Charged Reviews · Quick reference
Silfab Solar SIL 580 XM+ DCB
- Brand
- Silfab Solar
- Model
- SIL 580 XM+ DCB
- SKU / part number
- SIL 580 XM+ DCB Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/silfab-solar-sil-580-xm-dcb
Electrical at STC
Temperature and system limits
Cells and construction
- Cell technology
- N-Type Provisional [1]
- Cell count
- ?
- Bifacial
- yes Provisional [1]
- Bifaciality
- ?
- Frame
- Anodized Aluminum (Silver) [4]
- Front glass
- 3.2 mm high transmittance, tempered, anti-reflective coating [4]
- Back cover
- High durability, superior hydrolysis and UV resistance, multi-layer dielectric film, transparent PV backsheet [4]
- Panel format
- ?
Mechanical and connections
Installation (from the manual)
Conductors
- Cable bending radius / connector notes
- Cable bending radius should be at least 60 mm (2 3/8”). [3]
Clearances and orientation
- Mounting methods and clamp zones
- LONG EDGE MOUNTING L Design Load Test Load 0 - 175 +800 / -733 +1200 / -1100 175 - 500 +1066 / -1066 +1600 / -1600 500 - 600 +1600 / -1600 +2400 / -2400; LONG EDGE MOUNTING WITH CENTER SUPPORT L Design Load Test Load 0 - 175 +2000 / -1600 +3000 / -2400 175 - 400 +2000 / -1600 +3000 / -2400; SHORT EDGE MOUNTING L Design Load Test Load 0 - 300 +666 / -600 +1000 / -900; SHORT EDGE MOUNTING WITH CENTER SUPPORT L Design Load Test Load 0 - 300 +2400 / -2400 +3600 / -3600; SHORT EDGE PARALLEL TO RAILS L Design Load Test Load 400 - 450 +3600 / - 1600 +5400 / - 2400 450 - 600 +2400 / - 1600 +3600 / - 2400; LONG EDGE PARALLEL TO RAILS L Design Load Test Load 375 - 475 +1600 / -1600 +2400 / -2400; LONG EDGE TRACKER MOUNTING L Design Load Test Load 400 +1200 / -1200 +1800 / -1800 1400 +1600 / -1600 +2400 / -2400 400 + 1400 +1733 / -1733 +2600 / -2600; M6 or 1/4” corrosion-resistant bolts, nuts, and a locking feature are required; are permitted for the following Silfab Solar product lines: SIL-XXX BK/BG/HC/HC+/QD/HN/HM/QM/XM/ XM+/XL. [3]
Grounding
- Grounding
- A UL listed grounding lug can be bonded to the grounding hole located on the bottom flange of Silfab Solar’s module frame.; The grounding lug should be attached to the frame grounding hole using stainless steel hardware (bolt, serrated flange nut, toothed lock washer, KEPS nut, etc).; Silfab Solar modules may be bonded to a racking or rail system using an integrated grounding method certified to UL 2703. [3]
Not in the manual: Torque