Charged ReviewsSaved 0Compare 0Login
SunPro Power SP415-108M10
SunPro Power
Solar panel

SunPro Power SP415-108M10

Key specs

Rated power415 W
Weight20.3 kg / 44.8 lb converted
Open-circuit voltage37.53 V
Short-circuit current13.97 A
Voltage at max power31.47 V
Current at max power13.19 A

All specifications

Identity

BrandSunPro Power · Website
ModelSP415-108M10
MarketUnknown
Manufacturer SKUUnknown
SKU detail
conditions: Ordering SKU not established.
Sources: No source on record
FieldValueConditionsSource
FrameAnodized aluminum alloy
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "Anodized aluminum alloy". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, STRUCTURAL CHARACTERISTICS / OPERATING PARAMETERS (shared by every model on this datasheet) (Frame)
[1]
Current at max power13.19 A
SunPro Power's SP (395/420W)-108M10 datasheet prints the SP415-108M10 at STC as "415.00 31.47 13.19 37.53 13.97" (Pmax, Vmp, Imp, Voc, Isc); the Maximum power current (Imp) figure reads 13.19. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as SunPro Power's own document prints it (PM, October 17, 2026).
Where: Datasheet, Electrical Characteristics table (STC), SP415-108M10 row, Maximum power current (Imp)
[1]
Short-circuit current13.97 A
SunPro Power's SP (395/420W)-108M10 datasheet prints the SP415-108M10 at STC as "415.00 31.47 13.19 37.53 13.97" (Pmax, Vmp, Imp, Voc, Isc); the Short circuit current (Isc) figure reads 13.97. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as SunPro Power's own document prints it (PM, October 17, 2026).
Where: Datasheet, Electrical Characteristics table (STC), SP415-108M10 row, Short circuit current (Isc)
[1]
Voltage at max power31.47 V
SunPro Power's SP (395/420W)-108M10 datasheet prints the SP415-108M10 at STC as "415.00 31.47 13.19 37.53 13.97" (Pmax, Vmp, Imp, Voc, Isc); the Maximum power voltage (Vmp) figure reads 31.47. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as SunPro Power's own document prints it (PM, October 17, 2026).
Where: Datasheet, Electrical Characteristics table (STC), SP415-108M10 row, Maximum power voltage (Vmp)
[1]
Open-circuit voltage37.53 V
SunPro Power's SP (395/420W)-108M10 datasheet prints the SP415-108M10 at STC as "415.00 31.47 13.19 37.53 13.97" (Pmax, Vmp, Imp, Voc, Isc); the Open circuit voltage (Voc) figure reads 37.53. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as SunPro Power's own document prints it (PM, October 17, 2026).
Where: Datasheet, Electrical Characteristics table (STC), SP415-108M10 row, Open circuit voltage (Voc)
[1]
Cell type108 cells, Mono Crystalline Silicon, 91x182mm(3.58x7.17in)-10BB
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "108 cells, Mono Crystalline Silicon, 91x182mm(3.58x7.17in)-10BB". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, STRUCTURAL CHARACTERISTICS / OPERATING PARAMETERS (shared by every model on this datasheet) (Cell)
[1]
GroundingOn a grounding hole with a diameter of φ4 mm, use a separate grounding wire; M4*12mm bolts and M4 nuts, star washers and plain washers; ground fixation is 4N·m~8N·m; It is recommended to use the copper wire (4-14mm2 or AWG 6-12)
Printed as "On a grounding hole with a diameter of φ4 mm, use a separate grounding wire", "M4*12mm bolts and M4 nuts, star washers and plain washers", "ground fixation is 4N·m~8N·m" and "It is recommended to use the copper wire (4-14mm2 or AWG 6-12)" in the Grounding section of Zhejiang Sunpro's SUNPRO PV MODULES INSTALLATION MANUAL, Regular Modules Installation Manual (no revision printed). The same section also allows grounding by unused mounting holes or other certified grounding devices (UL467) and recommends 10-12 AWG bare copper wire for the traditional method.
Where: PDF page 41, section 5.4.2 (6) Grounding
[2]
Weight20.3 kg / 44.8 lb converted
