3.2 mm high transmittance, tempered, antireflective coating[4]
Back cover
High durability, superior hydrolysis and UV resistance, multi-layer dielectric film, fluorine-free PV backsheet[4]
Panel format
?
Mechanical and connections
Dimensions
?
Weight
?
Connectors
?
Cable length
?
Junction box rating
?
Mounting
?
Design load, front
?
Design load, rear
?
Installation (from the manual)
Conductors
Cable bending radius / connector notes
Cable bending radius should be at least 60 mm (2 3/8”).[5]
Clearances and orientation
Mounting methods and clamp zones
Clamp Long Edge Primary 275.5 - 350.5 +3600 / -2667 +5400 / -4000; Clamp Long Edge Secondary 150.5 - 275.5 +2667 / -2400 +4000 / -3600; Clamp Long Edge Three Rails 150.5 - 350.5 and red zone +3600 / -3600 +5400 / -5400; Clamp Short Edge 200 - 250 +1600 / -1600 +2400 / -2400; M6 or 1/4” corrosion-resistant bolts, nuts, and a locking feature are required; are permitted for the following Silfab Solar product lines: SIL-XXX BK/BG/HC/HC+/QD/HN/HM/QM/XM/ XM+/XL.[5]
Grounding
Grounding
A UL listed grounding lug can be bonded to the grounding hole located on the bottom flange of Silfab Solar’s module frame.; The grounding lug should be attached to the frame grounding hole using stainless steel hardware (bolt, serrated flange nut, toothed lock washer, KEPS nut, etc).; Silfab Solar modules may be bonded to a racking or rail system using an integrated grounding method certified to UL 2703.[5]
Not in the manual: Torque
Page 1 of 2 · Installation values · ? means nothing is recordedAggregated, often community-reported information, not official documentation. Do not rely on it for installation, purchase or compliance decisions; always confirm values with the manufacturer’s official documentation. Charged Reviews accepts no responsibility for errors.
