Charged Reviews · Quick reference
Canadian Solar CS6W-545MB-AG
- Brand
- Canadian Solar
- Model
- CS6W-545MB-AG
- SKU / part number
- CS6W-545MB-AG Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/canadian-solar-cs6w-545mb-ag
Electrical at STC
- Module efficiency
- 21.2 % [2]
- Voltage at max power (Vmp)
- ?
- Current at max power (Imp)
- ?
- Open-circuit voltage (Voc)
- ?
- Short-circuit current (Isc)
- ?
- Power tolerance
- ?
Temperature and system limits
- Temperature coefficient, Voc
- -0.26 %/°C [3]
- Temperature coefficient, Isc
- ?
- Maximum series fuse
- ?
- NOCT / NMOT
- ?
- Rated output at NMOT
- ?
- Operating temperature
- ?
Cells and construction
Mechanical and connections
- Weight
- 32.2 kg / 71 lb converted [2]
- Connectors
- ?
- Cable length
- ?
- Junction box rating
- ?
- Mounting
- ?
- Design load, front
- ?
- Design load, rear
- ?
Installation (from the manual)
Conductors
- Cable bending radius / connector notes
- A minimum bending radius of 60 mm (2.36 in) is required when securing the junction box cables to the racking system. Needs confirmation [4]
Clearances and orientation
- Mounting methods and clamp zones
- Bolting, Table 3, CS6W-MB-AG (F47 & F42 Frame): outer four holes O-A +5400Pa/ -2400Pa; other hole sets not tested; 6.2.1 Clamp mounting on long side of frame and rails perpendicular to the long side frame: CS6W-MB-AG (F47 & F47L Frame) A Range 300-600 mm at +3600/-2400 Pa, 450-550 mm at +5400/-2400 Pa; CS6W-MB-AG (F42 Frame) A Range 300-600 mm at +3600/-2400 Pa, 400-500 mm at +5400/-2400 Pa; 6.2.3 Clamp mounting on long side of frame and rails parallel to the long side frame, CS6W-MB-AG (F47 & F42 Frame): A1 Range 400-500 mm at +4000/-3200 Pa Needs confirmation [4]
Grounding
- Grounding
- GROUNDING METHOD: BOLT + TOOTHED NUT + CUP WASHER.; we recommend using 4-14 mm² (AWG 6-12) copper wire.; Ensure that the cup washer is positioned between the frame and the wire with the concave side up to prevent galvanic corrosion.; The tightening torque is 3-7 Nm (2.2-5.2 ft-lbs). Needs confirmation [4]
Not in the manual: Torque