Charged Reviews · Quick reference
LONGi Solar LR5-54HABB-395M-V5
- Brand
- LONGi Solar
- Model
- LR5-54HABB-395M-V5
- SKU / part number
- LR5-54HABB-395M-V5 Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/longi-solar-lr5-54habb-395m-v5
Electrical at STC
Temperature and system limits
Cells and construction
Mechanical and connections
Installation (from the manual)
Torque
- Clamp or bolt torque
- 12 to 16 N·m [3]
Conductors
- Cable bending radius / connector notes
- The minimum allowed bending radius of cables should be 43mm. (1.69 inch) [3]
Clearances and orientation
- Mounting methods and clamp zones
- Bolts Mounting, mounting rails cross the long frame: Outer Four-hole (Method ②) ±2400 Pa; Inner Four-hole (Method ④) +5400,-2400 Pa; Clamps Mounting, mounting rails cross the long frame, 250≤D≤350 (Method ⑥): +5400,-2400 Pa; Clamps Mounting, mounting rails cross the short frame, 150≤E≤250 (Method ⑦): +2400,-1800 Pa; Clamps mounted at the corners of short frame (Method ⑧): not given (/) [3]
Grounding
- Grounding
- There are grounding holes with the diameter of Ø4.2 mm at the edge location of module's back-side frame.; The copper core wire used for the grounding clamp is recommended to be 12 AWG.; Align grounding clamp to the frame mounting hole. Use grounding bolt to go through the grounding clamp and frame.; Put the tooth side of the washer on the other side and fasten the nuts. [3]