Charged Reviews · Quick reference
Qcells Q.PEAK DUO XL-G10.3/BFG 480
- Brand
- Qcells
- Model
- Q.PEAK DUO XL-G10.3/BFG 480
- SKU / part number
- Q.PEAK DUO XL-G10.3/BFG 480 Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/qcells-q-peak-duo-xl-g10-3-bfg-480
Electrical at STC
Temperature and system limits
Cells and construction
Mechanical and connections
Installation (from the manual)
Conductors
- Cable bending radius / connector notes
- Comply with bending radius of ≥ 2.36 in (60 mm) [3]
Clearances and orientation
- Mounting methods and clamp zones
- CL1a, clamps at 11.8 - 21.6 in (300 - 550 mm): test load push / pull 5400 / 3000 Pa, design load push / pull 3600 / 2000 Pa; CL1b, clamps at 11.8 - 21.6 in (300 - 550 mm): test load 2900 / 3000 Pa, design load 1930 / 2000 Pa; FB1, mounting slots at 17.9 in (454 mm): test load 5400 / 3000 Pa, design load 3600 / 2000 Pa; FB2 and mFB2, mounting slots at 17.9 in (454 mm), and CL3, clamps at 11.8 - 21.6 in (300 - 550 mm): test load 3600 / 3000 Pa, design load 2400 / 2000 Pa; mCL3, clamps at 11.8 - 21.6 in (300 - 550 mm): test load 3300 / 3000 Pa, design load 2200 / 2000 Pa; CL5, short side 0.8 - 3.9 in (20 - 100 mm), long side 19.7 - 23.6 in (500 - 600 mm): test load 2400 / 2400 Pa, design load 1600 / 1600 Pa; Tracker options: TB1b and TB2b 3000 / 3000 Pa (design 2000 / 2000 Pa); TB1a 2400 / 2400 Pa (design 1600 / 1600 Pa); TB2a 2700 / 2400 Pa (design 1800 / 1600 Pa); TC1 2200 / 2200 Pa (design 1460 / 1460 Pa); Only under certain conditions: CL1a at 0.8 - 21.6 in (20 - 550 mm) 2000 / 2000 Pa (design 1330 / 1330 Pa); CL2b at 0.8 - 3.9 in (20 - 100 mm) 1600 / 1600 Pa (design 1060 / 1060 Pa) [3]
Grounding
- Grounding
- Option A: Use of a grounding lug. A listed grounding lug can be bonded to the frame using the grounding holes pre-drilled in the frame.; The grounding lug should be attached to the frame grounding hole using a stainless steel screw, toothed lock washer or KEPS nut (in order to penetrate the anodized layer) and backing nut.; Option B: Integrated grounding methods. The Q CELLS modules can be bonded with the racking system using UL61730 or UL2703 certified integrated grounding methods. [3]
Not in the manual: Torque