Read from the datasheet this catalog row already cites, at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a row the sheet prints once for every model it covers, including SP415-108M10. Printed value: "20.3kg(44.75Ib) Maximum system voltage 1000V". Conditions as stated on that sheet. A value the sheet states more than once with different readings was not used.
Where: PDF page 2, row "Weight 20.3kg(44.75Ib) Maximum system voltage"
[1]
Cell count108 cells
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "108 cells, Mono Crystalline Silicon, 91x182mm(3.58x7.17in)-10BB". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, STRUCTURAL CHARACTERISTICS / OPERATING PARAMETERS (shared by every model on this datasheet) (Cell)
[1]
ConnectorsMC4 Compatible Connector
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "MC4 Compatible Connector". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, STRUCTURAL CHARACTERISTICS / OPERATING PARAMETERS (shared by every model on this datasheet) (Connector)
[1]
Front glass3.2mm, ultra clear embossed tempered coated glass
Printed beside the Front glass row label as "3.2mm, ultra clear embossed tempered coated glass" in SunPro Power P-type SPxxx-108M10 395-420W (30mm compatible) datasheet, captured on September 28, 2026.
Where: Page 2, Structural Characteristics table, Front glass row (confirmed by page render; the extracted text runs the row values together but keeps each value contiguous and unscrambled)
[1]
Clamp torque16 to 20 N·m
Printed as "Applied torque should refer to mechanical design standard according to the bolt customer is using, ex: M8 16-20N.m(140-180lbf.in)" in Zhejiang Sunpro's SUNPRO PV MODULES INSTALLATION MANUAL, Regular Modules Installation Manual (no revision printed). Given as an example for an M8 clamp bolt; the manual says the applied torque should follow the mechanical design standard for the bolt used. Printed in N.m first, with 140-180 lbf.in beside it.
Where: PDF page 31, section 5.4.1, Mounting with Clamps, torque sentence
[2]
Junction boxIP68
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "IP68". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, STRUCTURAL CHARACTERISTICS / OPERATING PARAMETERS (shared by every model on this datasheet) (Junction box)
[1]
Rear load pa2,400 Pa
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "+5400Pa/-2400Pta". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, STRUCTURAL CHARACTERISTICS / OPERATING PARAMETERS (shared by every model on this datasheet) (Mechanical load capacity)
[1]
DimensionsW 1,134 × H 1,722 × D 30 mm / W 44.65 × H 67.8 × D 1.2 in converted
Read from the datasheet this catalog row already cites, at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a row the sheet prints once for every model it covers, including SP415-108M10. Printed value: "1722x1134x30mm". Conditions as stated on that sheet. A value the sheet states more than once with different readings was not used.
Where: PDF page 2, row "Module size (L*W*H) 1722x1134x30mm(67.80x44.65x1.18in) Power tolerance 0~+5W"
[1]
Front load pa5,400 Pa
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "+5400Pa/-2400Pta". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, STRUCTURAL CHARACTERISTICS / OPERATING PARAMETERS (shared by every model on this datasheet) (Mechanical load capacity)
[1]
Rated power415 W
SunPro Power's SP (395/420W)-108M10 datasheet prints the SP415-108M10 at STC as "415.00 31.47 13.19 37.53 13.97" (Pmax, Vmp, Imp, Voc, Isc); the Power (Pmax/W) figure reads 415.00. Revised on 17 October 2026: The Internet Archive copy is not a usable source; the fact stays as SunPro Power's own document prints it (PM, October 17, 2026).
Where: Datasheet, Electrical Characteristics table (STC), SP415-108M10 row, Power (Pmax/W)
[1]
