Charged Reviews · Quick reference
Canadian Solar CS6.2-66TB-620H
- Brand
- Canadian Solar
- Model
- CS6.2-66TB-620H
- SKU / part number
- CS6.2-66TB-620H Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/canadian-solar-cs6-2-66tb-620h
Electrical at STC
- Voltage at max power (Vmp)
- ?
- Current at max power (Imp)
- ?
- Open-circuit voltage (Voc)
- ?
- Short-circuit current (Isc)
- ?
- Power tolerance
- ?
Temperature and system limits
- Temperature coefficient, Voc
- -0.25 %/°C [3]
- Temperature coefficient, Isc
- ?
- Maximum series fuse
- ?
- NOCT / NMOT
- ?
- Rated output at NMOT
- ?
- Operating temperature
- ?
Cells and construction
Mechanical and connections
Installation (from the manual)
Torque
- Clamp or bolt torque
- 16 to 20 N·m [4]
Conductors
- Cable bending radius / connector notes
- A minimum bending radius of 60 mm (2.36 in) is required when securing the junction box cables to the racking system. [4]
Clearances and orientation
- Mounting methods and clamp zones
- Bolting, Table 3, CS6.2-66TB-H: outer four holes O-A +5400Pa/ -4000Pa*, O-B +5400Pa/ -4000Pa* (*: D-type washer with outer diameter 23mm); inner and middle holes not tested; 6.2.1 Clamp mounting on long side of frame and rails perpendicular to the long side frame, CS6.2-66TB-H: A Range 100-600 mm at +1800/-1800 Pa, 300-600 mm at +4000/-2800 Pa, 450-550 mm at +5400/-4000 Pa; 6.2.2 Clamp mounting on short side of frame and rails perpendicular to the long side frame, CS6.2-66TB-H: A Range 60-250 mm at +1400/-1400 Pa; 6.2.3 Clamp mounting on long side of frame and rails parallel to the long side frame, CS6.2-66TB-H: A1 Range 100-500 mm at +3600/-2400 Pa, 400-500 mm at +5400/-3200 Pa [4]
Grounding
- Grounding
- GROUNDING METHOD: BOLT + TOOTHED NUT + CUP WASHER.; we recommend using 4-14 mm² (AWG 6-12) copper wire.; Ensure that the cup washer is positioned between the frame and the wire with the concave side up to prevent galvanic corrosion.; The tightening torque is 3-7 Nm (2.2-5.2 ft-lbs). [4]