is greater than 30 cm. If the cable is bent close to the terminals, it may cause poor line contact and result in burnt terminals.
Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document
Location: PDF pages 25, 30, 35 and 40, inverter cable warning
Documented

Published claims and calculations, not independent test results.

Documents

2 on file

PDF
Fox ESS EP6 datasheet V1.3OfficialFox ESSOfficial datasheetJuly 10, 2026
Our copy is kept as private evidence and is not available to download. SHA-256: 9e89b14715d9a94c366fad404b8e935409c1c66d67054cc406a6e47e704dcc2a, captured Nov 4, 2026.
Source details
Revision
V1.3
Revision date
July 10, 2026
Official original obtained through the maker native public download filter. Request start 2026-11-04T13:09:04.087Z; response acquisition completed 2026-11-04T13:09:15.127Z. Printed date 2026/07/10.
Location: PDF page 2, MODEL row and specifications; PDF page 1, scalable energy
Retrieved Nov 4, 2026
Manufacturer claims only. Global is a download label, not country applicability. Private evidence only; no public document crop, independent certification or numeric warranty inference. MODEL prints EP6 Plus; cover family name does not create an unsuffixed or heated-code equivalence.
Open
PDF
Fox ESS EP Battery User Manual V1.0.1OfficialFox ESSOfficial user manual
Our copy is kept as private evidence and is not available to download. SHA-256: abf672f83f67f6da8678ea44c83ab85ca88cc0de615b4d10f3d4c925bb135431, captured Nov 4, 2026.
Source details
Revision
V1.0.1
Revision date
Not stated
Official original obtained through the maker native public download filter. Request start 2026-11-04T13:08:37.705Z; response acquisition completed 2026-11-04T13:08:53.077Z. Printed date 2026-08.
Location: PDF pages 50-61, exact model tables; PDF pages 5-49, installation and operation
Retrieved Nov 4, 2026
Manufacturer claims only. Global is a download label, not country applicability. Private evidence only; no public document crop, independent certification or numeric warranty inference. The manual explicitly names twelve Plus models; existing AU EP12 Plus (w) is not created again.
Open

Submit a document

Warranty

No warranty terms on file.

Sellers

No sellers found.

Report a missing or wrong seller

Price history

No seller price history.

Owner reviews

No reviews yet

Own one? A verified review needs a receipt and a serial number photo, and counts 19× in the owner rating.

Write a review

Your reviews · Review policy

Evidence score

Research pending0% documented

The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.

Missing for this product: Certificates evidence needed; Warranty term needed; Warranty energy disclosure evidence needed; Lifetime / capacity evidence needed; Cell model disclosure evidence needed.

High voltage · Format not recorded · Rated capacity

The warranty term and the lifetime energy are each scored against the best documented value for a home storage battery: a value earns its share of that best, times the weight. A documented value always earns points; an undisclosed one earns 0.

Lifetime / capacityResearch pending0 / 20

No qualifying figure · 20% weight

Not published. No lifetime-production bonus.

Not documented. Undisclosed data scores 0.

Official user manual: Fox ESS EP Battery User Manual V1.0.1 Rev V1.0.1 · Checked Nov 4, 2026 · Earlier document

Research pending, 0 points: Certificates, Warranty term, Warranty energy disclosure, Cell model disclosure.

Computed from public specifications and evidence records. Warranty duration is not service quality; certificate evidence points are not a safety rating. Compatibility and installation limits still apply.

How it works Manufacturer? Submit documentation

Certificates

No certificates on file. Certificate guide

Parts and accessories

No sourced accessories or replacement parts listed yet.

Model history

Model identity

Model: EP6 Plus

Manufacturer SKU unknown

No historical observations recorded yet.

Community discussions

No discussions linked yet. Search DIY Solar Forum

Recalls / legal notices

No recalls or legal notices on file; this is not a complete recall or court search. All notices · Report a notice

Fox ESSProducts, reviews and history

4.0 (1)

Something wrong that is not one of the values above?

Prices · price basis. * Calculated; estimates labeled. Value needs confirmation; select it for the reason.