Charged Reviews · Quick reference
SunPro Power SPDG585-N144M10
- Brand
- SunPro Power
- Model
- SPDG585-N144M10
- SKU / part number
- ?
- Category
- Solar panels
chargedreviews.com/panels/sunpro-power-spdg585-n144m10
Electrical at STC
Temperature and system limits
Cells and construction
Mechanical and connections
Installation (from the manual)
Torque
- Clamp or bolt torque
- 16 to 20 N·m [2]
Conductors
- Cable bending radius / connector notes
- The minimum bending radius of the cables must be 43mm. [2]
Clearances and orientation
- Mounting methods and clamp zones
- PV modules can be installed through clamp method.; Use at minimum 4 clamps to attach modules to the mounting rails.; The clamp must overlap the module frame by at least 7mm but no more than 10mm.; A=1/4L±50mm;L=Module length; Front side: 3600Pa Back side: 1600Pa; S=100~240mm;; Lower; This installation mode is not recommended [2]
Grounding
- Grounding
- On a grounding hole with a diameter of φ4 mm, use a separate grounding wire; M4*12mm bolts and M4 nuts, star washers and plain washers; ground fixation is 4N·m~8N·m; It is recommended to use the copper wire (4-14mm2 or AWG 6-12) [2]