Charged Reviews · Quick reference
Silfab Solar SIL 530 XM DCB
- Brand
- Silfab Solar
- Model
- SIL 530 XM DCB
- SKU / part number
- SIL 530 XM DCB Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/silfab-solar-sil-530-xm-dcb
Electrical at STC
Temperature and system limits
Cells and construction
- Cell technology
- TOPCon Provisional [1]
- Cell count
- ?
- Bifacial
- yes Provisional [1]
- Bifaciality
- ?
- Frame
- Anodized Aluminum (Silver) [4]
- Front glass
- 3.2 mm high transmittance, tempered, antireflective coating [4]
- Back cover
- High durability, superior hydrolysis and UV resistance, multi-layer dielectric film, transparent PV backsheet [4]
- Panel format
- ?
Mechanical and connections
Installation (from the manual)
Conductors
- Cable bending radius / connector notes
- Cable bending radius should be at least 60 mm (2 3/8”). [3]
Clearances and orientation
- Mounting methods and clamp zones
- LONG EDGE MOUNTING L Design Load Test Load 0 - 175 +1066 / -933 +1600 / -1400 175 - 425 +1333 / -1200 +2000 / -1800 425 - 525 +1600 / -1600 +2400 / -2400; LONG EDGE MOUNTING WITH CENTER SUPPORT L Design Load Test Load 0 - 175 +2000 / -1600 +3000 / -2400 175 - 400 +2400 / -2400 +3600 / -3600; SHORT EDGE MOUNTING L Design Load Test Load 0 - 300 +933 / -800 +1400 / -1200; SHORT EDGE MOUNTING WITH CENTER SUPPORT L Design Load Test Load 0 - 300 +2400 / -2400 +3600 / -3600; SHORT EDGE PARALLEL TO RAILS L Design Load Test Load 325 - 475 +3600 / -2400 +5400 / -3600 475 - 575 +2400 / -1600 +3600 / -2400; LONG EDGE PARALLEL TO RAILS L Design Load Test Load 325 - 425 +1600 / -1600 +2400 / -2400; LONG EDGE TRACKER MOUNTING L Design Load Test Load 400 +1200 / -1200 +1800 / -1800 1300 +1600 / -1600 +2400 / -2400 400 + 1300 +1733 / -1733 +2600 / -2600; M6 or 1/4” corrosion-resistant bolts, nuts, and a locking feature are required; are permitted for the following Silfab Solar product lines: SIL-XXX BK/BG/HC/HC+/QD/HN/HM/QM/XM/ XM+/XL. [3]
Grounding
- Grounding
- A UL listed grounding lug can be bonded to the grounding hole located on the bottom flange of Silfab Solar’s module frame.; The grounding lug should be attached to the frame grounding hole using stainless steel hardware (bolt, serrated flange nut, toothed lock washer, KEPS nut, etc).; Silfab Solar modules may be bonded to a racking or rail system using an integrated grounding method certified to UL 2703. [3]
Not in the manual: Torque