Charged Reviews · Quick reference
Victron Energy 30W-12V Mono 380x450x25mm series 4c (min 5pcs)
- Brand
- Victron Energy
- Model
- 30W-12V Mono 380x450x25mm series 4c (min 5pcs)
- SKU / part number
- SPM040303603 [1]
- Category
- Solar panels
chargedreviews.com/panels/victron-energy-30w-12v-mono-380x450x25mm-series-4c-min-5pcs
Electrical at STC
Temperature and system limits
Cells and construction
Mechanical and connections
Installation (from the manual)
Clearances and orientation
- Mounting methods and clamp zones
- Modules may be ground mounted, mounted on roof tops, vehicles or boats.; Modules must be securely attached to the mounting structure using four mounting points for normal installation.; Module mounting must use the pre-drilled mounting holes in the frame.; If excessive wind or snow loads are expected, all eight mounting holes must be used; 10cm minimum air space between module and mounting surface [4]
Grounding
- Grounding
- The module frame must be properly grounded.; We recommend the lay-in lug(Cat. No. GBL4-DBT is recommended by producer) when grounding.; assemble the recommended ILSCO grounding lug to the aluminum frame using stainless steel M3 or M5 screw and hardware as shown below.; Recommended torque of M3 or M5 screw assembly is 0.8NM or 1.5 NM. [4]
Not in the manual: Torque, Conductors