Printed as "Lifecycles 500 Cycles to 80% capacity (Discharge rate: 1C, Full charge/discharge, Temp: 25C)"; manufacturer claim, not an independent test.
Where: Yeti 1000X user guide, Technical Specifications, PDF page 8, Battery, Lifecycles
Goal Zero's documents disagree. Goal Zero's user guide prints 91 Ah; its product page prints 89.9 Ah. Both are shown as printed, the user guide first; neither is a measurement.
Printed as "Pack Capacity 983Wh (10.8V, 91Ah)".
Where: Yeti 1000X user guide, Technical Specifications, PDF page 8, Battery, Pack Capacity
Sources
89.9 Ah
Printed as "Pack capacity: 997Wh (11.1V, 89.9Ah)" on Goal Zero's Yeti 1000X product page captured September 26, 2026; the user guide prints 91Ah.
Goal Zero's documents disagree. The Yeti 1000X product page prints 997Wh (11.1V, 89.9Ah); the Yeti 1000X user guide prints 983Wh (10.8V, 91Ah). Both are shown; neither has been measured.
Published as "997Wh (11.1V, 89.9Ah)" for the base unit; expansion batteries are sold separately.
Where: Specification table, battery capacity
Sources
983 Wh
Printed as "Pack Capacity 983Wh (10.8V, 91Ah)" in the Yeti 1000X user guide; the product page prints "997Wh (11.1V, 89.9Ah)". Manufacturer claims, not independent tests.
W 259.8 × H 250.4 × L 387.4 mm / W 10.23 × H 9.86 × L 15.25 in converted
Printed as "Dimensions 15.25 x 10.23 x 9.86 in (38.74 x 25.98 x 25.04 cm)". Converted from the printed centimeters (x 10 mm/cm), in the order printed, with the first figure recorded as length as before. Revised on 26 September 2026: The earlier import read the product page's "(38. 74 x 25.98 x 25.04 cm)", which has a stray space inside 38.74, as 74 cm and recorded 740 mm. The Yeti 1000X user guide prints "38.74 x 25.98 x 25.04 cm", and the page's own inch figure (15.25 in) matches 38.74 cm. The earlier value is kept below only as a record of the copying error.
Where: Yeti 1000X user guide, Technical Specifications, PDF page 8, General, Dimensions
Sources
Converted: 38.74 x 25.98 x 25.04 cm x 10 mm/cm
W 259.8 × H 250.4 × L 740 mm
Cabinet dimensions as published ("15.25” x 10.23” x 9.86 in (38. 74 x 25.98 x 25.04 cm)"); clearances are not stated.
Printed as "120V AC Inverter (output, pure sine wave) 120VAC 60Hz, 12.5A (1500W, 3000W surge)"; surge duration not stated. The recorded ports list (from the product page) prints 3500W Surge; both are Goal Zero's figures.
Where: Yeti 1000X user guide, Technical Specifications, PDF page 8, Ports, 120V AC Inverter
Goal Zero's documents disagree. Goal Zero's user guide prints 10.8 V; its product page prints 11.1 V. Both are shown as printed, the user guide first; neither is a measurement.
Printed as "Pack Capacity 983Wh (10.8V, 91Ah)".
Where: Yeti 1000X user guide, Technical Specifications, PDF page 8, Battery, Pack Capacity
Sources
11.1 V
Printed as "Pack capacity: 997Wh (11.1V, 89.9Ah)" on Goal Zero's Yeti 1000X product page captured September 26, 2026; the user guide prints 10.8V.
Printed as "Lifecycles 500 Cycles to 80% capacity (Discharge rate: 1C, Full charge/discharge, Temp: 25C)" in the same maker document as the recorded cycle life; the cycle life ends at 80% of capacity as printed.
Where: Yeti 1000X user guide, Technical Specifications, PDF page 8, Battery, Lifecycles
Charging Port (input, 8mm): 14-50V, up to 10A (150W max); High Power Port HPP (input): 14-50V, up to 50A (600W max)
Printed as "Charging Port (input, 8mm) 14-50V, up to 10A (150W max)" and "High Power Port HPP (input) 14-50V, up to 50A (600W max)". Both ports are recorded; each has its own current and wattage cap. The guide describes both as inputs for charging from Goal Zero solar panels or AC; it prints no separate MPPT range or open-circuit voltage.
