Charged Reviews · Quick reference
SEG Solar SEG-595-BTA-BG T3
- Brand
- SEG Solar
- Model
- SEG-595-BTA-BG T3
- SKU / part number
- SEG-595-BTA-BG T3[1]
- Category
- Solar panels
Electrical at STC
| Rated output (STC) | 595 W[1]Provisional |
|---|---|
| Module efficiency | ? |
| Voltage at max power (Vmp) | ? |
| Current at max power (Imp) | ? |
| Open-circuit voltage (Voc) | ? |
| Short-circuit current (Isc) | ? |
| Power tolerance | ? |
Temperature and system limits
| Temperature coefficient, Pmax | ? |
|---|---|
| Temperature coefficient, Voc | -0.25 %/°C[3] |
| Temperature coefficient, Isc | ? |
| Maximum system voltage | ? |
| Maximum series fuse | ? |
| NOCT / NMOT | ? |
| Rated output at NMOT | ? |
| Operating temperature | ? |
Cells and construction
| Cell technology | ? |
|---|---|
| Cell count | ? |
| Bifacial | Yes[1]Provisional |
| Bifaciality | ? |
| Frame | ? |
| Front glass | ? |
| Back cover | ? |
| Panel format | ? |
Mechanical and connections
| Dimensions | ? |
|---|---|
| Weight | ? |
| Connectors | ? |
| Cable length | ? |
| Junction box rating | ? |
| Mounting | ? |
| Design load, front | ? |
| Design load, rear | ? |
Installation (from the manual)
Torque
| Clamp or bolt torque | 16 to 20 N·m(141.61 to 177.01 in-lb*)[4] |
|---|
Clearances and orientation
| Mounting methods and clamp zones | Screw installation (Table 2): Four outer mounting holes, +5400/-2400 Pa; Clamp installation (Table 3), clamp length ≥50mm, Mounting rail cross the long side, L=A/4±50mm: +5400/-2400 Pa; Clamp installation (Table 3), clamp length ≥50mm, Mounting rail parallel the long side, L=A/4±50mm: +2400/-2400 Pa; Clamp installation (Table 3), clamp length ≥50mm, Mounting rail cross the short side, W=B/4±50mm: +3600/-2400 Pa; Clamp installation (Table 3), clamp length ≥50mm, Mounting rail parallel the short side, W=B/4±50mm: not given (/); Tracker installation (Table 4): Nextracker 400mm hole distance +2400/-2400 790mm hole distance +3150/-2550; Other installation, Method A six clamps (Table 5): clamp ≥80mm, A/4±50, +5400/-3600 Pa; Method B four screws plus four clamps (Table 6): +5400/-3600 Pa[4] |
|---|
Grounding
| Grounding | A bonding or toothed washer is required to make proper and reliable electrical grounding connection with the anodized aluminum frame.; Consider using a lay-in lug, rated for outdoor use, if the module grounding conductor is to be larger than 10 AWG.[4] |
|---|
Not in the manual: Conductors
Page 1 of 2 · Installation values · ? means nothing is recordedAggregated, often community-reported information, not official documentation. Do not rely on it for installation, purchase or compliance decisions; always confirm values with the manufacturer’s official documentation. Charged Reviews accepts no responsibility for errors.