Charged Reviews · Quick reference
Canadian Solar CS7N-650MB-AG
- Brand
- Canadian Solar
- Model
- CS7N-650MB-AG
- SKU / part number
- CS7N-650MB-AG Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/canadian-solar-cs7n-650mb-ag
Electrical at STC
- Voltage at max power (Vmp)
- ?
- Current at max power (Imp)
- ?
- Open-circuit voltage (Voc)
- ?
- Short-circuit current (Isc)
- ?
- Power tolerance
- ?
Temperature and system limits
- Temperature coefficient, Voc
- ?
- Temperature coefficient, Isc
- ?
- Maximum series fuse
- ?
- NOCT / NMOT
- ?
- Rated output at NMOT
- ?
Cells and construction
Mechanical and connections
Installation (from the manual)
Conductors
- Cable bending radius / connector notes
- A minimum bending radius of 60 mm (2.36 in) is required when securing the junction box cables to the racking system. Needs confirmation [4]
Clearances and orientation
- Mounting methods and clamp zones
- Bolting, Table 3: CS7N-MB-AG (F46 Frame) outer four holes O-A +5400Pa/ -2400Pa, O-B +2800Pa/ -2400Pa; CS7N-MB-AG (F43 Frame) O-A +5400Pa/ -2400Pa, O-B +3600Pa/ -2400Pa; inner and middle holes not tested; 6.2.1 Clamp mounting on long side of frame and rails perpendicular to the long side frame, row "CS7N-MB-AG CS7N-TB-AG (F46 Frame)": A Range 450-550 mm at +5400/-2400 Pa; 6.2.3 Clamp mounting on long side of frame and rails parallel to the long side frame: CS7N-MB-AG (F43 frame) A1 Range 400-500 mm at +3600/-2400 Pa; CS7N-MB-AG (F46 frame) 400-500 mm at +2800/-2400 Pa Needs confirmation [4]
Grounding
- Grounding
- GROUNDING METHOD: BOLT + TOOTHED NUT + CUP WASHER.; we recommend using 4-14 mm² (AWG 6-12) copper wire.; Ensure that the cup washer is positioned between the frame and the wire with the concave side up to prevent galvanic corrosion.; The tightening torque is 3-7 Nm (2.2-5.2 ft-lbs). Needs confirmation [4]
Not in the manual: Torque