Charged Reviews · Quick reference
CW Energy CWT450-108TNB10
- Brand
- CW Energy
- Model
- CWT450-108TNB10
- SKU / part number
- ?
- Category
- Solar panels
chargedreviews.com/panels/cw-energy-cwt450-108tnb10
Electrical at STC
- Module efficiency
- 23.04 % [3]
- Power tolerance
- ?
Temperature and system limits
Cells and construction
Mechanical and connections
- Weight
- ?
- Connectors
- ?
- Cable length
- ?
- Junction box rating
- IP68 (junction box) [3]
- Mounting
- ?
- Design load, front
- ?
- Design load, rear
- ?
Installation (from the manual)
Torque
- Clamp or bolt torque
- 12 to 16 N·m [1]
Clearances and orientation
- Mounting methods and clamp zones
- Modules can be installed on the frame using mounting holes, clamps, or an insertion system.; Width: Clamp A no less than 38mm, Clamp B no less than 50mm; Bolt: M8; L2-L1: 280-380 mm; Figure 4 layouts: STATIC LOAD +2400Pa/-2400Pa, +5400Pa/-2400Pa, +3600Pa/-2400Pa, +2400Pa/-2400Pa [1]
Grounding
- Grounding
- The frame rails have pre-drilled holes marked with a bonding sign. These holes should be used for bonding purposes and must not be used for mounting the Modules.; There is a bonding hole with 4.2 mm diameter on the edge side closer to the middle of the back frame of the Modules.; The recommended twist torque value is 2.3 N.m.; The recommended torque of locking the nut is 2.0 Nm-2.2 Nm. [1]
Not in the manual: Conductors