Charged Reviews · Quick reference
LONGi Solar LR5-72HBD-535M DOM
- Brand
- LONGi Solar
- Model
- LR5-72HBD-535M DOM
- SKU / part number
- LR5-72HBD-535M DOM Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/longi-solar-lr5-72hbd-535m-dom
Electrical at STC
Temperature and system limits
- Temperature coefficient, Voc
- ?
- Temperature coefficient, Isc
- ?
- Maximum series fuse
- ?
- NOCT / NMOT
- ?
- Rated output at NMOT
- ?
- Operating temperature
- ?
Cells and construction
- Cell technology
- Monocrystalline Provisional [1]
- Cell count
- ?
- Bifaciality
- ?
- Frame
- Anodized aluminum alloy frame [2]
- Front glass
- Dual glass, 2.0+2.0mm heat strengthened glass/ 3.2mm coated tempered glass + 2.0mm heat strengthened glass [2]
- Back cover
- Dual glass, 2.0+2.0mm heat strengthened glass/ 3.2mm coated tempered glass + 2.0mm heat strengthened glass [2]
- Panel format
- ?
Mechanical and connections
Installation (from the manual)
Torque
- Clamp or bolt torque
- 12 to 16 N·m [3]
Conductors
- Cable bending radius / connector notes
- The minimum allowed bending radius of cables should be 43mm. (1.69 inch) [3]
Clearances and orientation
- Mounting methods and clamp zones
- Bolts Mounting: Outer Four-hole, mounting rails cross the long frame (Method ②) +5400,-2400 Pa; Outer Four-hole, mounting rails parallel the long frame (Method ①) +3600,-2400 Pa; Inner Four-hole (Method ③) not given (/); Clamps Mounting, mounting rails cross the long frame (Method ⑥): 450≤D≤550 +5400,-2400 Pa (350≤D≤450 and 500≤D≤600 not given); Clamps Mounting, mounting rails parallel the long frame (Method ⑤): 450≤D≤550 +3600,-2400 Pa (350≤D≤450 and 500≤D≤600 not given) [3]
Grounding
- Grounding
- There are grounding holes with the diameter of Ø4.2 mm at the edge location of module's back-side frame.; The copper core wire used for the grounding clamp is recommended to be 12 AWG.; Align grounding clamp to the frame mounting hole. Use grounding bolt to go through the grounding clamp and frame.; Put the tooth side of the washer on the other side and fasten the nuts. [3]