Series fuse25 A
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "25A". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, STRUCTURAL CHARACTERISTICS / OPERATING PARAMETERS (shared by every model on this datasheet) (Maximum rated fuse current)
[1]
Mounting methodsPV modules can be installed through clamp method.; Use at minimum 4 clamps to attach modules to the mounting rails.; The clamp must overlap the module frame by at least 7mm but no more than 10mm.; A=1/4L±50mm; +5400Pa/-2400Pa; S=100~240mm; Lower; This installation mode is not recommended
Printed as "PV modules can be installed through clamp method." (PDF page 30, section 5.4.1) and "Use at minimum 4 clamps to attach modules to the mounting rails." (PDF page 31) in Zhejiang Sunpro's SUNPRO PV MODULES INSTALLATION MANUAL, Regular Modules Installation Manual (no revision printed). The clamp table on PDF page 32, row "60/72/108/110/120 /132/144/156pcs Module", gives "+5400Pa/-2400Pa" for clamps at "A=1/4L±50mm" on rails perpendicular to the long side frame, and "Lower" for clamps at "S=100~240mm" on rails perpendicular to the short side frame, of which it says "This installation mode is not recommended". The loads are described there as an empirical value of a standard module; section 5.2 of the same manual calls 3600 (front)/1600 (back) the design pressure, so the manual prints two different load figures. The value lists the long-side clamp position and its load, then the short-side clamp position, its load entry and the table's remark, in the table's order.
Where: PDF pages 30-32, section 5.4.1 Mechanical Installation and Warning, Mounting with Clamps and clamp table
[2]
Cable bend radiusThe minimum bending radius of the cables must be 43mm.
Printed as "The minimum bending radius of the cables must be 43mm." in Zhejiang Sunpro's SUNPRO PV MODULES INSTALLATION MANUAL, Regular Modules Installation Manual (no revision printed), a statement for all its modules' PV cables.
Where: PDF page 35, section 5.4.2 (2) Electrical Connection, cable paragraph
[2]
Max series fuse25 A
SunPro Power's SP (395/420W)-108M10 datasheet prints "0~+5W 1000V 25A" (Power tolerance, Maximum system voltage, Maximum rated fuse current); the Maximum rated fuse current reads 25 A for the series, which includes the SP415-108M10. Revised on 17 October 2026: The fact rested only on an Internet Archive copy of SunPro's installation manual, which is no longer published (its URL now redirects to the home page); SunPro's own live datasheet prints the same value, so the fact is re-cited to it (PM, October 17, 2026).
Where: Datasheet, Operating Parameters, Maximum rated fuse current
[1]
Max system voltage1,500 V Check note
The installation manual prints 1500 V; the data sheet prints 1000 V. Zhejiang Sunpro's installation manual for its regular (single glass) modules prints 1500 V dc as the maximum system voltage in the SP415-108M10 row, while the SunPro Power US data sheet for the SPxxx-108M10 395-420W 30mm Compatible modules prints 1000 V. Check the module label before designing a string.
Printed as "SP415-108M10 37.53 31.47 1500 13.19 13.97 415 Class II" in Zhejiang Sunpro's SUNPRO PV MODULES INSTALLATION MANUAL, Regular Modules Installation Manual (no revision printed), section 3.6 Electrical Rating, the SP415-108M10 row of the SPxxx-108M10 table; the Maximum System Voltage, (V dc) column reads 1500. Revised on 1 October 2026: Zhejiang Sunpro's installation manual prints a maximum system voltage of 1500 V dc in this model's row of its electrical rating table, and the manual comes first in the source order; the recorded 1000 V from the US data sheet is kept as an alternative.
Where: PDF page 15, section 3.6 Electrical Rating, SPxxx-108M10 table, SP415-108M10 row, Maximum System Voltage, (V dc) column
Sources
1,000 V

