locator: PECRON product data (products.json, page 1), listing "PECRON E1000LFP Portable Power Station 1800W 1024Wh" (handle pecron-e1000lfp-portable-power-station-2000w-1024wh), option "E1000LFP", "sku":"E1000LFP"
conditions: PECRON's own product data, captured 2026-10-27, prints SKU "E1000LFP" for option "E1000LFP" (variant 44274637734076) of listing "PECRON E1000LFP Portable Power Station 1800W 1024Wh".
Printed as "LiFePO4 (3500+Cycles to 80%)" in PECRON manual PECRON_E1000LFP_user_manual_100V_120V_ 20240627_78dd98dc d262 4c68 8274 205c0e44987d, PDF page 3, specification table, Battery Type. Revised on 1 October 2026: The manual prints "3500+Cycles to 80%", a lower bound the stored number does not show.
Where: PDF page 3, specification table, Battery Type
Printed as "XT60 Charging Port: PV(operating voltage) range 11V~60V, 600W maximum". The FAQ says there is one built-in MPPT controller and the "XT60" port supports 11~60V (Max 600W) PV input. Manufacturer claim, not an independent test.
Where: User manual p. 9, Using solar panels to charge the E1000 LFP, XT60 charging port
Printed as "VOC(open circuit voltage) of solar panel/array must be less than 60V, otherwise, it will damage the unit!"; stated as a "less than" limit for the XT60 port.
Where: User manual p. 9, Using solar panels to charge the E1000 LFP
Printed as "near-instantaneous(within 8~20ms)" for the E1000 LFP; an upper bound of a printed 8 to 20 ms range, not a measured value. The manual adds that it is not applicable to loads that need a transfer time under 8 ms. Manufacturer claim, not an independent test.
Printed as "0℃~45℃/32°F~113°F (Charging)" (Temperature); ambient range in which the manual says the unit charges. Manufacturer claim, not an independent test.
Where: PDF page 3, SPECIFICATIONS, GENERAL INFO, Temperature
Printed as "-20℃~45℃/-4°F~113°F (Discharging)"; ambient range in which the manual says the unit discharges. Manufacturer claim, not an independent test.
Where: PDF page 3, SPECIFICATIONS, GENERAL INFO, Temperature
Not printed for this model in the documents on file. Revised on 1 October 2026: PECRON prints no lifetime energy figure; the stored value was computed from capacity and cycle life.
1,024 WhChemistry LiFePO4 · Cycle life 3,500 cycles
Rated AC output
1,800 W
Solar input limit
600 W
MPPT voltage
11-60 V
Weight
13.5 kg / 29.8 lbDimensions 239 W × 255 H × 378 L mm / 9.41 W × 10 H × 14.9 L in
Evidence score
8/10040% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing for this product: Certificates evidence needed; Warranty energy disclosure evidence needed; Cell model disclosure evidence needed.
Power stations · 120 V AC · Rated capacity
The warranty term and the lifetime energy are each scored against the best documented value for a power station: a value earns its share of that best, times the weight. A documented value always earns points; an undisclosed one earns 0.
Printed as "2+1 Years Warranty" on the E1000LFP product page, captured on September 25, 2026. PECRON's warranty registration page states that the additional term is activated by registering within 30 days of purchase ("Please register your Pecron within 30 days of purchase to activate your extra 12-month warranty"), so the first figure is recorded as the term without registration.
Not documented, 0 points: Certificates, Warranty energy disclosure, Cell model disclosure.
Computed from public specifications and evidence records. Warranty duration is not service quality; certificate evidence points are not a safety rating. Compatibility and installation limits still apply.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
Unknown: no certification evidence recorded in this data.
Warranty
Field
Value
Conditions
Source
Warranty term
2 years
Plus 1 year after registration
Printed as "2+1 Years Warranty" on the E1000LFP product page, captured on September 25, 2026. PECRON's warranty registration page states that the additional term is activated by registering within 30 days of purchase ("Please register your Pecron within 30 days of purchase to activate your extra 12-month warranty"), so the first figure is recorded as the term without registration.
Where: Product page, headline feature list and Specs table
1 year further, only if the product is registered with PECRON within 30 days of purchase
The product page prints "2+1 Years Warranty"; the registration page prints "Please register your Pecron within 30 days of purchase to activate your extra 12-month warranty" and limits the extension to brand new portable power stations bought from PECRON's own channel.
Archived copy of a document published by PECRON. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-25.
Location: WARRANTY REGISTRATION introduction
Retrieved Sep 24, 2026
PECRON's own warranty registration page, captured on September 25, 2026. It states which products receive an extra warranty term after registration within 30 days of purchase. It does not print the standard warranty term of any product and is not the warranty policy itself.
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-25.
Location: Headline feature list; Specs table
Retrieved Sep 24, 2026
PECRON's own US store page for the E1000LFP, captured on September 25, 2026. Cited only for the rows quoted from its headline feature list and specification table; store-wide template text on the page (for example a generic warranty line in the "Why Choose Us" block) is not read as a product specification.
Manufacturer marketing and specification page for the PECRON E1000LFP. It establishes the model designation and the figures printed in its specification table on the date read; it does not establish certification, third-party test results, price or availability.
Archived copy of a document published by PECRON. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
E1000LFP
Manufacturer SKU E1000LFP · US market · Earlier class: Solar generator
No historical observations recorded yet.
Other recorded fields
Field
Value
Conditions
Source
Evidence breakdown
method version: 0.21-personal
documented pct: 40
basis: nominal
missing:
Certificates evidence needed
Warranty energy disclosure evidence needed
Cell model disclosure evidence needed
criteria:
key: certificateEvidence
label: Certificates
value: 0
unit: evidence points
shown: Not documented
shown detail: Unknown
state: missing
points: 0
ceiling: 45
weight: 45
share: 0
covered: no
missing: yes
folded: yes
reason: Unknown
reason text: Unknown
note: No qualifying applicable evidence recorded. This is not proof that certification is absent. Applies: UL 2743; UL 1973; CEC not applicable to portable power stations; UL 9540 not applicable to portable power stations.