Charged Reviews · Quick reference
LG Electronics LG365N1C-N5 365W NeON 2 Solar Panel
- Brand
- LG Electronics
- Model
- LG365N1C-N5
- SKU / part number
- ?
- Category
- Solar panels
chargedreviews.com/panels/lg-electronics-lg365n1c-n5
Electrical at STC
Temperature and system limits
- Temperature coefficient, Pmax
- -0.34 %/°C [1]
- Temperature coefficient, Voc
- -0.26 %/°C [1]
- Temperature coefficient, Isc
- 0.03 %/°C [1]
- Maximum system voltage
- 1,000 V [1]
- Maximum series fuse
- 20 A Needs confirmation [2]
- NOCT / NMOT
- 42 °C / 108 °F converted Needs confirmation [2]
- Rated output at NMOT
- 273.9 W Needs confirmation [2]
- Operating temperature
- -40 to 90 °C / -40 to 194 °F converted [1]
Cells and construction
Mechanical and connections
Installation (from the manual)
Torque
- Clamp or bolt torque
- 8 to 12 N·m Needs confirmation [2]
Conductors
- Cable bending radius / connector notes
- Cable bending radius should be more than 4 times the cable diameter, at least. Needs confirmation [2]
Clearances and orientation
- Mounting methods and clamp zones
- Module Strength(Basic Load) ; IEC61215-2:2016: 60Cell, Front Side: Design Load 3600 Pascal, Test Load 5400 Pascal; Rear Side: Design Load 2650 Pascal, Test Load 4000 Pascal; mounting distance ① : 200mm ② : 300mm, by using frame bolt holes; Fig 1. Bolting type(M8): Position 200 or 300 (mm); Load Front/Rear 5400/4000 (Pa); Fig 2. Clamping Type: Position 200 ~ 400 (mm); Load Front/Rear 5400/4000 (Pa); Fig 3. Clamping Type: A 0~50, B 0~650 (mm); Load Front/Rear 2400/2400 (Pa); Fig 4. Clamping Type: Position 200 ~ 400 (mm); Load Front/Rear 5400/4000 (Pa); Fig 5. Clamping Type: Position 0 ~ 300 (mm); Load Front/Rear 5400/2155 (Pa); Fig 6. Clamping Type: A 0~300 (mm), Load Front/Rear 2400/2155 (Pa); B 800~900 (mm), Load Front/Rear 5400/4000 (Pa); Fig 7. Clamping Type: Position 200 ~ 400 (mm); Load Front/Rear 4000/4000 (Pa); Fig 8. Clamping Type: A 0~50, B 0~650 (mm); Load Front/Rear 2400/2400 (Pa); Fig 9. Clamping Type: A 0~300, B 200~400 (mm); Load Front/Rear 2400/2155 (Pa); Fig 10. Clamping Type: A 200~400, B 0~300 (mm); Load Front/Rear 2155/2155 (Pa); Clamp width 40mm (1.57in). Clamp height compliant with a 40mm(1.57in) frame height. Clamp depth 8~10mm(0.31~0.39in). Needs confirmation [2]
Grounding
- Grounding
- One M4 stainless steel bolt, one nut, one spring washer, two flat washers, one cup washer, one star washer and 12 AWG Cu wires are recommended per mounting hole.; There is an earth hole on the edge of the module frame.; All screws and nuts shall be tightened to a torque of 4~5 N∙m. Needs confirmation [2]