Read from the datasheet this catalog row already cites, at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a row the sheet prints once for every model it covers, including SP415-108M10. Printed value: "1000V". Conditions as stated on that sheet. A value the sheet states more than once with different readings was not used.

[1]
[2]
Module efficiency21.23 %
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from the column headed SP415-108M10. Printed value: "21.23%". Standard test conditions as stated on that sheet. No value was taken from another model or from a name.
Where: PDF page 2, "Module efficiency" row
[1]
Operating temperature-40 to 85 °C / -40 to 185 °F converted
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "-40~+85℃". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, STRUCTURAL CHARACTERISTICS / OPERATING PARAMETERS (shared by every model on this datasheet) (Operating temperature range)
[1]
Temperature coefficient-0.34 %/°C
Read from the datasheet this catalog row already cites, at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a row the sheet prints once for every model it covers, including SP415-108M10. Printed value: "(TK Pmax) -0.34% / ℃". Conditions as stated on that sheet. A value the sheet states more than once with different readings was not used.
Where: PDF page 2, row "Connector MC4 Compatible Temp. Coefficient of Pmax (TK Pmax) -0.34% / ℃"
[1]
Isc temperature coefficient0.048 %/°C
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "0.048% / ℃". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, TEMPERATURE CHARACTERISTICS (Temp. Coefficient of Isc)
[1]
Voc temperature coefficient-0.27 %/°C
Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a table or row headed by model SP415-108M10. Printed: "-0.27% / ℃". Conditions as stated in that document. No value was taken from another model or from a product name.
Where: page 2, TEMPERATURE CHARACTERISTICS (Temp. Coefficient of Voc)
[1]

Owner reviews

No owner reviews yet
Write a review

Sellers

No listed sellers in this data.

Price history

No seller price history.

Quick reference sheet

Rated output
415 WEfficiency 21.23 %W / sq ft 19.7* (Calculated: 415 W ÷ (1,722 mm × 1,134 mm = 21.02 sq ft) = 19.7 W/sq ft)
Voltage (STC)
31.47 VVmp · maximum powerVoc · open circuit 37.53 VMax system 1,500 VNeeds confirmation
Current (STC)
13.19 AImp · maximum powerIsc · short circuit 13.97 A
Dimensions
W: 1,134 × H: 1,722 × D: 30 mm / W: 44.65 × H: 67.8 × D: 1.2 inWeight 20.3 kg / 44.8 lb
Warranty
12 yearsPower warranty 25 years

Evidence score

55/10084% documented

The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.

Missing for this product: First-year degradation needed.

Each input is scored against the best documented value for a solar panel, and weight per watt against the best in the panel’s own format. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Certificates and unsupported claims do not add points.

Module efficiency21.23 %21.6 / 26.0

21.23 of 25.5 %, the best documented for a solar panel (printed by the maker): AIKO Comet 3N72 AIKO-A690-MDE72Mw 690W Mono-Glass Module

Read from SunPro Power's published document at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from the column headed SP415-108M10. Printed value: "21.23%". Standard test conditions as stated on that sheet. No value was taken from another model or from a name.

[1]

Product warranty12 years8.4 / 21.0

12 of 30 years, the best documented for a solar panel (printed by the maker): AIKO Neostar 3S+54 AIKO-A480-MCE54Db 480W Dual-Glass Module

Printed on the warranty panel of the SunPro Power SP (395/420W)-108M10 datasheet (www.sunpropower.us) as a 12 year "Quality Guarantee" and a 25 year "Power Warranty" under the heading "WARRANTY CERTIFICATE", captured on September 25, 2026, one statement for every model of the SP (395/420W)-108M10 family. The datasheet does not print the warranty terms, exclusions or claim process, and adds "Extended warranty available upon request at additional cost".

[1]

Power warranty25 years13.3 / 16.0

25 of 30 years, the best documented for a solar panel (printed by the maker): AIKO Neostar 3S+54 AIKO-A460-MCE54Db 460W Dual-Glass Module

Printed on the warranty panel of the SunPro Power SP (395/420W)-108M10 datasheet (www.sunpropower.us) as a 12 year "Quality Guarantee" and a 25 year "Power Warranty" under the heading "WARRANTY CERTIFICATE", captured on September 25, 2026, one statement for every model of the SP (395/420W)-108M10 family. The yearly output steps are printed only as chart labels.

[1]

Power temperature coefficient-0.34 %/°C10.4 / 16.0

0.34 against 0.22 %/°C, the lowest documented for a solar panel (printed by the maker): Jackery SolarSaga 100 Air

Read from the datasheet this catalog row already cites, at https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf, from a row the sheet prints once for every model it covers, including SP415-108M10. Printed value: "(TK Pmax) -0.34% / ℃". Conditions as stated on that sheet. A value the sheet states more than once with different readings was not used.

