About brandGo Power! began as a Canadian distributor of solar energy products in 1996 and now sells solar chargers, inverters, charge controllers and power accessories for RVs, boats, overland vehicles and work fleets. It is part of the Dometic family of products.
SKU detail
conditions: Go Power! prints the model GP-PV-200-M12-RN on its product page and datasheet but no separate part number for it, as captured on September 25, 2026.
Sources: No source on record
No spec by that name.
Units
Field
Value
Conditions
Source
Frame
Anodized aluminum frame
Printed as "Materials Anodized aluminum frame; tempered glass" and "Frame finish Available in black or silver", captured on September 25, 2026.
Where: Product page Specifications, Materials and Frame finish
Printed as "Cell type Monocrystalline"; the overview describes "M12 monocrystalline cells with 18 busbars", captured on September 25, 2026. The page's "Cell efficiency 25.7%" is a cell figure and is not recorded as module efficiency.
Printed as "Tighten the bolts to 100 in lbf (11.3 Nm) using a 3/8” socket." in the Go Power! RV Solar Power Kits User Manual (56587_MANUAL_GP_RV-KITS-SYSTEMS_RevP, March 2026), section 4.1.2 L-Bracket Mounting Feet (mounting foot bolts into the panel frame's rivet nuts). The manual prints the figure first in inch pounds-force ("in lbf") and then 11.3 Nm.
Recorded as rigid because Go Power! prints "Materials Anodized aluminum frame; tempered glass" and describes a "Rigid, aluminum framed monocrystalline module", captured on September 25, 2026.
The mounting feet must be installed in the 4 rivet nuts in the panel frame.; All 4 mounting feet must be used on a solar panel.; The mounting surface must be at least 1/2” thick and strong enough to support the solar panel mounting hardware.
Printed as "The mounting feet must be installed in the 4 rivet nuts in the panel frame." in the Go Power! RV Solar Power Kits User Manual (56587_MANUAL_GP_RV-KITS-SYSTEMS_RevP, March 2026), section 4.1.2 L-Bracket Mounting Feet, which applies to the 200W ShadeTech Solar Panel (the parts checklist on PDF page 7 pairs that panel with the L-Bracket Mounting Hardware Kit). Kit installation on an RV roof; no mechanical load rating is printed.
Where: PDF page 12, section 4.1.2 L-Bracket Mounting Feet
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing for this product: Module efficiency needed; Product warranty needed; Power temperature coefficient needed; First-year degradation needed.
Each input is scored against the best documented value for a solar panel, and weight per watt against the best in the panel’s own format. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Certificates and unsupported claims do not add points.
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-25.
Location: Overview (MODEL line); Specifications tab; Documents list
Retrieved Sep 24, 2026
Go Power!'s own product page, captured on September 25, 2026. The Specifications tab prints no test condition for its electrical figures, and the page's Spec Sheet link, labeled "Spec Sheet (GP-PV-200M)", opens the datasheet of the earlier GP-PV-200M, so no ShadeTech datasheet is cited.