Where: Yeti 1000X user guide, PDF page 8, Technical Specifications, Ports: Charging Port (input, 8mm) and High Power Port HPP (input)
997 Wh! Value needs confirmation: Goal Zero's documents disagreeChemistry LI-ion NMC · Cycle life 500 cycles
Rated AC output
1,500 WSurge AC output 3,000 W
Solar input limit
600 W
Solar input voltage
Charging Port (input, 8mm): 14-50V, up to 10A (150W max); High Power Port HPP (input): 14-50V, up to 50A (600W max)
Weight
14.37 kg / 31.68 lbDimensions 259.8 W × 250.4 H × 387.4 L mm / 10.23 W × 9.86 H × 15.25 L in
Evidence score
8/100Missing details40% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Certificates evidence needed; Warranty energy disclosure evidence needed; Cell model disclosure evidence needed.
Power stations · 120 V AC · Rated capacity
The warranty term and the lifetime energy are each scored against the best documented value for a power station: a value earns its share of that best, times the weight. A documented value always earns points; an undisclosed one earns 0.
Printed as "Warranty 24 months" in Goal Zero Yeti 1000X user manual (PDF), Yeti 1000X user guide, Technical Specifications, PDF page 8, General, Warranty. Revised on 1 October 2026: The user guide prints "Warranty 24 months", which is 2 years.
Research pending, 0 points: Certificates, Warranty energy disclosure, Cell model disclosure.
Computed from public specifications and evidence records. Warranty duration is not service quality; certificate evidence points are not a safety rating. Compatibility and installation limits still apply.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
StandardEvidenceStatusSource
FCC Part 15 (Class B digital device)manufacturer claimpresent at observation[2]
Scope
unresolved document set
Covered models
Yeti 1000X
Limitations
Goal Zero's Yeti 1000X user guide prints "This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules." No FCC ID, test report or laboratory is printed beside it in the text read, and no issuer record was read. Manufacturer claim only, recorded as printed.
Printed as "Warranty 24 months" in Goal Zero Yeti 1000X user manual (PDF), Yeti 1000X user guide, Technical Specifications, PDF page 8, General, Warranty. Revised on 1 October 2026: The user guide prints "Warranty 24 months", which is 2 years.
Where: Yeti 1000X user guide, Technical Specifications, PDF page 8, General, Warranty
FCC Part 15 (Class B digital device)Manufacturer claim · unresolved document setClaimedListed when checked
Goal Zero's Yeti 1000X user guide prints "This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules." No FCC ID, test report or laboratory is printed beside it in the text read, and no issuer record was read. Manufacturer claim only, recorded as printed.
Manufacturer user manual PDF published for the Goal Zero Yeti 1000X. It establishes the manufacturer documentation that ships with the model; it does not establish certification listings, seller pricing or current availability.
Archived copies
Archived copy of a document published by Goal Zero. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-26.
Location: Specifications block; BATTERY DETAILS
Retrieved Sep 26, 2026
Goal Zero's own US product page for the Yeti 1000X, captured again on September 26, 2026 (the catalog already archives an earlier capture). It carries no revision date. Its pack capacity, voltage and amp-hours differ from the Yeti 1000X user guide on file. Manufacturer claims, not independent tests.
Manufacturer marketing and specification page for the Goal Zero Yeti 1000X. It establishes the model designation and the figures printed in its specification table on the date read; it does not establish certification, third-party test results, price or availability.
Archived copy of a document published by Goal Zero. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
Yeti 1000X
Manufacturer SKU 36200 · US market · Earlier class: Solar generator
No historical observations recorded yet.
Other recorded fields
Field
Value
Conditions
Source
Evidence breakdown
method version: 0.21-personal
documented pct: 40
basis: nominal
missing:
Certificates evidence needed
Warranty energy disclosure evidence needed
Cell model disclosure evidence needed
criteria:
key: certificateEvidence
label: Certificates
value: 0
unit: evidence points
shown: FCC Part 15 (Class B digital device)
shown detail: Research pending
state: pending
points: 0
ceiling: 45
weight: 45
share: 0
covered: no
missing: yes
folded: yes
reason: Unknown
reason text: Unknown
note: No qualifying applicable evidence recorded. This is not proof that certification is absent. Applies: UL 2743; UL 1973; CEC not applicable to portable power stations; UL 9540 not applicable to portable power stations.