[1]

Weight / watt20.3 kg / 415 W1.3 / 5.0

0.04892 against 0.01227 kg per W, the lowest documented for a solar panel (calculated from maker figures): Go Power! 110-Watt Solar Flex™ Module

20.3 kg / 415 W. Lighter modules per watt carry less roof load. Panel format is not documented, so this is compared with every panel.

[1]

Not documented, 0 points: First-year degradation.

Each input is compared with the best documented value among published solar panels, weight per watt within the same panel format · Method version 0.4

How it works

Certificates

What this shows: what each record says and how far it reaches. It does not mean the product is approved.

Unknown: no certification evidence recorded in this data.

Warranty

FieldValueConditionsSource
Warranty term12 years
Printed on the warranty panel of the SunPro Power SP (395/420W)-108M10 datasheet (www.sunpropower.us) as a 12 year "Quality Guarantee" and a 25 year "Power Warranty" under the heading "WARRANTY CERTIFICATE", captured on September 25, 2026, one statement for every model of the SP (395/420W)-108M10 family. The datasheet does not print the warranty terms, exclusions or claim process, and adds "Extended warranty available upon request at additional cost".
Where: Page 1 warranty panel, Quality Guarantee
[1]
Performance warranty25 years
Printed on the warranty panel of the SunPro Power SP (395/420W)-108M10 datasheet (www.sunpropower.us) as a 12 year "Quality Guarantee" and a 25 year "Power Warranty" under the heading "WARRANTY CERTIFICATE", captured on September 25, 2026, one statement for every model of the SP (395/420W)-108M10 family. The yearly output steps are printed only as chart labels.
Where: Page 1 warranty panel, Power Warranty
[1]

Recalls / legal notices

No recalls on file. All notices · Report a notice

This register is incomplete. A missing notice does not establish that a product has no recalls.

Documents

  • Manuals

  • Zhejiang Sunpro SUNPRO PV MODULES INSTALLATION MANUAL, Regular Modules Installation Manual (English and Chinese, document No. SP-WI-JS-010, no revision printed; Wayback Machine copy of March 23, 2025)Zhejiang Sunpro Power Technology Co., Ltd · Source installation manual · PDF
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Archived copy of https://www.sunpropower.com/sunpropower/2024/09/30/installationintroductionsingleglass.pdf, Wayback Machine snapshot 20250323195433 (March 23, 2025).

    Location: Cover page, contents, section 1 (scope) and section 3.6 (Electrical Rating)

    Retrieved Oct 1, 2026

    Zhejiang Sunpro Power Technology's own installation manual for its single glass solar modules ("REGULAR MODULES INSTALLATION MANUAL", document No. SP-WI-JS-010), English and Chinese. It was obtained from the Internet Archive's Wayback Machine copy of Zhejiang Sunpro's own file at sunpropower.com (snapshot of March 23, 2025), because sunpropower.com now redirects to the SunPro Power US home page and the copy Zhejiang Sunpro posted in January 2026 could not be read; that later file is named for the same revision date as this copy's internal date (July 16, 2024), but its content was not compared. No revision is printed in the document. Its electrical rating table (section 3.6) has a row per power class for each series it names, and its installation sections apply to all the maker's single glass modules; it gives series-level installation instructions and tabulated ratings, and mechanical loads depend on the mounting method. Manufacturer instructions, not independent tests. It names, among others, the SPxxx-108M10 series with rows SP390-108M10 to SP420-108M10.

    Open
  • Other documents

  • SunPro Power P-type Solar Module product pageOfficial · SunPro Power · Official product page · Web page
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-25.

    Location: P-type Solar Module products list

    Retrieved Sep 24, 2026

    SunPro Power North America product page on www.sunpropower.us listing the SPDGxxx-144M10 540-565W, SPxxx-108M10 395-420W series, each with one product image and a link to its datasheet, captured on September 25, 2026. It names series (for example SPDGxxx-N96R12), not individual wattage models, so each image shows the series rather than one wattage.

    Open

Archive and older revisions

Archive and older revisions1

Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.

  • SunPro Power reference documentOfficial · SunPro Power · Official document · PDF
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Exact printed model on selected source revision only; other region documents not used for numeric facts.

