Charged Reviews · Quick reference
Canadian Solar CS6R-400MS-HL
- Brand
- Canadian Solar
- Model
- CS6R-400MS-HL
- SKU / part number
- CS6R-400MS-HL Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/canadian-solar-cs6r-400ms-hl
Electrical at STC
Temperature and system limits
Cells and construction
Mechanical and connections
- Weight
- 22.4 kg / 49.4 lb converted [2]
- Connectors
- ?
- Cable length
- ?
- Junction box rating
- ?
- Mounting
- ?
- Design load, front
- ?
- Design load, rear
- ?
Installation (from the manual)
Conductors
- Cable bending radius / connector notes
- A minimum bending radius of 60 mm (2.36 in) is required when securing the junction box cables to the racking system. Needs confirmation [3]
Clearances and orientation
- Mounting methods and clamp zones
- Bolting, Table 3, CS6R-MS-HL: inner four holes I-A +5400Pa/ -4000Pa*, I-B +5400Pa/ -4000Pa* (*: D-type washer with outer diameter 23mm); middle and outer holes not tested; 6.2.1 Clamp mounting on long side of frame and rails perpendicular to the long side frame, CS6R-MS-HL: A Range 0-100 mm at +2400/-2400 Pa, 100-600 mm at +3600/-2400 Pa, 250-550 mm at +5400/-3600 Pa, 400-500 mm at +7000/-5400 Pa; 6.2.2 Clamp mounting on short side of frame and rails perpendicular to the long side frame, CS6R-MS-HL: A Range 0-200 mm at +2400/-2400 Pa, 200-250 mm at +2600/-2400 Pa; 6.2.3 Clamp mounting on long side of frame and rails parallel to the long side frame, CS6R-MS-HL: A1 Range 100-600 mm at +4000/-2400 Pa, 450-550 mm at +5400/-2400 Pa Needs confirmation [3]
Grounding
- Grounding
- GROUNDING METHOD: BOLT + TOOTHED NUT + CUP WASHER.; we recommend using 4-14 mm² (AWG 6-12) copper wire.; Ensure that the cup washer is positioned between the frame and the wire with the concave side up to prevent galvanic corrosion.; The tightening torque is 3-7 Nm (2.2-5.2 ft-lbs). Needs confirmation [3]
Not in the manual: Torque