    Location: PDF page 2

    Retrieved Sep 15, 2026

    SHA-256: c6bb0682e256bff6b637610c147780d77aa192463a119571a0ead7a20a34a39f

    Archived copies

    Archived copy of a document published by SunPro Power. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupRevision not recorded · 0.85 MB

    Archived copy, unaltered, kept as a record of what SunPro Power published. Original address: https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    Embedded modification date
    Pages
    2

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: c6bb0682e256bff6b637610c147780d77aa192463a119571a0ead7a20a34a39f

    Open

Archived documents

SunPro Power reference document

Archived copy of a document published by SunPro Power. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupRevision not recorded · 0.85 MB

Archived copy, unaltered, kept as a record of what SunPro Power published. Original address: https://www.sunpropower.us/wp-content/uploads/2026/06/P-type-SPxxx-108M10-395-420W-30mm-Compatible.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
Pages
2

Embedded dates are file metadata, not independent proof of publication.

SHA-256: c6bb0682e256bff6b637610c147780d77aa192463a119571a0ead7a20a34a39f

Submit a document

Parts and accessories

No sourced accessories or replacement parts listed yet.

Model history

Model identity

Model
SP415-108M10

No historical observations recorded yet.

Other recorded fields

FieldValueConditionsSource
Evidence breakdown
method version: panels-0.4-personal
documented pct: 84
basis: Unknown
missing:
First-year degradation needed
criteria:
key: efficiency
label: Module efficiency
value: 21.23
unit: Unknown
shown: 21.23 %
shown detail: Unknown
state: documented
points: 21.6
ceiling: 26
weight: 26
share: 83.3
covered: yes
missing: no
folded: no
reason: Unknown
reason text: Unknown
note:
display note: Unknown
Sources: [1]
key: warranty
label: Product warranty
value: 12
unit: Unknown
shown: 12 years
shown detail: Unknown
state: documented
points: 8.4
ceiling: 21
weight: 21
share: 40
covered: yes
missing: no
folded: no
reason: Unknown
reason text: Unknown
note:
display note: Unknown
Sources: [1]
key: performanceWarranty
label: Power warranty
value: 25
unit: Unknown
shown: 25 years
shown detail: Unknown
state: documented
points: 13.3
ceiling: 16
weight: 16
share: 83.3
covered: yes
missing: no
folded: no
reason: Unknown
reason text: Unknown
note:
display note: Unknown
Sources: [1]
key: powerTemperature
label: Power temperature coefficient
value: 0.34
unit: Unknown
shown: -0.34 %/°C
shown detail: Unknown
state: documented
points: 10.4
ceiling: 16
weight: 16
share: 64.7
covered: yes
missing: no
folded: no
reason: Unknown
reason text: Unknown
note:
display note: Unknown
Sources: [1]
key: degradation
label: First-year degradation
value: Unknown
unit: Unknown
shown: Not documented
shown detail: Unknown
state: missing
points: 0
ceiling: 16
weight: 16
share: Unknown
covered: no
missing: yes
folded: yes
reason: undocumented
reason text: Not documented. Undisclosed data scores 0.
note: Not documented.
display note: Unknown
Sources: No source on record
key: weightPerWatt
label: Weight / watt
value: 0.0489
unit: Unknown
shown: 20.3 kg / 415 W
shown detail: Unknown
state: documented
points: 1.3
ceiling: 5
weight: 5
share: 25.1
covered: yes
missing: no
folded: no
reason: Unknown
reason text: Unknown
note: 20.3 kg / 415 W. Lighter modules per watt carry less roof load. Panel format is not documented, so this is compared with every panel.
display note: Unknown
Sources: [1]

Community discussions

No discussions linked yet. Search DIY Solar Forum

Sources

  1. SunPro Power reference document (SunPro Power · manufacturer · observed Sep 15, 2026)
  2. Zhejiang Sunpro SUNPRO PV MODULES INSTALLATION MANUAL, Regular Modules Installation Manual (English and Chinese, document No. SP-WI-JS-010, no revision printed; Wayback Machine copy of March 23, 2025) (Zhejiang Sunpro Power Technology Co., Ltd · archive · observed Oct 1, 2026)

Sign in to report an error on this page

Similar products

All with a price